Panasonic Compact Stereo System Sc-hc37 Owners Manual

							11
RQT9633
ENGLISH
Sound adjustment
The following sound effects can be added to the 
audio output.
1Press [SOUND] repeatedly to select the effect 
and then press [OK].
2Press [3,4] to select the setting and then 
press [OK].
*1: This function can also be selected with the [D.BASS] 
button on the unit.
≥You may experience a reduction in sound quality when 
these effects are used with some sources. If this occurs, 
turn the sound effects off.
Clock and Timer
This is a 12-hour clock.
1Press [SETUP] repeatedly to select “CLOCK” 
and then press [OK].
2Press [3,4] to set the time and then press 
[OK].
	≥To display the clock, press [SETUP] repeatedly to select 
“CLOCK” and then press [OK] once. The time is 
displayed for 10 seconds.
(During standby, press [iPod MENU, DISPLAY] once.)
≥The clock is reset when there is a power failure or when 
the AC power supply cord is removed.
≥Reset the clock regularly to maintain accuracy.
You can set the timer so this unit turns on at a 
certain time every day.
Preparation
Set the clock (>left).
∫Setting the timer
1Press [SETUP] repeatedly to select 
“TIMER ADJ” and then press [OK].
2Press [3,4] to set the starting time 
(“ON TIME”) and then press [OK].
3Press [3,4] to set the finishing time 
(“OFF TIME”) and then press [OK].
	≥To display the timer settings, press [SETUP] repeatedly to 
select “TIMER ADJ” and then press [OK] once.
(During standby, press [iPod MENU, DISPLAY] twice.)
≥The music source and volume will also be displayed if the 
timer is turned on. (>below)
∫Turn the timer on
1Select the music source*2 and set the desired 
volume.
2Press [SETUP] repeatedly to select 
“TIMER SET” and then press [OK].
3Press [3,4] to select “SET” and then press 
[OK].
≥“F” is displayed.
4Press [Í] to turn the unit off.
	*2: “CD”, “IPOD” and “FM” can be set as the music source.
≥This unit can be used as normal after the timer is set, 
however:
≥Turn the unit to standby mode before the timer start time.
≥Even if the audio source or the volume is changed, the 
timer will still use the audio source and volume that was 
set when the timer was turned on.
≥To turn the timer off, select “OFF” in step 3.
≥The unit will turn on at the preset time, with the volume 
increasing gradually to the preset level.
The sleep timer can turn the unit off after a set time.
1Press [SETUP] repeatedly to select “SLEEP” 
and then press [OK].
2Press [3,4] to set the time (in minutes) and 
then press [OK].
“SLEEP 30” ,. “SLEEP 60” ,. “SLEEP 90” ,. “SLEEP 120”^----------------------. OFF (Cancel) (----------------------J
≥The remaining time is indicated on the unit’s display except 
when other operations are performed.
≥The play timer and sleep timer can be used together. The 
sleep timer always has priority.
Direct-Vocal 
Surround
(D.SURROUND)
“LEVEL 1”, “LEVEL 2” or 
“OFF”.
≥The factory preset is “OFF”.
Preset EQ
(PRESET EQ)“HEAVY” (heavy), “SOFT” 
(soft), “CLEAR” (clear), 
“VOCAL” (vocal) or “FLAT” 
(flat/off).
≥The factory preset is “HEAVY”.
Bass (BASS) or 
Treble (TREBLE)Adjust the level (j4 to i4).
Dynamic Bass*1
(D.BASS)“ON D.BASS” or
“OFF D.BASS”.
≥The factory preset is 
“ON D.BASS”.
Setting the clock
Play timer
Sleep timer
SC-HC37~RQT9633.book  11 ページ  ２０１２年２月２８日　火曜日　午後３時４３分 
						

							12
RQT9633
Others
As a factory preset, this unit will always turn off 
automatically if there is no sound output and no 
operation for 30 minutes.
To cancel this function
1Press [SETUP] repeatedly to select 
“AUTO OFF” and then press [OK].
2Press [3,4] to select “OFF” and then press 
[OK].
	≥To turn automatic standby on, select “ON” in step 2.
≥This setting cannot be selected when “FM” is the source.
The brightness of this unit’s display can be 
changed.
1Press [SETUP] repeatedly to select “DIMMER” 
and then press [OK].
2Press [3,4] to select “ON” and then press 
[OK].
	To cancel the dimmer, select “OFF” in step 2.
When other Panasonic equipment responds to the 
supplied remote control, change the remote control 
code.
1Press [CD] to select “CD”.
2Press and hold [CD] on the main unit and [3] 
on the remote control until the main unit’s 
display shows “REMOTE 2”.
3Press and hold [OK] and [3] on the remote 
control for at least 4 seconds.
	To change the mode back to “REMOTE 1”, repeat the 
steps above by replacing [3] with [4].
Troubleshooting
Before requesting service, make the following 
checks. If you are in doubt about some of the check 
points, or if the solutions indicated in the following 
guide do not solve the problem, refer to “Customer 
Services Directory (United States and Puerto Rico)” 
on page 19.
Humming heard during play.
≥An AC power supply cord or fluorescent light is near the 
cords. Keep other appliances and cords away from this 
unit’s cables.
Incorrect display or play will not start.
≥Make sure that the disc is compatible with this unit. (>4)
≥There is moisture on the lens. Wait for about an hour 
and then try again.
A beat sound or noise is heard while receiving 
radio broadcast.
≥Confirm the FM antenna is properly connected. (>8)
≥Adjust the position of the antenna.
≥Try to keep a certain amount of distance between the 
antenna and AC power supply cord.
≥Try to use outdoor antenna if there are buildings or 
mountains nearby.
≥Switch the television or other audio player off or 
separate it from the unit.
≥Keep this unit away from mobile phones if the 
interference is apparent.
Automatic standby
Display brightness
Changing the main unit and 
remote control code
To return all settings to the factory preset
When the following situations occur, reset the 
memory:
≥There is no response when buttons are pressed.
≥You want to clear and reset the memory contents.
1Disconnect the AC power supply cord. (Wait 
for at least 3 minutes before proceeding to 
step 2.)
2While pressing and holding down [Í/I] on the 
main unit, reconnect the AC power supply 
cord.
≥“--------” appears on the display.
3Release [Í/I].
	All the settings are returned to the factory preset. You will 
need to reset the memory items.
Common problems
Disc operations
Radio
SC-HC37~RQT9633.book  12 ページ  ２０１２年２月２８日　火曜日　午後３時４３分 
						

							13
RQT9633
ENGLISH
Stations cannot be selected.
Change the FM frequency step.
1Press [RADIO] to select “FM”.
2Press and hold [RADIO] on the main unit.
After a few seconds the display changes to show the 
current lowest frequency. Continue to hold the button 
down. The lowest frequency changes and the step is 
changed.
Cannot charge or operate.
≥Check that the iPod/iPhone is connected firmly. (>8)
≥The battery of the iPod/iPhone is depleted. Charge the 
iPod/iPhone, and then operate again.
≥When unexpected operation occurs while using the 
iPod/iPhone, connect the iPod/iPhone again or try to 
restart the iPod/iPhone.
The remote control doesnt work properly.
≥The remote control and this unit are using a different code. 
(>right, “REMOTE”)
The following messages or service numbers 
may appear on the units display.
“--:--”
≥You plugged the AC power supply cord in for the first 
time or there was a power failure recently. Set the time 
(>11 ) .
“ADJUST CLOCK”
≥Clock is not set. Adjust the clock accordingly.
“ADJUST TIMER”
≥Play timer is not set. Adjust the play timer accordingly.
“AUTO OFF”
≥The unit has been left unused for about 30 minutes and 
will shut down in a minute. Press any button to cancel it.
“CANNOT SET”
≥Select an audio source other than “VTUNER”.
“CHECKING CONNECTION”
≥The unit is checking the connected iPod/iPhone. If this 
display keeps appearing, make sure that iPod/iPhone is 
inserted correctly and try again (>8).
“DIMMER”
≥Appears 10 seconds after the volume is turned to “0”.
“ERROR”
≥Incorrect operation is performed. Read the instructions 
and try again.
“F61”
≥There is a power supply problem. Consult the dealer.
“ILLEGAL OPEN”
≥Sliding door is not in correct position. Turn the unit off 
and on again. If this display appears again, consult the 
dealer.
“IPOD OVER CURRENT ERROR”
≥The iPod/iPhone is drawing too much power. Remove 
the iPod/iPhone and turn the unit off and on again.
“NODEVICE”
≥The iPod/iPhone device is not inserted correctly. Read 
the instructions and try again (>8).
“NO DISC”
≥Insert the disc to be played (>8).
“NO PLAY”
≥A CD that is not in CD-DA format is inserted. It cannot be 
played.
“NOT SUPPORTED”
≥You have inserted an iPod/iPhone that cannot be played 
(>4). Insert correctly and try again if iPod/iPhone is 
compatible.
≥If the iPod/iPhone is compatible, turn it on before 
inserting it to this unit.
“READING”
≥The unit is checking the CD information. After this 
display has disappeared, start operating.
“START ERROR”
≥Check the iPhone/iPod touch. 
Visit the below website for more information: 
http://radio.vtuner.com/panasonic/en/
“REMOTE” (“  ” stands for a number.)
≥The remote control and this unit are using different 
codes. Change the code on the remote control.
– When “REMOTE 1” is displayed, press and hold [OK] 
and [4] for more than 4 seconds.
– When “REMOTE 2” is displayed, press and hold [OK] 
and [3] for more than 4 seconds.
iPod/iPhone operations
Remote control
Messages
SC-HC37~RQT9633.book  13 ページ  ２０１２年２月２８日　火曜日　午後３時４３分 
						

							14
RQT9633
Specifications
∫GENERAL
∫AMPLIFIER SECTION
∫TUNER SECTION
∫DISC SECTION
∫SPEAKER SYSTEM SECTION
∫TERMINAL SECTION
	≥Specifications are subject to change without notice.
Mass and dimensions are approximate.
≥Total harmonic distortion is measured by a digital 
spectrum analyzer.
Power consumption23 W
Power consumption in standby mode
Approx. 0.1 W
Power supplyAC 120 V, 60 Hz
Dimensions (WkHkD)
480 mmk197 mmk84 mm (19qk7
3/4qk31/2q)
(Depth without stand: 75 mm (3q))
Mass (Weight)
Approx. 2.5 kg(5.5 lbs)
Operating temperature range
0oCtor40oC(r32
oF to r104oF)
Operating humidity range
35 % to 80 % RH (no condensation)
Output power:
RMS Output Power Stereo mode
Front Ch (both ch driven)
20 W per channel (6≠), 1 kHz, 10 % THD
Total RMS Stereo mode power
40 W
FTC Output Power Stereo mode
Front Ch (both ch driven)
15 W per channel (6≠),
20 Hz to 20 kHz, 1 % THD
Total FTC Stereo mode power
30 W
Preset MemoryFM 30 stations
Frequency Modulation (FM)
Frequency range
87.9 MHz to 107.9 MHz (200 kHz step)
87.5 MHz to 108.0 MHz (100 kHz step)
Antenna terminals
75≠(unbalanced)
Disc played [8 cm (3q) or 12 cm (5q)]
CD, CD-R/RW (CD-DA)
Pick up
Wavelength 790 nm (CD)
Laser power
CLASSI
Audio output (Disc)
Number of channels2 ch (FL, FR)
Ty p e
1 way, 1 speaker system (Passive Radiator)
Speaker unit(s)
Full range
6.5 cm (2
1/2q) Cone typek1 per channel
Passive Radiator
8cm(3
1/8q)k2 per channel
Impedance6≠
iPod Connector
DCOUT 5V 1.0A MAX
Phone jack
Te r m i n a l
Stere o, ‰3.5 mm (
1/8q) jack
SC-HC37~RQT9633.book  14 ページ  ２０１２年２月２８日　火曜日　午後３時４３分 
						

							15
RQT9633
ENGLISH
Unit and media care
Pull out the AC power plug from the outlet before 
maintenance.
∫Clean this unit with a soft, dry cloth
≥When dirt is heavy, wring a cloth moistened in water 
tightly to wipe the dirt, and then wipe it with a dry cloth.
≥When cleaning the speaker covers, use a fine cloth.
Do not use tissues or other materials (towels, etc.) that 
can fall apart. Small grains may get stuck inside the 
speaker cover.
≥Never use alcohol, paint thinner or benzine to clean this 
unit.
≥Before using chemically treated cloth, carefully read the 
instructions that came with the cloth.
∫Maintenance of the lens
∫Clean discs
Wipe with a damp cloth and then wipe dry.
∫Disc handling precautions
≥Handle discs by the edges to avoid inadvertent 
scratches or fingerprints on the disc.
≥Do not attach labels or stickers to discs.
≥Do not use record cleaning sprays, benzine, thinner, 
static electricity prevention liquids or any other solvent.
≥Do not use the following discs:
– Discs with exposed adhesive from removed stickers or 
labels (rented discs etc.).
– Discs that are badly warped or cracked.
– Irregularly shaped discs, such as heart shapes.
∫To dispose or transfer this unit
The unit may keep the user settings information in 
the unit. If you discard this unit either by disposal or 
transfer, then follow the procedure to return all the 
settings to the factory presets to delete the user 
settings. (>12, “To return all settings to the factory 
preset”)
Licenses
≥Clean the lens regularly to prevent malfunctions. Use 
a blower to remove dust and a cotton swab if it is 
extremely dirty.
≥You cannot use a CD type lens cleaner.
≥Do not leave the sliding door open for prolonged 
periods of time. This will cause the lens to get dirty.
≥Be careful not to touch the lens with your fingers.
DO DO NOT
Lens
“Made for iPod”, and “Made for iPhone” mean that an 
electronic accessory has been designed to connect 
specifically to iPod, or iPhone, respectively, and has 
been certified by the developer to meet Apple 
performance standards.
Apple is not responsible for the operation of this device 
or its compliance with safety and regulatory standards.
Please note that the use of this accessory with iPod, or 
iPhone may affect wireless performance.
iPhone, iPod, iPod classic, iPod nano, and iPod touch 
are trademarks of Apple Inc., registered in the U.S. and 
other countries.
Listening Caution
Selecting fine audio equipment such as the unit you’ve just 
purchased is only the start of your musical enjoyment. Now 
it’s time to consider how you can maximize the fun and 
excitement your equipment offers. This manufacturer and 
the Electronic Industries Association’s Consumer 
Electronics Group want you to get the most out of your 
equipment by playing it at a safe level. One that lets the 
sound come through loud and clear without annoying 
blaring or distortion—and, most importantly, without 
affecting your sensitive hearing.
We recommend that you avoid prolonged exposure to 
excessive noise.
Sound can be deceiving. Over time your hearing “comfort 
level” adapts to higher volumes of sound. So what sounds 
“normal” can actually be loud and harmful to your hearing.
Guard against this by setting your equipment at a safe level 
BEFORE your hearing adapts.
To establish a safe level:
≥Start your volume control at a low setting.
≥Slowly increase the sound until you can hear it 
comfortably and clearly, and without distortion.
Once you have established a comfortable sound level:
≥Leave it there.
Taking a minute to do this now will help to prevent hearing 
damage or loss in the future. After all, we want you listening 
for a lifetime.
EST. 1924
SC-HC37~RQT9633.book  15 ページ  ２０１２年２月２８日　火曜日　午後３時４３分 
						

							16
RQT9633
Conexiones
≥Consumo de energía en Standby 
(modo de espera): Aprox. 0,1 W
Inser tar o sacar los medios
Las operaciones de 
reproducción de CD, 
iPod/iPhone
Preparación≥Encienda la unidad.
≥Inserte el medio. (>arriba)
≥Presione [CD] o [iPod] para seleccionar la fuente de 
audio.
∫[iPod] Para navegar por el menú de iPod/
iPhone≥Abra Music App para usar esta función con los modelos 
iPod touch/iPhone.
–[3,4]: Para navegar entre los elementos del menú.
– [OK]: Para ir al menú siguiente.
– [iPod MENU]: Para volver al menú anterior.
	El funcionamiento puede variar entre los modelos de iPod/
iPhone.
1Presione [PLAY MENU] repetidamente para 
seleccionar “PLAYMODE”.
2Presione [3,4] para seleccionar el modo 
siguiente y presione [OK].
3Presione [1/;] para comenzar a reproducir.
Spanish Quick Reference / Referencia rápida en español
1
2
Cinta adhesiva
(no suministrado)
Antena interior 
FM
(suministrado)
Conecte el cable de 
alimentación AC después de 
que todas las demás 
conexiones estén completas.
Hacia el tomacorriente AC 
Cable de alimentación AC (suministrado)
Compatible con iPod/
iPhone 
(no suministrado)
Adaptador del puerto 
(no suministrado)
Reproducción básica([CD], [iPod])
ReproducirPresione [1/;].
DetenciónPresione [∫].
PausaPresione [1/;].
Presione nuevamente para reiniciar la 
reproducción.
SaltearPresione [:/6] o [5/9] para 
saltear una pista.
BúsquedaDurante la reproducción 
Mantenga presionado [:/6] o 
[5/9].
Vo l u m e nPresione [VOL –] o [VOL +] para 
ajustar el volumen.
MutePresione [MUTE] para silenciar el 
sonido.
Modos de reproducción ([CD])
OFF PLAYMODESeleccione para cancelar el ajuste 
del modo de reproducción.
1-TRACKSolamente se reproduce la pista 
seleccionada.
(Saltar a la pista deseada 
(Bizquierda))
RANDOMSelecciona un disco para su 
reproducción de manera aleatoria.
SC-HC37~RQT9633.book  16 ページ  ２０１２年２月２８日　火曜日　午後３時４３分 
						

							17
RQT9633
ESPAÑOL
1Presione [PLAY MENU] repetidamente para 
seleccionar “REPEAT”.
2Presione [3,4] para seleccionar “ON 
REPEAT” y presione [OK].
	≥Cuando utiliza iPod/iPhone, use el ajuste en iPod/iPhone.
≥Para detener la repetición de la reproducción, seleccione 
“OFF REPEAT” en el paso 2.
Radio
Puede predeterminar hasta 30 canales FM.
Presione [RADIO] para seleccionar “FM”.
1Presione [PLAY MENU] reiteradas veces para 
seleccionar “A.PRESET” y luego presione 
[OK].
2Presione [3,4] para seleccionar “LOWEST” y 
luego presione [OK].
1Presione [PLAY MENU] reiteradas veces para 
seleccionar “TUNEMODE” y luego presione 
[OK].
2Presione [3,4] para seleccionar “PRESET” y 
luego presione [OK].
3Presione [:/6] o [5/9] para 
seleccionar el canal.
Reloj y temporizador
Éste es un reloj de 12 horas.
1Presione [SETUP] reiteradas veces para 
seleccionar “CLOCK” y luego presione [OK].
2Presione [3,4] para seleccionar la hora y 
luego presione [OK].Puede fijar el temporizador para que esta unidad 
se encienda a una cierta hora.
Preparación
Fije el reloj (Bizquierda).
∫Ajuste del temporizador
1Presione [SETUP] reiteradas veces para 
seleccionar “TIMER ADJ” y luego presione 
[OK].
2Presione [3,4] para seleccionar la hora de 
inicio y luego presione [OK].
3Presione [3,4] para seleccionar la hora de 
finalización y luego presione [OK].
∫Encienda el temporizador
1Seleccione la fuente de música*1 y fije el 
volumen deseado.
2Presione [SETUP] reiteradas veces para 
seleccionar “TIMER SET” y luego presione 
[OK].
3Presione [3,4] para seleccionar “SET” y 
luego presione [OK].
≥Para apagar el temporizador, seleccione “OFF”.4Presione [Í] para apagar la unidad.
	*1: “CD”, “IPOD” y “FM” se pueden fijar como la fuente de 
música.
El apagado automático puede apagar la unidad 
después de una hora predefinida.
1Presione [SETUP] reiteradas veces para 
seleccionar “SLEEP” y luego presione [OK].
2Presione [3,4] para seleccionar la hora y 
luego presione [OK].
“SLEEP 30” ,. “SLEEP 60” ,. “SLEEP 90” ,. “SLEEP 120”^----------------------. OFF (Cancelar) (----------------------J
Repetir la reproducción ([CD])
Preselección automática de 
las estaciones
Escuchar una estación 
predeterminada
Ajuste del reloj
Sincronizador de 
reproducción
Apagado automático
SC-HC37~RQT9633.book  17 ページ  ２０１２年２月２８日　火曜日　午後３時４３分 
						

							18
RQT9633
SC-HC37~RQT9633.book  18 ページ  ２０１２年２月２８日　火曜日　午後３時４３分 
						

							19
RQT9633
Limited Warranty 
(ONLY FOR U.S.A. AND PUERTO RICO)
Panasonic Consumer Marketing Company of North America, 
Division of Panasonic Corporation of North America
One Panasonic Way, Secaucus, New Jersey 07094
Panasonic Home Audio Products Limited Warranty
Limited Warranty Coverage
(For USA and Puerto Rico Only)
If your product does not work properly because of a defect in materials or 
workmanship, Panasonic Consumer Marketing Company of North America 
(referred to as “the warrantor”) will, for the length of the period indicated on 
the chart below, which starts with the date of original purchase (“warranty 
period”), at its option either (a) repair your product with new or refurbished 
parts, (b) replace it with a new or a refurbished equivalent value product, or (c) 
refund your purchase price. The decision to repair, replace or refund will be 
made by the warrantor.
During the “Labor” warranty period there will be no charge for labor. During 
the “Parts” warranty period, there will be no charge for parts. This Limited 
Warranty excludes both parts and labor for non-rechargeable batteries, 
antennas, and cosmetic parts (cabinet). This warranty only applies to products 
purchased and serviced in the United States or Puerto Rico. This warranty is 
extended only to the original purchaser of a new product which was not sold 
“as is”.
Carry-In or Mail-In ServiceTo find a service center please visit http://www.panasonic.com/help or call 
1-800-211-PANA (7262).
When shipping the unit, carefully pack, include all supplied accessories listed 
in the Owner’s Manual, and send it prepaid, adequately insured and packed 
well in a carton box. When shipping Lithium Ion batteries please visit our Web 
Site at www.panasonic.com/BatteryHandling
 as Panasonic is committed to 
providing the most up to date information. Include a letter detailing the 
complaint, a return address and provide a daytime phone number where you 
can be reached. A valid registered receipt is required under the Limited 
Warranty.
IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE.
Limited Warranty Limits And ExclusionsThis warranty ONLY COVERS failures due to defects in materials or 
workmanship, and DOES NOT COVER normal wear and tear or cosmetic 
damage. The warranty ALSO DOES NOT COVER damages which occurred 
in shipment, or failures which are caused by products not supplied by the 
warrantor, or failures which result from accidents, misuse, abuse, neglect, 
mishandling, misapplication, alteration, faulty installation, 
set-up adjustments, misadjustment of consumer controls, improper 
maintenance, power line surge, lightning damage, modification, introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, 
or other business or rental use of the product, or service by anyone other than 
a Factory Service Center or other Authorized Servicer, or damage that is 
attributable to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER 
“LIMITED WARRANTY COVERAGE”.
THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR 
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS 
PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. 
(As examples, this excludes damages for lost time, travel to and from the 
servicer, loss of or damage to media or images, data or other memory or 
recorded content. The items listed are not exclusive, but for illustration only.)
ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE 
WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD 
OF THE LIMITED WARRANTY.
Some states do not allow the exclusion or limitation of incidental or 
consequential damages, or limitations on how long an implied warranty lasts, 
so the exclusions may not apply to you.
This warranty gives you specific legal rights and you may also have other 
rights which vary from state to state. If a problem with this product develops 
during or after the warranty period, you may contact your dealer or Service 
Center. If the problem is not handled to your satisfaction, then write to the 
warrantor’s Consumer Affairs Department at the addresses listed for the 
warrantor.
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED 
WARRANTY, ARE YOUR RESPONSIBILITY.
As of January 2012
Product or Part Name Parts Labor
Audio Products
(except items below)1 year 1 year
DVD Home Theater System 1 year 1 year
Home Theater Audio System 1 year 1 year
SD Memory Cards, Rechargeable Battery 
Packs (defective exchange)90 days Not
Applicable
Customer Services Directory (United States and Puerto Rico)
Obtain Product Information and Operating Assistance; locate your 
nearest Dealer or Service Center; purchase Parts and 
Accessories; or make Customer Service and Literature requests 
by visiting our Web Site at:
http://www.panasonic.com/help
or, contact us via the web at:
http://www.panasonic.com/contactinfo
You may also contact us directly at:
1-800-211-PANA (7262)
Monday-Friday 9am-9pm, 
Saturday-Sunday 10am-7pm EST
For hearing or speech impaired TTY users, TTY: 1-877-833-8855 
Accessory Purchases (United States and Puerto Rico)
Purchase Parts, Accessories and Instruction Books online for all 
Panasonic Products by visiting our Web Site at: 
http://www.pstc.panasonic.com
Or, send your request by E-mail to: 
[email protected]
You may also contact us directly at:
1-800-332-5368 (Phone)  1-800-237-9080 (Fax Only)
(Monday-Friday 9am-9pm EST)
Panasonic National Parts Center
20421 84th Ave. S., Kent, WA 98032
(We accept Visa, MasterCard, Discover Card, American Express)
For hearing or speech impaired TTY users, TTY: 1-866-605-1277 
The model number and serial number of this product can be found 
on either the back or the bottom of the unit.
Please note them in the space provided below and keep for future 
reference.
MODEL NUMBER
SC-HC37
SERIAL NUMBER 
User memo:
DATE OF PURCHASE 
DEALER NAME 
DEALER ADDRESS
TELEPHONE NUMBER
SC-HC37~RQT9633.book  19 ページ  ２０１２年２月２８日　火曜日　午後３時４３分 
						

							Panasonic Consumer Marketing 
Company of North America, 
Division of Panasonic Corporation of 
North America
One Panasonic Way, Secaucus,
New Jersey 07094
http://www.panasonic.com
C Panasonic Corporation 2011
Printed in Malaysia
RQT9633-4P
F1211KW4022
pr
SC-HC37~RQT9633.book  20 ページ  ２０１２年２月２８日　火曜日　午後３時４３分