Panasonic Digital Camera Dmc G85 Owners Manual

301
11. Connecting to other equipment
•Disconnect the USB connection cable after printing.
•Use a battery with sufficient battery power or the AC adaptor (optional). If the remaining battery 
power becomes low while the camera and the printer are connecte d, the status indicator blinks 
and the alarm beeps. If this happens during printing, stop prin ting at once. If not printing, 
disconnect the USB connection cable.
•Do not disconnect the USB connection cable while [ å] (Cable disconnect prohibit icon)...

11. Connecting to other equipment
302
∫Print Settings
Select and set the items both on the screen in step 2 of the “Selecting a single picture and 
printing it” and in step 
3 of the “Selecting multiple pictures and printing them” procedu res.
•
When you want to print pictures on a paper size or a layout whi ch is not supported by the 
camera, set [Paper Size] or [Page Layout] to [ {] and then set the paper size or the layout on 
the printer.
(For details, refer to the operating instructions of the...

303
11. Connecting to other equipment
Enjoying 3D pictures
Attaching the 3D interchangeable lens (H-FT012: optional) to the camera allows you to 
take 3D pictures for extra impact.
1Attach the 3D interchangeable lens to the camera.
2Bring the subject into the frame and record by pressing the shu tter 
button fully.
•Focusing is not required when recording 3D pictures.
•Still pictures recorded with the 3D interchangeable lens attach ed are saved in MPO 
format (3D).
•It is recommended to use a tripod or a...

11. Connecting to other equipment
304
Connecting the camera to a 3D compatible television and playing back pictures taken in 
3D allows you to enjoy 3D pictures for extra impact.
Connect the unit to a 3D compatible television using the HDMI m icro cable 
and display the playback screen.  (P290)
•When [VIERA Link] is set to [ON] and the camera is connected to  a TV supporting VIERA Link, 
input of the TV will be switched a utomatically and playback screen will be displayed. (P293)
•For the pictures...

305
11. Connecting to other equipment
∫Functions that cannot be used during 3D recording
When recording with the 3D interchangeable lens (H-FT012: optio nal), the following 
feature will be disabled:
(Recording functions)
•
[Glistening Water]/[Glittering Illuminations]/[Handheld Night S hot]/[Panorama Shot] (Scene 
Guide Mode)
•[Rough Monochrome]/[Impressive Art]/[High Dynamic]/[Toy Effect] /[Toy Pop]/[Star Filter]/[One 
Point Color]/[Sunshine] (Creative Control Mode)
•Defocus control function
¢ 1 The...

306
12. Others
Optional accessories
•Some optional accessories may not be available in some countrie s.
After attaching the flash (DMW-FL200L, DMW-FL360L, 
DMW-FL580L: optional), the effective range will be increased when 
compared to the camera’s built-in flash.
Preparations:
•
Turn off the camera and close the built-in flash.
•To change the settings for external flashes on the camera, refe r to P156 .•Refer to  P161 about the settings for the wireless flash.
External Flash (optional)
Removing the Hot...

307
12. Others
•When an external flash is attached, the following functions are available in addition to the 
functions available with the built-in flash.
–Burst recording (when a setting other than [SH] is selected for  [Burst Rate])–Aperture Bracket
–Focus Bracket•You can set the aperture value, the shutter speed and the ISO s ensitivity on the camera even 
when attaching the external flash.
•If you record at close range with a wide angle, light from the  flash may be blocked by the lens, 
darkening...

12. Others
308
2Select the menu. (P51)
•
The menu items are displayed only when the stereo shotgun micro phone is connected.
3(When [MANUAL] is selected)
Press 2/1  to select a range, and press [MENU/SET].
∫ Reducing the wind noise when using an external microphone
The camera will effectively reduce the wind noise when recordin g sound with an external 
microphone.
Settings: [HIGH]/[STANDARD]/[LOW]/[OFF]
•
This item is available only when using an external microphone.•Setting [Wind Cut] may alter the...

309
12. Others
Using a battery grip (DMW-BGG1: optional) improves ease of 
operation and grip when held vertically. Installing a spare battery will 
allow you to record for a longer time.
A battery grip (DMW-BGG1: optional) is supplied with a battery  pack 
(DMW-BLC12).
∫ Setting a priority for the use of spare batteries
You can set which battery should be used when the battery is in serted to both this unit and 
the battery grip.
Preparations:
•
Turn this unit off, and then remove the terminal cover....

12. Others
310
By using the AC adaptor (optional) and DC coupler (optional), you can record and play 
back without worrying about the remaining battery charge.
The optional DC coupler can only be used with the designated Panasonic AC adaptor 
(optional).
•
Always use a genuine Panasonic AC adaptor (optional).•When using an AC adaptor (optio nal), use the AC cable supplied with the AC adaptor.
•When the DC coupler is being mounted, the DC coupler cover open s, so the structure ceases 
to be dust-proof and...