Panasonic Digital Camera Dmc Gf1c Gf1k Gf1 Operating Instructions

151VQT2G44
Connecting to other equipment
Saving the recorded still pictures and motion 
pictures
Methods to export still pictures and motion pictures to other devices will vary depending on 
the file format. (JPEG, RAW, AVCHD Lite, or Motion JPEG). Here are a few suggestions.
File formats that can be used: [AVCHD Lite], [Motion JPEG]
Copy images played back with this unit to DVD disc, hard disk, or video using a DVD 
recorder, or video.
This can be played back with equipment that is not compatible with...

VQT2G44152
Connecting to other equipment
File formats that can be used: [JPEG], [RAW]/[AVCHD Lite], [Motion JPEG]
It is possible to acquire still pictures and motion pictures recorded in [AVCHD Lite] or 
[MOTION JPEG] formats, or create standard quality DVD video which is not high definition 
from the motion picture that was recorded as [AVCHD Lite], using the software 
“PHOTOfunSTUDIO 4.0 HD Edition” in the CD-ROM (supplied). (P152)
If the files and folders related to [AVCHD Lite] motion pictures 
are...

153VQT2G44
Connecting to other equipment
Connect the camera to a PC via the USB connection cable A 
(supplied).
 Do not use any other USB connection cables except the supplied one. Use of 
cables other than the supplied USB connection cable may cause malfunction.
Press 3/4 to select [PC], and then press [MENU/SET].
If [USB MODE] (P34) is set to [PC] in the [SETUP] menu in 
advance, the camera will be auto matically connected to the PC 
without displaying the [USB MODE] selection screen. Since 
there is...

VQT2G44154
Connecting to other equipment
Using a drag-and-drop operation, move the pictures you want to 
acquire or the folder storing those pictures to any different folder on 
the PC.
∫Disconnecting the USB connection cable safelyProceed with the hardware removal using “Safely Remove Hardware” on the task tray of the 
PC. If the icon is not displayed, check that [ACCESS] is not displayed on the LCD monitor of 
the digital camera before removing the hardware.
NoteTurn the camera off before connecting or...

155VQT2G44
Connecting to other equipment
Printing the Pictures
If you connect the camera to a printer supporting PictBridge, you can select the pictures to 
be printed out and instruct that printing be started on the camera’s LCD monitor.
Connect the camera to a printer via the USB connection cable A 
(supplied).
 When the camera is connected to the printer, the cable disconnect prohibit icon [ å] 
appears. Do not disconnect the USB cable while [ å] is displayed.
Press  3/4 to select [PictBridge(PTP)],...

VQT2G44156
Connecting to other equipment
¢Only when [FAVORITE] is at [ON] and when there are pictures set as favorites. (P134)
Selecting a single picture and printing it
Press 2/ 1 to select the picture and then press 
[MENU/SET].
 The message disappears in about 2 seconds.
Press 3 to select [PRINT START] and then press 
[MENU/SET].
Refer to P157 for the items which can be set before starting to 
print the pictures.
 Press [MENU/SET] to cancel printing halfway.
 Disconnect the USB connection cable after...

157VQT2G44
Connecting to other equipment
Select and set the items both on the screen in step 2 of the 
“Selecting a single picture and printing it ” and in step 3 of the 
“Selecting multiple pictures and printing them ” procedures.
 When you want to print pictures on a paper size or a layout which is 
not supported by the camera, set [PAPER SIZE] or [PAGE LAYOUT] 
to [ {] and then set the paper size or the layout on the printer. (For 
details, refer to the operating instructions of the printer.)
 When...

VQT2G44158
Connecting to other equipment
Paper sizes not supported by the printer will not be displayed.
 An item cannot be selected if the printer does not support the page layout.
∫ Layout printing
When printing a picture several times on 1 sheet of paper
For example, if you want to print the same picture 4 times on 1 sheet of paper, set 
[PAGE LAYOUT] to [ ä] and then set [NUM. OF PRINTS] to 4 for the picture that you 
want to print.
When printing different pictures on 1 sheet of paper
For example, if...

159VQT2G44
Others
OthersUsing the Optional External Viewfinder
When using the external live viewfinder (DMW-LVF1; optional), you can view the recording 
screen even when taking pictures with a low camera angle.
Preparations: 
Turn off the camera.
 Remove the hot shoe cover that is attached to the camera. (P14)
Insert the optional external viewfinder fully and securely into the hot 
shoe
 Press the lower part of the external viewfinder with your 
finger, and securely insert the connector as well.
(Do not...

VQT2G44160
Others
∫Diopter adjustment
Adjust the diopter to suit your vision so that 
you can see the Viewfinder clearly.
Look at the display on the Viewfinder and 
rotate the diopter adjustment dial to 
where the screen is clearest.
A diopter adjustment dial
B [LVF/LCD]
∫ About the settings for recording with a low camera angle
Based on the camera angle, set the angle of the optional 
external viewfinder for easy viewing 
(from approximately 0 o - 90o)
Do not open beyond 90o. Doing so may cause damage....