Panasonic Compact Stereo System Sc-hc30 Operating Instructions
Here you can view all the pages of manual Panasonic Compact Stereo System Sc-hc30 Operating Instructions. The Panasonic manuals for Stereo System are available online for free. You can easily download all the documents as PDF.
Page 1
RQTX1066-2P P Operating Instructions Instrucciones de funcionamiento Compact Stereo System Sistema estéreo compacto SC-HC30Model No. / Nº de modelo As an ENERGY STAR Partner, Panasonic has determined that this product meets the ENERGY STAR guidelines for energy efficiency. Como socio de ENERGY STAR , Panasonic ha determinado que este producto cumple con las d irectrices de la ENERGY STAR para el rendimiento energético. Estimado cliente Muchas gracias por comprar este producto. Antes de...
Page 2
RQTX1066 RQTX1066 2 ENGLISH RQTX1066 RQTX1066 23 CAUTIONDanger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. CAUTION!THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER...
Page 3
RQTX1066 RQTX1066RQTX1066 RQTX1066 3 ENGLISH 23 The model number and serial number of this product can be found on either the back or the bottom of the unit. Please note them in the space provided below and keep for future reference. MODEL NUMBER ______________________________________ SERIAL NUMBER ______________________________________ SC-HC30 DATE OF PURCHASE __________________________________ DEALER NAME _______________________________________ DEALER ADDRESS...
Page 4
RQTX1066 RQTX1066 4 ENGLISH RQTX1066 RQTX1066 21 AUX Connections g Notes on speakers These speakers do not have magnetic shielding. Do not place them near televisions, personal computers or other devices easily influenced by magnetism. The speaker nets cannot be removed. • • 4 5 Tape the antenna to a wall or column, in a position with the least amount of interference. •Connect the FM indoor antenna.1 FM indoor antenna Adhesive tape Back View Exhaust holes 45 1 23 2Connect the AM loop antenna. Stand...
Page 5
RQTX1066 RQTX1066RQTX1066 RQTX1066 5 ENGLISH 45 Attaching the unit to a wall (Optional) Notes on installation g Before installation, read the “Safety precautions” and “Wall mount instructions” for correct installation. g For optimal performance and to prevent potential problems, do not install this unit: at locations other than vertical walls. near a sprinkler or a sensor. near high-voltage lines or power sources. near heating device. at locations where the unit is subject to vibration or impact. near...
Page 6
![Page 6
RQTX1066
RQTX1066
6
ENGLISH
RQTX1066
RQTX1066
3. Drive the mounting screws into the wall.
1. Detach the stand from the unit.
2. Attach the wall bracket to the back of the unit.
AUX
Secure the wall bracket with fixing screw (2 pieces). [Tightening torque: 1.2 Nm (57/64 lb-ft) to 1.5 Nm (1 7/64 lb-ft)]
Align both tabs on the wall bracket and the main unit, then slide it
in until it clicks into place.
2
1
Wall mount instructions
• Before installation, turn the unit off and disconnect the AC power...](http://img.usermanuals.tech/thumb/58/62429/w300_sc-hc30_mul_om_d-5.png "Page 6
RQTX1066
RQTX1066
6
ENGLISH
RQTX1066
RQTX1066
3. Drive the mounting screws into the wall.
1. Detach the stand from the unit.
2. Attach the wall bracket to the back of the unit.
AUX
Secure the wall bracket with fixing screw (2 pieces). [Tightening torque: 1.2 Nm (57/64 lb-ft) to 1.5 Nm (1 7/64 lb-ft)]
Align both tabs on the wall bracket and the main unit, then slide it
in until it clicks into place.
2
1
Wall mount instructions
• Before installation, turn the unit off and disconnect the AC power...")
RQTX1066 RQTX1066 6 ENGLISH RQTX1066 RQTX1066 3. Drive the mounting screws into the wall. 1. Detach the stand from the unit. 2. Attach the wall bracket to the back of the unit. AUX Secure the wall bracket with fixing screw (2 pieces). [Tightening torque: 1.2 Nm (57/64 lb-ft) to 1.5 Nm (1 7/64 lb-ft)] Align both tabs on the wall bracket and the main unit, then slide it in until it clicks into place. 2 1 Wall mount instructions • Before installation, turn the unit off and disconnect the AC power...
Page 7
RQTX1066 RQTX1066RQTX1066 RQTX1066 7 ENGLISH 5. Install the safety holder. Fix the safety holder onto the wall bracket. Drive safety holder screw to secure the safety holder onto the wall. 2.2 mm (3/32") to 2.8 mm (7/64") 4. Hang the unit on the wall. g Fall-preventive measure (Optional) Removing the unit from the wall Remove safety holder screw and the safety holder. Unmount the unit from the wall. Unscrew fixing screw (2 pieces). Hold down both the catches and then slide the...
Page 8
![Page 8
RQTX1066
RQTX1066
8
ENGLISH
RQTX1066
RQTX1066
8
Refer to the numbers in parentheses for page reference.
•
Remote control
Control guide
Main unit
Top View
Front View
Display
Approx. 30° Transmission window
30
Approx. 30°
Buttons such as function the same as the remote control. They
can be used interchangeably.
•
1
8
9
10
11
12
6
7
Standby/on switch [^],
[8, POWER] (9, 11, 14)
Press to switch the unit from on
to standby mode or vice versa.
In standby mode, the unit is still
consuming a small amount...](http://img.usermanuals.tech/thumb/58/62429/w300_sc-hc30_mul_om_d-7.png "Page 8
RQTX1066
RQTX1066
8
ENGLISH
RQTX1066
RQTX1066
8
Refer to the numbers in parentheses for page reference.
•
Remote control
Control guide
Main unit
Top View
Front View
Display
Approx. 30° Transmission window
30
Approx. 30°
Buttons such as function the same as the remote control. They
can be used interchangeably.
•
1
8
9
10
11
12
6
7
Standby/on switch [^],
[8, POWER] (9, 11, 14)
Press to switch the unit from on
to standby mode or vice versa.
In standby mode, the unit is still
consuming a small amount...")
RQTX1066 RQTX1066 8 ENGLISH RQTX1066 RQTX1066 8 Refer to the numbers in parentheses for page reference. • Remote control Control guide Main unit Top View Front View Display Approx. 30° Transmission window 30 Approx. 30° Buttons such as function the same as the remote control. They can be used interchangeably. • 1 8 9 10 11 12 6 7 Standby/on switch [^], [8, POWER] (9, 11, 14) Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount...
Page 9
![Page 9
RQTX1066
RQTX1066RQTX1066
RQTX1066
9
ENGLISH
9
Disc operations
g Inserting a disc Press [^] to turn the unit on.
Press [;, CD] to open the sliding door.Enables you to program up to 24 tracks.
Press [CD q/h] and then [g].
Press [PROGRAM].
CD: Press the numeric buttons to select the track.To program more tracks, continue by pressing the numeric
buttons.
Press [OK] or [CD q/h] to start play.
MP3: Press [e,r] to select the album. Press [y/i] once and then the numeric buttons to select...](http://img.usermanuals.tech/thumb/58/62429/w300_sc-hc30_mul_om_d-8.png "Page 9
RQTX1066
RQTX1066RQTX1066
RQTX1066
9
ENGLISH
9
Disc operations
g Inserting a disc Press [^] to turn the unit on.
Press [;, CD] to open the sliding door.Enables you to program up to 24 tracks.
Press [CD q/h] and then [g].
Press [PROGRAM].
CD: Press the numeric buttons to select the track.To program more tracks, continue by pressing the numeric
buttons.
Press [OK] or [CD q/h] to start play.
MP3: Press [e,r] to select the album. Press [y/i] once and then the numeric buttons to select...")
RQTX1066 RQTX1066RQTX1066 RQTX1066 9 ENGLISH 9 Disc operations g Inserting a disc Press [^] to turn the unit on. Press [;, CD] to open the sliding door.Enables you to program up to 24 tracks. Press [CD q/h] and then [g]. Press [PROGRAM]. CD: Press the numeric buttons to select the track.To program more tracks, continue by pressing the numeric buttons. Press [OK] or [CD q/h] to start play. MP3: Press [e,r] to select the album. Press [y/i] once and then the numeric buttons to select...
Page 10
![Page 10
RQTX1066
RQTX1066
10
ENGLISH
RQTX1066
RQTX1066
FM allocation setting
The unit may also receive FM broadcast allocated in 0.1 MHz step.
To change the step to 0.1 MHz (by main unit only)
Press and hold [FM].After a few seconds the display changes to display current minimum
frequency.
Continue to hold down [FM]. When the minimum frequency changes, release the button.
To return to the original step, repeat step and (➡ above).
After the setting is changed, any previously preset frequency will be...](http://img.usermanuals.tech/thumb/58/62429/w300_sc-hc30_mul_om_d-9.png "Page 10
RQTX1066
RQTX1066
10
ENGLISH
RQTX1066
RQTX1066
FM allocation setting
The unit may also receive FM broadcast allocated in 0.1 MHz step.
To change the step to 0.1 MHz (by main unit only)
Press and hold [FM].After a few seconds the display changes to display current minimum
frequency.
Continue to hold down [FM]. When the minimum frequency changes, release the button.
To return to the original step, repeat step and (➡ above).
After the setting is changed, any previously preset frequency will be...")
RQTX1066 RQTX1066 10 ENGLISH RQTX1066 RQTX1066 FM allocation setting The unit may also receive FM broadcast allocated in 0.1 MHz step. To change the step to 0.1 MHz (by main unit only) Press and hold [FM].After a few seconds the display changes to display current minimum frequency. Continue to hold down [FM]. When the minimum frequency changes, release the button. To return to the original step, repeat step and (➡ above). After the setting is changed, any previously preset frequency will be...