Panasonic Compact Stereo System Sc-ap01 Owners Manual

							Operations
11
RQT9655
The following operations can be performed from 
the “Sound” screen.
∫The preset equalizer
“HEAVY” (heavy), “SOFT” (soft), “CLEAR” (clear), 
“VOCAL” (vocal) or “FLAT” (flat/off).
≥The factory preset is “HEAVY”.
∫Bass and Treble (BASS, TREBLE)
Adjust the level (j4 to i4).
∫Dynamic Bass (D.BASS)
“ON” or “OFF”.
≥The factory preset is “ON”.
∫Direct-vocal surround (D.SURROUND)
“LEVEL 1”, “LEVEL 2” or “OFF”.
≥The factory preset is “OFF”.
∫Muting the sound (MUTE)
The sound is temporarily muted.
∫Adjusting the volume (VOL)
Move the volume bar to adjust the volume of this 
unit.
	≥You may experience a reduction in sound quality when 
these effects are used with some sources. If this occurs, 
turn the sound effects off.
The following operations can be performed from 
the “Controller” screen.
∫Turn this unit on or off (Í)
	≥To turn this unit on, “NET STANDBY” must be set to 
“ON”. (>below)
∫Automatic standby (AUTO OFF)
This unit can be set to turn off automatically if there 
is no sound output and no operation for 30 minutes.
≥As a factory preset, this function is turned on. To 
deactivate this function, select “OFF”.
	≥Unless automatic standby is deactivated, this function 
will work every time this unit is turned on.
≥This setting can only be performed from the remote 
control app.
∫Network standby (NET STANDBY)
This unit can turn on automatically from standby 
mode when this unit is selected as the AirPlay 
speakers.
≥As a factory preset, this function is turned off. To activate 
this function, select “ON”.
	≥The factory preset is “OFF”. If this function is set to “ON” 
the standby power consumption will increase.
≥This setting can only be performed from the remote 
control app.
Sound adjustmentOther adjustment
SC-AP01PPC~RQT9655.book  11 ページ  ２０１２年３月２日　金曜日　午後７時５７分 
						

							12
RQT9655
Others
To check the Wi-Fi® signal strength where the unit 
is located.
Preparation
≥Turn the unit on.
≥Connect this unit to the wireless network. (>6)
1If this unit is in use, stop the AirPlay 
playback to this unit.
≥Wait for at least 15 seconds before 
proceeding to step 2.
2Press and hold both [– VOLUME] and 
[VOLUME i] on this unit for more than 2 
seconds.
3The operation indicator lights and then 
blinks a set number of times.
Count the number of times the indicator 
blinks.
≥A stable connection is available when the 
operation indicator blinks 3 times.
	≥Change the position or angle of your wireless network 
router or the unit in the following cases:
– The operation indicator only blinks 2 times or 1 time.
– The sound is interrupted.
Occasionally, Panasonic may release updated 
software for this unit that may add or improve the 
way a feature operates. These updates are 
available free of charge.
Preparation
≥Turn the unit on.
≥Connect this unit to the wireless network. (>6)
jMake sure that the wireless network is 
connected to the Internet.
1Press and hold both [– VOLUME] and 
[– WPS] on this unit for more than 2 
seconds.
{.The operation indicator (>4) blinks.
{.After the update has finished, the operation 
indicator (>4) lights.
2Disconnect the AC adaptor and reconnect 
it after 3 minutes.
≥Downloading will require several minutes. It may 
take longer or may not work properly depending on 
the connection environment.
	≥If the update is unsuccessful, the operation indicator will 
blink in a specific sequence.
Wi-Fi® signal strengthSoftware update
DO NOT DISCONNECT the AC adaptor while 
this unit is updating.
≥During the update process, no other operations can be 
performed.
≥If the update is unsuccessful, the operation indicator 
will blink in a specific sequence. (>below)
No. of blinks Problems and solutions
3The software download has failed. 
Please try again later.
The server cannot be found. Make 
sure that the wireless network is 
connected to the Internet.
2This unit cannot connect to the 
network. Check the network 
connection.
1The update has failed. Turn this unit 
off and remove the AC adaptor. 
Reconnect the AC adaptor and try 
again.
SC-AP01PPC~RQT9655.book  12 ページ  ２０１２年３月２日　金曜日　午後７時５７分 
						

							Operations
Reference
13
RQT9655
Troubleshooting
Before requesting service, make the following 
checks. If you are in doubt about some of the check 
points, or if the solutions indicated in the following 
guide do not solve the problem, refer to “Customer 
Services Directory (United States and Puerto Rico)” 
on page 18 if you reside in the U.S.A. or Puerto 
Rico, or refer to “Limited Warranty (ONLY FOR 
CANADA)” on page 19 if you reside in Canada.
Do you have the latest software installed?≥Occasionally, Panasonic may release updated software 
for this unit that may add or improve the way a feature 
operates. (>12)
Humming heard during play.≥An AC power supply cord or fluorescent light is near the 
cords. Keep other appliances and cords away from this 
unit’s cables.
The power on indicator blinks red.≥The unit has been left unused for about 30 minutes and 
will shut down in a minute. Press any button to cancel it. 
(>11 )
Cannot connect to the network.≥Confirm the network connection and settings. (>6)
≥Your wireless network might be set to be invisible. In this 
case select “Manual settings” in “Method 2”. (>7)
≥This unit cannot join a wireless network using WEP 
security settings with the WPS methods (“Method 1”). 
Use “Method 2” to join the wireless network. (>7)
≥Make sure that the multicast function on the wireless 
network router is set to on (enabled).
My wireless network router is WPS PBC 
compatible, but the pairing does not work.
≥If the network is set to be invisible, the push button 
configuration does not work. In this case, either make 
the wireless network visible while you set up the network 
for this unit or use “Method 2”. (>7)
The Wi-Fi® status indicator continues to blink 
red.
≥The Wi-Fi® status indicator will blink red when this unit is 
connecting to the wireless network. Once it is connected 
to the wireless network it will light blue.
If it continues to blink red, check the wireless network 
settings. (>6)
Cannot connect to the unit.≥Make sure that this unit is on the same wireless network 
as the device you are trying to use. (>6)
≥If “NET STANDBY” is set to “OFF”, the AirPlay 
compatible device cannot be connected when this unit is 
off.
≥Set “NET STANDBY” to “OFF” (>11), turn off the Wi-Fi
® 
setting on the AirPlay compatible device, and then turn 
this unit off and on. Reconnect the compatible device to 
the Wi-Fi
® network and then select this unit as the 
AirPlay speakers again.
Playback does not start.
The sound is interrupted.
≥Simultaneous use with other 2.4 GHz devices, such as 
microwaves, cordless telephones, etc., may result in 
connection interruptions. Increase the distance between 
this unit and these devices.
≥Do not place this unit inside a metal cabinet, for it might 
block the Wi-Fi
® signal.
≥Place this unit closer to the wireless network router.
≥If several wireless devices are simultaneously using the 
same wireless network as this unit, try turning off the 
other devices or reducing their wireless network usage.
≥With some iOS and iTunes versions, it may not be 
possible to restart the AirPlay playback if the unit is 
turned off during the AirPlay playback.
In this case, select a different device from the AirPlay 
icon of the Music app or iTunes and then re-select this 
unit as the output speakers. (>9)
≥If the playback stops, check the playback status on the 
iOS device or iTunes.
≥If play does not start (even though the Wi-Fi
® status 
indicator lights blue and the AirPlay   icon is 
displayed), restart the wireless network router, turn the 
Wi-Fi
® connection on the iOS device or Mac/PC off and 
on, and then make sure that your home wireless network 
is selected.
To return all settings to the factory preset
When the following situations occur, reset the 
memory:
≥There is no response when buttons are pressed.
≥You want to clear and reset the memory contents.
1Disconnect the AC adaptor. (Wait for at least 
3 minutes before proceeding to step 2.)
2While pressing and holding down [Í/I] on the 
main unit, reconnect the AC adaptor.
≥The operation indicator (>4) blinks 4 
times.
3Release [Í/I].
	All the settings are returned to the factory preset. You will 
need to reset the memory items.
Common problems
Network
AirPlay operations
SC-AP01PPC~RQT9655.book  13 ページ  ２０１２年３月２日　金曜日　午後７時５７分 
						

							14
RQT9655
Specifications
∫GENERAL∫AMPLIFIER SECTION
∫SPEAKER SYSTEM SECTION
∫Wi-Fi / AirPlay SECTION
∫TERMINAL SECTION
	≥Specifications are subject to change without notice.
Mass and dimensions are approximate.
≥Total harmonic distortion is measured by a digital 
spectrum analyzer.
General
Main set rating
DC 12 V, 20 W
System
Power consumption
(With USB port charging)
Approx. 22 W
Power consumption in standby mode
(When “NET STANDBY” is “OFF”)
Approx. 0.15 W
Power consumption in standby mode
(When “NET STANDBY” is “ON”)
Approx. 3.7 W
AC Adaptor
Input
AC 100 V to 240 V, 50/60 Hz
Output
DC 12 V, 3 A
Dimensions (WkHkD)
430 mmk128 mmk59 mm
(16
15/16qk51/32qk25/16q)
Mass (Weight)
Approx. 1 kg(2.2 lbs)
Operating temperature range
0oCtor40oC(r32
oF to r104oF)
Operating humidity range
20 % to 80 % RH (no condensation)
Output power:
RMS Output Power Stereo mode
Front Ch (both ch driven)
5 W per channel (6≠),1kHz,10%THD
Total RMS Stereo mode power
10 W
FTC Output Power Stereo mode
Front Ch (both ch driven)
3.5 W per channel (6≠),
60 Hz to 20 kHz, 1 % THD
Total FTC Stereo mode power
7W
Ty p e
1 way, 1 speaker system (Bass Reflex)
Speaker unit(s)
Full range
4cm(1
9/16q) Cone typek2
Impedance6≠
Wi-Fi
WLAN Standards
IEEE802.11b/g
Frequency range
2.4 GHz band
Security
WEP, WPA
TM, WPA2TM
WPS version
Version 2.0 (WEP not support)
USB Port
USB port power
DC OUT 5 V, 2.1 A Max (charging only)
SC-AP01PPC~RQT9655.book  14 ページ  ２０１２年３月２日　金曜日　午後７時５７分 
						

							Reference
15
RQT9655
Conexiones
Conecte el adaptador de CA a la toma doméstica 
de CA.
Ajustes de red
Para utilizar la función AirPlay, esta unidad debe 
conectarse a la misma red inalámbrica que el 
dispositivo compatible.
	≥Al realizar los ajustes de red, ubique la unidad cerca del 
router inalámbrico.
≥El uso simultáneo de un microondas o de un teléfono 
inalámbrico u otros dispositivos de 2,4 GHz puede causar 
interrupciones en la conexión.
≥Inmediatamente después de encender esta unidad, el ajuste 
de la red puede tardar más en arrancar.
≥Esta unidad no se puede conectar a una red inalámbrica al 
utilizar ajustes de seguridad WEP con “Método 1”. Utilizar 
“Método 2” para conectarse a la red inalámbrica.
≥Para cancelar este ajuste a la mitad, pulse [Í/I] para apagar 
la unidad.
≥Para obtener información actualizada sobre compatibilidad 
de su router inalámbrico, consulte 
http://panasonic.jp/support/global/cs/
(Este sitio está solamente en inglés).
∫Uso de la configuración del botón de 
comando WPS (PBC)
1Pulse y mantenga pulsado [– WPS] en 
este aparato durante más de 2 segundos.
≥Complete el paso 2 en 2 minutos.
2Presione el botón WPS del router 
inalámbrico.
{.Cuando se establece un enlace el indicador de estado 
Wi-Fi® parpadea rápidamente.
3Cuando termina la configuración, el indicador 
de estado Wi-Fi® se ilumina de color azul.
(Continúa en la página 17, “Uso de AirPlay con los 
altavoces de esta unidad”)
	≥Para editar el nombre del sistema, es necesario utilizar 
“Método 2”.
≥El indicador de estado Wi-Fi
® se apaga si la conexión no se 
realizó dentro del límite de tiempo establecido. Pruebe de 
nuevo el ajuste. Si el indicador de estado Wi-Fi
® todavía 
parpadea de color rojo, pruebe “Método 2”.
*1: WPS significa “Wi-Fi Protected Setup”.
Spanish Quick Reference / Referencia rápida en español
Preparación
≥
Encienda la unidad.
≥Con esta unidad, existen dos métodos para 
configurar la conexión. Determine el tipo de router 
inalámbrico que está utilizando y siga el método 
que se ajuste a su dispositivo.
jConsulte las instrucciones de funcionamiento del 
router inalámbrico para obtener más detalles.
Si desconoce el tipo de router inalámbrico que está 
utilizando, utilice “
Método 2”.
DC IN 12V
Esta unidad consume poca corriente CA (>14) 
incluso cuando se encuentra apagada.
≥Cuando no se va a usar el 
producto durante un período 
largo, apague la unidad y saque 
el adaptador de CA de la toma 
doméstica de CA para ahorrar 
energía.
Adaptador de CA (incluído)
(DC IN 12 V)
Método 1
Si su router inalámbrico admite WPS*1.
El router inalámbrico 
compatible con el botón de 
comando WPS (PBC) puede 
tener esta marca.
Parpadea en 
azul
SC-AP01PPC~RQT9655.book  15 ページ  ２０１２年３月２日　金曜日　午後７時５７分 
						

							16
RQT9655
Con este método, podrá acceder a los ajustes de 
red inalámbrica de esta unidad desde el navegador 
Web de su dispositivo compatible.
≥Las imágenes y explicaciones corresponden a un iPhone.
Preparación
≥Encienda su iPhone.
1Mantenga pulsado [VOLUME i] y 
[– WPS] en este aparato durante más de 
2 segundos.
2Conecte su iPhone a la red inalámbrica 
de esta unidad llamada
“Setup _ _ _ _ _ _”*
2, 3.
3Inicie “Safari” en su iPhone e ingrese 
“http://192.168.1.12/” en el campo de 
dirección URL y visualice la página.
{.Se visualizará esta ventana de configuración de la 
unidad.
4Seleccione “Search wireless network”.
5Seleccione e ingrese los detalles.
≥Verifique el nombre de la red inalámbrica 
doméstica (Network name (SSID)) y 
contraseña para esta red. A menudo, se 
puede encontrar en el router inalámbrico 
mismo.
6Seleccione “JOIN” para aplicar los 
ajustes.
{.En la pantalla emergente, seleccione “OK” para 
continuar.
– Seleccione “CANCEL” para regresar a la ventana de 
configuración.
{.El indicador de estado Wi-Fi
® parpadea en azul.
– Ahora puede cerrar el navegador Safari.
7Cuando termina la configuración, el 
indicador de estado Wi-Fi
® se ilumina de 
color azul.
8Vuelva a conectar su iPhone a su red 
inalámbrica doméstica.
(Continúa en la página 17, “Uso de AirPlay con los 
altavoces de esta unidad”)
*1: WPS significa “Wi-Fi Protected Setup”.
*2: “ _ ” representa un dígito que es único para cada set.
*3: Asegúrese de que DHCP esté activado para el ajuste de 
red en el iPhone.
*4: Si configuró su red inalámbrica como invisible, seleccione 
“BACK” y consulte “Ajustes alternativos”. (>17)
Método 2
Si su router inalámbrico no admite WPS*1.
Parpadea de 
color morado
_ _ _ _ _ _
[1]Seleccione su nombre de red 
inalámbrica doméstica.*4
[2]Ingrese la contraseña.
[3]Seleccione “NEXT”.
Si el indicador de estado Wi-Fi
® se apaga, 
apague la unidad y vuelva a encenderla, revise la 
contraseña de la red inalámbrica y otras 
configuraciones y vuelva a comenzar desde el 
paso 1.
SC-AP01PPC~RQT9655.book  16 ページ  ２０１２年３月２日　金曜日　午後７時５７分 
						

							Reference
17
RQT9655
	≥Habilite Java y Cookies en los ajustes del navegador.
≥Para cancelar este ajuste a la mitad, pulse [Í/I] para apagar 
la unidad.
Uso de AirPlay con los 
altavoces de esta unidad
Cuando esta unidad se encuentre en la misma red 
que el dispositivo compatible, puede seleccionar 
dicha unidad como los altavoces.
1Inicie “Music” (o “iPod”) app de su 
dispositivo iOS o “iTunes” de su Mac/
PC.
≥Si se utiliza el Music app de su dispositivo iOS, 
seleccione el archivo que quiere reproducir.
2Seleccione “Panasonic AP01 _ _ _ _ _ _”*1 
desde el ícono AirPlay   en la esquina 
inferior derecha del visualizador.
{.Verifique los ajustes de volumen antes de 
comenzar la reproducción. (Cuando se use AirPlay 
por primera vez, el volumen debe reproducirse al 
máximo).
≥Si no ha cambiado el nombre, esta unidad se 
visualizará como “Panasonic AP01 _ _ _ _ _ _”.
3Inicie la reproducción.
*1: “ _ ” representa un dígito que es único para cada set.
Ajustes alternativos
En lugar de los pasos 4 y 5:
Seleccione “Manual settings”.
1 Ingrese su nombre de red inalámbrica 
doméstica dentro del campo “Network name 
(SSID)”.
2 Seleccione el método de cifrado desde la 
lista despegable “Security system”.
3 Ingrese la contraseña dentro del campo 
“Password” y luego seleccione “NEXT”.
Ajustes adicionales
Déspues del paso 5 y antes del paso 6:
Si su red inalámbrica doméstica ha sido 
configurada para utilizar específicamente 
Direcciones IP, Máscara de Subred, Acceso 
por defecto, DNS Primario, etc.
Seleccione “Advanced network settings”.
{.Introduzca las direcciones requeridas dentro de cada 
campo y seleccione “OK”.
≥Para volver a los ajustes a DHCP, seleccione “ON” de la 
lista despegable “DHCP”.
Si desea cambiar el nombre de esta unidad que 
se visualiza como altavoces AirPlay.
Seleccione “Edit STEREO SYSTEM name”.
{.Solo se pueden usar caracteres ASCII.
{.Ingrese un nuevo nombre dentro del campo “STEREO 
SYSTEM name” y seleccione “OK”.
Preparación
≥Conecte esta unidad a la misma red que el 
dispositivo compatible. (>15)
≥Encienda el dispositivo compatible.
Ej., iPhone iOS 5.0
Computer
Multiple Speakers...Panasonic AP01_ _ _ _ _ _
Ej., iTunes 10.5
SC-AP01PPC~RQT9655.book  17 ページ  ２０１２年３月２日　金曜日　午後７時５７分 
						

							18
RQT9655
Limited Warranty 
(ONLY FOR U.S.A. AND PUERTO RICO)
Panasonic Consumer Marketing Company of North America, 
Division of Panasonic Corporation of North America
One Panasonic Way, Secaucus, New Jersey 07094
Panasonic Home Audio Products Limited Warranty
Limited Warranty Coverage
(For USA and Puerto Rico Only)
If your product does not work properly because of a defect in materials or 
workmanship, Panasonic Consumer Marketing Company of North America 
(referred to as “the warrantor”) will, for the length of the period indicated on 
the chart below, which starts with the date of original purchase (“warranty 
period”), at its option either (a) repair your product with new or refurbished 
parts, (b) replace it with a new or a refurbished equivalent value product, or (c) 
refund your purchase price. The decision to repair, replace or refund will be 
made by the warrantor.
During the “Labor” warranty period there will be no charge for labor. During 
the “Parts” warranty period, there will be no charge for parts. This Limited 
Warranty excludes both parts and labor for non-rechargeable batteries, 
antennas, and cosmetic parts (cabinet). This warranty only applies to products 
purchased and serviced in the United States or Puerto Rico. This warranty is 
extended only to the original purchaser of a new product which was not sold 
“as is”.
Carry-In or Mail-In ServiceTo find a service center please visit http://www.panasonic.com/help or call 
1-800-211-PANA (7262).
When shipping the unit, carefully pack, include all supplied accessories listed 
in the Owner’s Manual, and send it prepaid, adequately insured and packed 
well in a carton box. When shipping Lithium Ion batteries please visit our Web 
Site at www.panasonic.com/BatteryHandling
 as Panasonic is committed to 
providing the most up to date information. Include a letter detailing the 
complaint, a return address and provide a daytime phone number where you 
can be reached. A valid registered receipt is required under the Limited 
Warranty.
IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE.
Limited Warranty Limits And ExclusionsThis warranty ONLY COVERS failures due to defects in materials or 
workmanship, and DOES NOT COVER normal wear and tear or cosmetic 
damage. The warranty ALSO DOES NOT COVER damages which occurred 
in shipment, or failures which are caused by products not supplied by the 
warrantor, or failures which result from accidents, misuse, abuse, neglect, 
mishandling, misapplication, alteration, faulty installation, 
set-up adjustments, misadjustment of consumer controls, improper 
maintenance, power line surge, lightning damage, modification, introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, 
or other business or rental use of the product, or service by anyone other than 
a Factory Service Center or other Authorized Servicer, or damage that is 
attributable to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER 
“LIMITED WARRANTY COVERAGE”.
THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR 
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS 
PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. 
(As examples, this excludes damages for lost time, travel to and from the 
servicer, loss of or damage to media or images, data or other memory or 
recorded content. The items listed are not exclusive, but for illustration only.)
ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE 
WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD 
OF THE LIMITED WARRANTY.
Some states do not allow the exclusion or limitation of incidental or 
consequential damages, or limitations on how long an implied warranty lasts, 
so the exclusions may not apply to you.
This warranty gives you specific legal rights and you may also have other 
rights which vary from state to state. If a problem with this product develops 
during or after the warranty period, you may contact your dealer or Service 
Center. If the problem is not handled to your satisfaction, then write to the 
warrantor’s Consumer Affairs Department at the addresses listed for the 
warrantor.
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED 
WARRANTY, ARE YOUR RESPONSIBILITY.
As of January 2012
Product or Part Name Parts Labor
Audio Products
(except items below)1 year 1 year
DVD Home Theater System 1 year 1 year
Home Theater Audio System 1 year 1 year
SD Memory Cards, Rechargeable Battery 
Packs (defective exchange)90 days Not
Applicable
Customer Services Directory (United States and Puerto Rico)
Obtain Product Information and Operating Assistance; locate your 
nearest Dealer or Service Center; purchase Parts and 
Accessories; or make Customer Service and Literature requests 
by visiting our Web Site at:
http://www.panasonic.com/help
or, contact us via the web at:
http://www.panasonic.com/contactinfo
You may also contact us directly at:
1-800-211-PANA (7262)
Monday-Friday 9am-9pm, 
Saturday-Sunday 10am-7pm EST
For hearing or speech impaired TTY users, TTY: 1-877-833-8855 
Accessory Purchases (United States and Puerto Rico)
Purchase Parts, Accessories and Instruction Books online for all 
Panasonic Products by visiting our Web Site at: 
http://www.pstc.panasonic.com
Or, send your request by E-mail to: 
[email protected]
You may also contact us directly at:
1-800-332-5368 (Phone)  1-800-237-9080 (Fax Only)
(Monday-Friday 9am-9pm EST)
Panasonic National Parts Center
20421 84th Ave. S., Kent, WA 98032
(We accept Visa, MasterCard, Discover Card, American Express)
For hearing or speech impaired TTY users, TTY: 1-866-605-1277 
The model number and serial number of this product can be found 
on either the back or the bottom of the unit.
Please note them in the space provided below and keep for future 
reference.
MODEL NUMBER
SC-AP01
SERIAL NUMBER 
User memo:
DATE OF PURCHASE 
DEALER NAME 
DEALER ADDRESS
TELEPHONE NUMBER
SC-AP01PPC~RQT9655.book  18 ページ  ２０１２年３月２日　金曜日　午後７時５７分 
						

							Reference
19
RQT9655
Limited Warranty (ONLY FOR CANADA)
Panasonic Canada Inc.5770 Ambler Drive, Mississauga, Ontario L4W 2T3
PANASONIC PRODUCT - LIMITED WARRANTY
EXCHANGE PROGRAM
Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship under normal use and 
for a period as stated below from the date of original purchase agrees to, at its option either (a) repair your product with 
new or refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase 
price. The decision to repair, replace or refund will be made by Panasonic Canada Inc.
This warranty is given only to the original purchaser, or the person for whom it was purchased as a gift, of a Panasonic 
brand product mentioned above sold by an authorized Panasonic dealer in Canada and purchased and used in Canada, 
which product was not sold “as is”, and which product was delivered to you in new condition in the original packaging.
IN ORDER TO BE ELIGIBLE TO RECEIVE WARRANTY SERVICE HEREUNDER, A PURCHASE RECEIPT OR 
OTHER PROOF OF DATE OF ORIGINAL PURCHASE, SHOWING AMOUNT PAID AND PLACE OF PURCHASE
 IS 
REQUIRED 
LIMITATIONS AND EXCLUSIONS
This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear 
and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures 
which are caused by products not supplied by Panasonic Canada Inc., or failures which result from accidents, misuse, 
abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer 
controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand, humidity or 
liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or service by 
anyone other than an Authorized Servicer, or damage that is attributable to acts of God.
Dry cell batteries are also excluded from coverage under this warranty.
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, 
INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN 
NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL 
DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY 
EXPRESS OR IMPLIED WARRANTY. (As examples, this warranty excludes damages for lost time, travel to and from the 
Authorized Servicer, loss of or damage to media or images, data or other memory or recorded content. This list of items is 
not exhaustive, but for illustration only.)
In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or 
the exclusion of implied warranties, so the above limitations and exclusions may not be applicable. This warranty gives 
you specific legal rights and you may have other rights which vary depending on your province or territory.
CONTACT INFORMATION
Panasonic Portable / Clock Radio (without Tape, CD, MD)
Panasonic Audio Product
Panasonic DVD Product
Accessories including rechargeable batteriesOne (1) year
One (1) year
One (1) year
Ninety (90) days
For product information and operation assistance, please contact:
Our Customer Care Centre: Telephone #:
Fax #:
Email link:1-800-561-5505
(905) 238-2360
“Support 
# contact us # email” on www.panasonic.ca
For defective product exchange within the warranty period, please contact the original dealer or our Customer Care 
Centre.
SC-AP01PPC~RQT9655.book  19 ページ  ２０１２年３月２日　金曜日　午後７時５７分 
						

							-If you see this symbol-
Information on Disposal in other Countries 
outside the European Union
This symbol is only valid in the 
European Union.
If you wish to discard this product, 
please contact your local 
authorities or dealer and ask for 
the correct method of disposal.
THE FOLLOWING APPLIES IN THE U.S.A. 
AND CANADA
This device complies with Part 15 of FCC Rules, RSS-
Gen and RSS-210 of IC Rules.
Operation is subject to the following two conditions: 
(1) This device may not cause interference, and 
(2) this device must accept any interference, including 
interference that may cause undesired operation of this 
device.
This transmitter must not be co-located or operated in 
conjunction with any other antenna or transmitter.
This equipment complies with FCC/IC radiation exposure 
limits set forth for an uncontrolled environment and meets 
the FCC radio frequency (RF) Exposure Guidelines in 
Supplement C to OET65 and RSS-102 of the IC radio 
frequency (RF) Exposure rules. This equipment has very 
low levels of RF energy that it deemed to comply without 
maximum permissive exposure evaluation (MPE). But it 
is desirable that it should be installed and operated 
keeping the radiator at least 20 cm (7 
7/8q) or more away 
from person’s body (excluding extremities: hands, wrists, 
feet and ankles).
THE FOLLOWING APPLIES ONLY IN THE 
U.S.A.
FCC Note:
This equipment has been tested and found to comply 
with the limits for a Class B digital device, pursuant to 
Part 15 of the FCC Rules.
These limits are designed to provide reasonable 
protection against harmful interference in a residential 
installation. This equipment generates, uses and can 
radiate radio frequency energy and, if not installed and 
used in accordance with the instructions, may cause 
harmful interference to radio communications. However, 
there is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause 
harmful interference to radio or television reception, 
which can be determined by turning the equipment off 
and on, the user is encouraged to try to correct the 
interference by one or more of the following measures:
≥Reorient or relocate the receiving antenna.
≥Increase the separation between the equipment and 
receiver.
≥Connect the equipment into an outlet on a circuit 
different from that to which the receiver is connected.
≥Consult the dealer or an experienced radio/TV 
technician for help.
Any unauthorized changes or modifications to this 
equipment would void the user’s authority to operate this 
device.
This device complies with Part 15 of the FCC Rules. 
Operation is subject to the following two conditions: 
(1) This device may not cause harmful interference, and 
(2) this device must accept any interference received, 
including interference that may cause undesired 
operation.
Responsible Party:
Panasonic Corporation of North America
One Panasonic Way
Secaucus, NJ 07094
Support Contact:
Panasonic Consumer Marketing 
Company of North America
Telephone No.: 1-800-211-PANA (7262)
Panasonic Consumer Marketing 
Company of North America, 
Division of Panasonic Corporation of 
North America
One Panasonic Way, Secaucus,
New Jersey 07094
http://www.panasonic.com
C Panasonic Corporation 2012
Printed in Malaysia
Panasonic Canada Inc.5770 Ambler Drive
Mississauga, Ontario
L4W 2T3
www.panasonic.ca
RQT9655-1P
F0212AC1032
pr
SC-AP01PPC~RQT9655.book  20 ページ  ２０１２年３月２日　金曜日　午後７時５７分