Panasonic Digital Camera Dmc G85 Owners Manual

121
5. 4K Photo and Drive Settings
•The camera will perform burst recording of a 4K photo and saves it as a 4K burst file in MP4 
format.
•When [Auto Review] is enabled, the picture selection screen wil l be displayed automatically. To 
continue recording, press the shutter button halfway to display  the recording screen.
•For information on how to select and save pictures from recorded 4K burst files, refer to P125 .
•To reduce camera shake, we recommend that you use a tripod and shutter remote control...

5. 4K Photo and Drive Settings
122
∫To change the aspect ratio
Selecting [Aspect Ratio] in the [Rec] menu allows you to change  the aspect ratio for 4K 
photos.
∫ To record the subject with reduced blur
You can reduce the blur of the subject by setting a faster shutter speed.
1Set the mode dial to  [ ].
2Set the shutter speed by rotating the rear dial or the front di al.
∫ Shutter sound for 4K photo recording
•
When using [ ] ([4K Burst]) or [ ] ([4K Pre-Burst]), you can change the electronic shutter...

123
5. 4K Photo and Drive Settings
∫The camera’s setup for the 4K Photo function
The camera’s setup is automatically optimized for 4K photo reco rding.
•
The following [Rec] menu items are fixed to the settings below:
•4K burst files are recorded with the settings indicated below:
Settings in the [Motion Picture] menu are not applied to 4K bur st files.
•When recording with the 4K Photo function, the ranges for the f ollowing functions differ from 
the ones available for taking pictures:
–Shutter speed:...

5. 4K Photo and Drive Settings
124
•The following changes occur when recording 4K photos:
–The [i.Resolution] setting changes from [EXTENDED] to [LOW].–[Destination] in [Travel Date] cannot be recorded.–[Simultaneous record w/o filter] is not available.
–It is not possible to use the HDMI output.•When recording with [ ] ([4K Pre-Burst]), [Step Zoom] in [Power Zoom Lens] is disabled.•Scene Detection in Intelligent Auto Mode works the same way as when recording motion 
pictures.
•When the drive mode is set...

125
5. 4K Photo and Drive Settings
Selecting pictures from 4K burst file and saving
This section describes how to select pictures from a 4K burst file and save them.
For information on how to record 4K burst files, refer to  P118.
1Select an image with the [ ] icon on the playback screen, and 
press  3.
•
You can also perform the same operation by touching the icon [ ].•If the image was recorded with [ ] ([4K Pre-Burst]), proceed to  step 3.
2Drag the slide bar to make a rough selection of 
scenes.
•
For...

5. 4K Photo and Drive Settings
126

•
During marker operation, you can skip to the markers that you added or the beginning or end of 
the 4K burst file. Press [Fn2] again to return to the original  operation.
Button 
operationTouch 
operationDescription of operation
2 /1Dragging Selects a frame you want to save as a picture•You can select a frame from 60 frames (continuous burst 
time of approximately 2 seconds).
Select  /
>
[MENU/SET]/ Displays the preceding or following 45 frames in slide...

127
5. 4K Photo and Drive Settings

•
Touch the screen twice to enlarge the display. To return to the original display, touch the 
enlarged screen twice.
•To select and save pictures from 4K burst files on a PC, use th e software 
“ PHOTOfunSTUDIO ”.  (P295)
Please note that it is not possible to edit a 4K burst file as  a motion picture.
Button 
operationTouch 
operationDescription of operation
3/ Continuous playback/Pause (during continuous playback)
4/ Continuous rewind/Pause (during continuous...

5. 4K Photo and Drive Settings
128
∫Selecting and saving pictures on the TV screen
•Set [HDMI Mode (Play)] (P223)  to [AUTO] or [4K].
When connecting to a TV that does not support 4K motion picture , select [AUTO].
•Set [VIERA Link] in [TV Connection] to [OFF].•If you display 4K burst files on a TV connected to the camera, they will be displayed only on the 
4K burst playback screen.
•Even if you insert the SD card to a 4K-compatible TV with an SD  card slot, you cannot play 
back 4K burst files recorded...

129
5. 4K Photo and Drive Settings
Controlling Focus After Recording 
(Post Focus/Focus Stacking)
Applicable modes: 
The camera can perform Burst recording in the same picture quality as 4K photo recording 
while automatically shifting the focus to different areas. After the recording, you can select 
the desired area on the screen and save a picture in which the  selected area is in focus.
You can also merge multiple pictures with different focus areas  to widen the focus range. 
(Focus Stacking)
This...

5. 4K Photo and Drive Settings
130
1Set the drive mode dial to [ ] .
2Decide on the composition, and press the shutter 
button halfway.
•
Auto Focus will detect focus areas on the screen. 
(Excluding the edges of the screen)
•If no areas on the screen can be brought into focus, the 
focus display (A
) will flash. Recording is not possible in 
this case.
3Press the shutter button fully to start recording.
•The focus point changes automatically while recording. 
When the icon ( B
) disappears, recording...