Panasonic Cordless Telephone VB 44240A User Guide

900 MHz Cordless Telephone User Guide 1
Understanding Your Telephone
The Panasonic 900 MHz VB-44240A Business 
Phone is a digital cordless telephone that allows you 
to stay connected to your Panasonic PBX - even 
when you are away from the desk. This phone 
includes:
 Digital Spread Spectrum
 Range of one mile (approximate)
 2-line LCD display with 16 digits per line
 Any-key answer
 Vibrator alert
 10 channels, selectable with the handset
 6 Function keys (F1 - F4 backlighted)
 6 Hours of talk...

Understanding Your Telephone
2
Handset features
Handset Features
Number Feature
1 Ringer ON/OFF switch
2 Message Display
3FF-6 (programmable) 
 Default: PROGRAM key
4 TALK key
16
12
412
15 14 10
17
3
5
67
9
11
13
8
900 MHz UG.book  Page 2  Wednesday, June 13, 2001  12:42 PM 

Understanding Your Telephone
900 MHz Cordless Telephone User Guide 35 Numeric Keypad
6 FF-2 (programmable)
7 FF-1 (programmable)
8 Microphone
9 Headset Jack
10FF-5 (programmable) 
 Default: AUTO key
11 H O L D  k e y
12 REDIAL key
13 CHANNEL key
14 FF-3 (programmable)
15 FF-4 (programmable)
16 Volume (R/VOL) key
17 Mute (MUTE) key
Number Feature
900 MHz UG.book  Page 3  Wednesday, June 13, 2001  12:42 PM 

Understanding Your Telephone
4
HANDSET OVERVIEW
The 900 MHz handset has a two-line LCD display.  
Each line displays up to 16 alphanumeric characters. 
The  display can also show up to four icons: 
(Talk, Ringer Off, 
Battery Low, and 
Message)
Handset Modes
Your handset operates primarily in these modes: 
Standby, Talk, or Programming. 
When you place a call, receive a call, or when you 
are in a converstation, the handset is in Ta l k
 mode 
and the  Talk icon   is displayed. The Talk 
icon blinks when...

Understanding Your Telephone
900 MHz Cordless Telephone User Guide 5
hold. If the holding call is diconnected, the LCD goes 
blank.
For information about programming mode, see 
Programming Your Handset on page 31
.
Ringer Off Indication
The Ringer Off  icon  appears if the ringer is 
turned off with the R/VOL switch.
Low Battery Warnings
 Standby mode: Battery Low 
icon appears. A battery low alert tone 
sounds once every 15 seconds for three 
minutes.
 Talk mode: The Battery Low icon  
appears, and...

Understanding Your Telephone
6
BASE STATION FEATURES
Number Feature
1 CORDLESS Button
2 CORDLESS LED
3STATUS LED
4 DESK LED
5 DESK Button
1
2
345
900 MHz UG.book  Page 6  Wednesday, June 13, 2001  12:42 PM 

Understanding Your Telephone
900 MHz Cordless Telephone User Guide 7
OPTIONAL HEADSET (VB-44249HS)
The optional Headset provides a “Hands-Free” 
Option for the 900 MHz phone. With the Headset 
installed, you can use the Belt Clip to carry the 
handset, and conduct a conversation using the Head 
Set.
To install the optional Headset, open the cover over 
the Headset Jack and plug the Headset in.
No other settings are needed.
Operation of the 900 MHz phone using the Headset 
is exactly the same as using the...

Understanding Your Telephone
8
CHARGING UNIT (EXP9785)
The unique design of your 900 MHz phone allows 
you to place the handset in the charging unit with or 
without the Belt Clip attached.
 The Battery Packs can be recharged either in or out 
of the handset.
900 MHz UG.book  Page 8  Wednesday, June 13, 2001  12:42 PM 

900 MHz Cordless Telephone User Guide 9
Installing the 900 MHz Cordless 
Telephone
The Panasonic 900 MHz Cordless phone is installed 
with your existing key telephone and DBS series 
PBX as shown in the following illustration:
1. SELECTING THE INSTALLATION LOCATION
The base station can be placed on a desk or tabletop 
near a standard 120V AC outlet and telephone line 
jack. The base station can also be mounted on a 
standard AT&T or GTE wall plate, or directly on a 
wall, using the Wall Mount Adapter....

Installing the 900 MHz Cordless Telephone
10
2. CONNECTING THE TELEPHONE CORDS
The base station for your 900 MHz phone must be 
connected to the Panasonic PBX. You can also 
connect a Panasonic key phone to the base station.
Caution: 
Never install telephone wiring during a lightning 
storm.
Never touch uninsulated telephone wires or 
terminals unless the telephone line has been 
disconnected at the network interface.
Connecting the Base Station to the PBX and 
Key Telephone
Key 
Telephone
LINE 
OUTLINE...