Panasonic Dbs 824 Instructions Manual

Contents
FCC Warnwb.......................................................................................................................ii
Battery Recyclmg Statement...............................................................................................ii
About This Manual
Purpose............................................................................................................................X
Related...

ContentsCPC and MFRU Options
3-7
Lnstailation3-8
BatteryBackup39
Guidelines3-9
Installation3-10
System
Initialization3-11
Chapter 4. Trunks and Lines
Trunks4-3
Trunk Connectors4-3
Trunk Connector Pinouts4-4
Loop-Start Trunks4-5
Guidelines4-5
Installation4-5
Lines4-5
Extension Connectors4-5
Extension Connector Pinouts4-6
Digital Extensions
4-8
DSSi724-8
Guidelines4-8
Installation4-8
EM/24
4-10
Guidelines4-10
Installation
4-10
Analog Extensions4-11
Guidelines4-11
Installation4-11
Chapter 5. Telephones and...

Off-Premises Adaptor (OPX)
Guidelines
Installation
Installing an OPX Station Without Going Through a Central Office
Installing an OPX Station Through a Central Office
External Paging
Guidelines
Non-Zoned Page Installation (CPC-M Only)
Zone Paging Installation
External Ringer (UNA Device)
Guidelines
IInstallation of External Ringer Amplifier (CPC-S)
Installation of External Ringing Device (CPC-M Only)
Installation of External Ringer Amplifier (CPC-M)
Power Failure Transfer
Guidelines
Installation
Voice...

Figure 2- 1The DBS 824 cabinet2-3
Figure 2-2Trunk, line, and peripheral connections2-4
Figure 2-3Slot labels for printed circuit packages
2-6
Figure 3-1
Figure 3-2
Figure 3-3
Figure 3-4
Figure 3-5
Figure 3-6
Figure 3-7
Figure 3-8Cover removal
3-3
Cabinet wall-mounting3-4
Cabinet ground screw3-5
CPC strap 533-7
MFRU circuit card attachment to CPC3-7
Printed circuit card installation3-8
Battery location3-10
CPC memory clear switch
3-11
Figure 
4- 1
Figure 4-2
Figure 4-3
Figure 4-4
Figure 4-5
Figure 4-6...

Figure 5-22 Voice Announce Unit (VAU) installation
5-27
Figure 5-23 Cable punch-out plate, Door Box Adaptor
5-28
Figure 5-24 Installation of the door box door opener
5-29
Figure 5-25 Connections to the Door Box Adaptor
5-30issued 
3/l 195
DBS 824-l O-300’ vii 

Table 6- 16DTMF frequencies6-13 Table 1 1
Table 1-2
Table 2- 1
Table 2-2
Table 4- 1
Table 4-2
Table 4-3
Figure 5- 1
Table 5-2
Table 5-3
Table 5-4
Table 5-5
Table 5-6
Table 5-7
Table 5-8
Table 5-9
Figure 6- 1
Table 6-2
Table 6-3
Table 6-4
Table 6-5
Table 6-6
Table 6-7
Table 6-8
Table 6-9
Table 6-10
Table 6- 11
Table 6-12
Table 6- 13
Table 
6- 14
Table 
6- 15
List of Tables
DBS 824 model number
FCC information
Printed circuit card descriptions and maximums
Major CPC-S and CPC-M feature differences
Total...

About This ManualPurpose
This manual provides installation instructions for the Digital Business System
824 
(DBS 824) The following table summarizes the purpose of each chapter
Chapter
NoTitle
IRequirements
2System Overview
Cabinet
3Installation
4Trunks and Lines
Peripheral
5Equipment
6Specifications
Related Documents
Purpose
Includes DBS 824 model number and FCC information that
may be required during installation In addition
environmental requirements are included to ensure proper
operation
Provides...

Chapter l= Requirements
This chapter includes the DBS 824 model number and FCC information that
may be required during installation In addition, environmental requirements
are included to ensure proper operation
Issued 3/l /95DBS 824-l O-300l-l 

. ..- _ _--.- -...-. -- . . . . -.,..-.._..Model Numbers and FCC Information
Table 1 I DBS 824 model number
DBS 8241 VB-42050I
Table 2FCC information
ItemSpecification
Type of ServiceThe DBS 824 is designed for use with standard telephone
lines Direct connection to party lines or coin-operated
phones is prohibited
FCC Registration Number(Not available at time of printing, see KSU label)
Ringer Equivalence
05B
Network address signaling codeE
Service Order Code9OF
Facility Interface Code
02LS2
Required...

RequirementsModel Numbers and FCC InformationCompatibility of the Telephone Network and Terminal Equipment
The Telephone Company sham make changes in its communication facilities
equipment, operations or procedures, where such action is reasonably
required in the operation of its business and is not inconsistent with the 
rules
and regulations in F C C Part 68 If such changes can be reasonably expected
to render any customer Terminal Equipment incompatible with Telephone
Company communications...