Panasonic Compact Speaker System Sc-mc07 Owners Manual

							Owner’s Manual
Compact Speaker System
Model No.
 SC-MC07
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions carefully.
Please keep this manual for future reference.Register online at 
www.panasonic.com/register
 (U.S. customers only)
If you have any questions, contact:
U.S.A. and Puerto Rico : 1-800-211-PANA (7262)PPanasonic Corporation 2012Printed in China One Panasonic Way, Secaucus, 
New Jersey 07094
http://www.panasonic.comPanasonic Consumer Marketing Company of North America, Division of Panasonic Corporation of North AmericaIMPORTANT SAFETY INSTRUCTIONSRead these operating instructions carefully before using the unit. Follow the safety instructions 
on the unit and the applicable safety instructions listed below. Keep these operating 
instructions handy for future reference.
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in accordance with the manufacturer’s 
instructions.
8 Do not install near any heat sources such as radiators, heat registers, stoves, or other 
apparatus (including amplifiers) that produce heat.
9 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug 
has two blades with one wider than the other. A grounding-type plug has two blades and 
a third grounding prong. The wide blade or the third prong are provided for your safety. If 
the provided plug does not fit into your outlet, consult an electrician for replacement of the 
obsolete outlet.
10 Protect the power cord from being walked on or pinched particularly at plugs, 
convenience receptacles, and the point where they exit from the apparatus.
11 Only use attachments/accessories specified by the manufacturer.
12 Use only with the cart, stand, tripod, bracket, or table specified by the 
manufacturer, or sold with the apparatus. When a cart is used, use 
caution when moving the cart/apparatus combination to avoid injury from 
tip-over.
13 Unplug this apparatus during lightning storms or when unused for long 
periods of time.
14 Refer all servicing to qualified service personnel. Servicing is required 
when the apparatus has been damaged in any way, such as power-supply cord or plug is 
damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus 
has been exposed to rain or moisture, does not operate normally, or has been dropped.
WARNINGTo reduce the risk of fire, electric shock or product damage,
• Do not expose this unit to rain, moisture, dripping or splashing.
• Do not place objects filled with liquids, such as vases, on this unit.
• Use only the recommended accessories.
• Do not remove covers.
• Do not repair this unit by yourself. Refer servicing to qualified service personnel.CAUTIONUnit
• Do not place sources of naked flames, such as lighted candles, on this unit.
• Product identification marking is located on the bottom of the unit.
Batteries
• Danger of explosion if battery is incorrectly replaced. Replace only with the type 
recommended by the manufacturer.
• Mishandling of batteries can cause electrolyte leakage and may cause a fire.
– Do not mix old and new batteries or different types at the same time.
– Do not heat or expose to flame.
– Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of 
time with doors and windows closed.
– Do not take apart or short circuit.
– Do not recharge alkaline or manganese batteries.
– Do not use batteries if the covering has been peeled off.
– Remove batteries if you do not intend to use this unit for a long period of time. Store 
in a cool, dark place.
• When disposing the batteries, please contact your local authorities or dealer and ask 
for the correct method of disposal.Safety precautionsFCC Note:This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in 
a residential installation. This equipment generates, uses, and can radiate radio frequency 
energy and, if not installed and used in accordance with the instructions, may cause 
harmful interference to radio communications. However, there is no guarantee that 
interference will not occur in a particular installation. If this equipment does cause harmful 
interference to radio or television reception, which can be determined by turning the 
equipment off and on, the user is encouraged to try to correct the interference by one or 
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver 
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, follow the attached installation instructions 
and use only shielded interface cables with ferrite core when connecting to computer or 
peripheral devices.
Any changes or modifications not expressly approved by the party responsible for 
compliance could void the user’s authority to operate this equipment.
Declaration of Conformity
Trade Name: Panasonic
Model No.:  SC-MC07
Responsible Party:
Panasonic Corporation of North America
One Panasonic Way, Secaucus, NJ 07094
Support Contact:
Panasonic Consumer Marketing Company of North America
1-800-211-PANA (7262)This device complies with Part 15 of the FCC Rules. Operation is subject to the following 
two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may 
cause undesired operation.
Check the supplied accessories before using this unit.
1 USB cable (RFE0242)• Product numbers provided in this Owner’s Manual correct as of May 2012. These may be 
subject to change.
• Do not use any other USB cables except the supplied one.Please connect to a PC using the USB cable (supplied) or use batteries (not 
supplied).
Connecting the USB cable• Do not use any other USB cables except the supplied one. (Operation is not guaranteed.)
• Do not connect two or more USB devices to a PC. (Operation is not guaranteed.)Inser ting the batteries
Insert so the poles (i and j) match those in this unit.• Use alkaline batteries.
• If the battery is low, the indicator will change from blue to red.
Note
• Connection to a USB port of a PC provides the unit with the power supply only; 
communication with the PC or charging of the unit does not work.
• USB is higher priority than battery, when this unit is connected to a PC and the battery is 
inserted at the same time.
By using the Bluetooth
® connection, you can listen to the sound from the 
Bluetooth
® audio device 
 with this unit wirelessly.
Preparation
Switch on the Bluetooth® feature of the device and put the device near this 
unit. Read the operating instructions of Bluetooth
® audio device for its 
operation.
Pair with another device and listen to audio
1 Press [Í/I] to turn this unit on.
• If using this unit for the first time, please go to Step 3.
2Press and hold [   ] for 2 seconds.
• The indicator will blink fast and the unit will enter pairing standby mode.
• When this unit is operated on batteries, it functions as a battery check indicator. 
(See “Control reference guide”)
3In the Bluetooth
® pairing settings of the Bluetooth
® device, select to 
pair with “SC-MC07”.
• Depending on the device, connection may take place automatically when pairing is 
selected. In this case, go to Step 5.
• If prompted for a passkey, input “0000”.
4In the Bluetooth
® connecting settings of the Bluetooth
® device, 
select to connect with “SC-MC07”.
• When the connection is made, the indicator on the unit lights up.
5Start playback on the Bluetooth
® device.
• Adjust the volume using the [- VOL +] buttons on the unit. 
When the maximum or minimum volume is reached, you will be notified by a beep 
sound.
Disconnecting
• Switch off this unit or the device.
• Stop / disable the Bluetooth
® transmission of the device.
Listening to audio from a paired device
When this unit is turned on, the indicator will blink slowly indicating that the 
unit is in connection standby mode. Please perform Steps 4 and 5.
• When the power is turned on, this unit is connected to the last-used Bluetooth
® device. At 
this point, please perform Step 5.
Note
• This unit can only connect to one device at a time.
• You can pair up to 6 devices with this unit. If a 7th device is paired, the device with the oldest 
connection history will be replaced.
• Panasonic bears no responsibility for data and/or information that can possibly be 
compromised during a wireless transmission.
This unit automatically switches off if there is no audio input and you do not 
use it for approximately 10 minutes.
AccessoriesPower supply preparation
USB cable (supplied)
LR6, AA (Alkaline)
 (not supplied)Pull the sheet to remove the batteries
Control reference guideListening to audio from a Bluetooth
® device
Auto Power OffFront
RearStatus Indicator
• Blue: Power on and Bluetooth
® mode
• Red: Low battery
Adjust the volume
Power on/off (Í/I) Start Bluetooth
® pairing modeUSB port • When you listen to the sound, face the front side of the unit.
(The speaker is built into the front side.)
VQT4L28F0512SY0
SC-MC07P.fm  1 ページ  ２０１２年５月１６日　水曜日　午後３時５３分 
						

							You can change the transmission speed to prioritize transmission quality or 
sound quality.
1 Stop or disable the Bluetooth
® transmission of the device.
2Press [   ].
MODE 1 → MODE 2: The Beep sound twice
MODE 2 →MODE 1: The Beep sound once
•MODE 1: For stable communication.
•MODE 2: For good audio quality.
Note
• The default setting is MODE1.
• To listen to audio from this unit, please reconnect using Bluetooth
®.
To clean this unit, wipe with a soft, dry cloth.Note
•  Never use alcohol, paint thinner or benzine to clean this unit.
•  Before using chemically treated cloth, read the instructions that came with the cloth 
carefully.About Bluetooth
®
Frequency band usedThis unit uses the 2.4 GHz frequency band, however other devices may use this frequency as 
well. To avoid interference with other wireless devices, please follow the cautions listed below.Certification of this deviceThis unit conforms to frequency restrictions and has received certification based on frequency 
laws, so a wireless permit is not necessary.
However, the following action is punishable by law in some countries:
• Taking apart/modifying the unit.Usage restrictions• Wireless transmission and/or usage with all Bluetooth
® equipped devices is not guaranteed.
• Compatible mobile phones capable of wireless transmission include and comply to 
standards set by the Bluetooth SIG, Inc. However, if the mobile phone is optimized to meet 
standard specifications, some functions may work. Even so, depending on the 
specifications and settings of the mobile phone, a connection may not be established, nor 
are the methods of operation, display, or operation guaranteed.
• This unit supports Bluetooth
® security features, however depending on the operating 
environment and/or settings, this security may not be sufficient. Use caution when 
transmitting data wirelessly.
• Please be aware that Panasonic accepts no responsibility for data and/or information that 
may be compromised during a wireless transmission.
Range of useUse this device within an unobstructed 10 m (33 ft.) range. The range of usage or perimeter 
may be shortened depending on any obstructions, devices causing interference, other people 
in the room, or the construction of the building. Please note that the range mentioned above is 
not guaranteed.Effects from other devices• It is possible that this unit may not operate correctly or you may experience other effects of 
instability such as “broken up” audio, etc. when other devices are placed within close 
proximity. Therefore, in order to prevent signal interference, we recommend separating this 
unit from the following devices during use:
Microwave oven/Wireless LAN/Electronic devices/Audio & Video devices/Office Assistant 
machines & devices/Digital cordless phones/Fax machines, etc.
• If you live in close proximity to a broadcasting studio and the signal is too strong, the unit 
may not operate correctly.
• When using a notebook PC with a wireless LAN transmitter, do not use this unit and the 
wireless LAN at the same time.
• If you are still experiencing noise even outside of the 5 m (16.4 ft.) range of a wireless LAN 
device, turn the power to the wireless LAN device off.Intended usage limitationsThis unit is intended for normal, general use. This unit is not developed or manufactured with 
the intention of use in “high safety”* or hazardous occupations. Do not use this unit in these 
kinds of environments or occupations.* The following examples require extreme caution, and can directly result in loss of life, or extreme 
bodily harm.e.g.)
Nuclear Engineering, and control of a nuclear reaction/automated control of aircraft/air traffic 
control management/controlling movement of heavy freight systems/control of life support or 
extension systems/control of weapons systems and/or missile launch systems, etc.Switching transmission
MaintenanceThe Bluetooth
® word mark and logos are owned by the Bluetooth SIG, Inc. and any 
use of such marks by Panasonic Corporation is under license. 
Other trademarks and trade names are those of their respective owners.
Before requesting service, make the following checks.
If you are in doubt about some of the check points, or if the solutions 
indicated in the following guide do not solve the problem, refer to “Customer 
Services Directory (United States and Puerto Rico)”.The device cannot be connected.
• The pairing of the device was unsuccessful. Read the instructions and try 
again.
• The pairing of the device has been replaced. Do pairing again.
• Delete the pairing information for this unit from the Bluetooth
® device, then 
perform the pairing operation again. (See “Pair with another device and 
listen to audio”)
• Make sure that this unit is not connected to a different device.
The device is connected but audio cannot be heard through this unit.
• For some built-in Bluetooth
® devices, you have to set the audio output to 
“SC-MC07” manually. Read the operating instructions of the device for 
details.
Sound from the device is cut off.
• Sound may be disrupted if signals are blocked. When you hold this unit, do 
not fully cover this unit with your palm, etc.
• The device is out of the 10 m (33 ft.)
 communication range. Move the 
device nearer to this unit. (See “About Bluetooth
®”)
• Remove any obstacle between this unit and the device.
• Switch off any wireless LAN device.
• Select “MODE 1” for stable communication. (See “Switching transmission”)• If the indicator lights up red, please replace the batteries. (See “Inserting 
the batteries”)The power supply of the unit cuts out or you hear a noise.
• If you turn the volume up too high when the unit is connected to your 
computer, you may find that the unit is turned off or you may hear a noise.
In this case, please turn down the volume of the unit.When you turn on the unit, audio is not output and the indicator blinks 
alternately in red and blue.
• A problem has occurred. Disconnect the USB cable from the speaker and 
remove the batteries. After waiting for a few moments, reconnect the USB 
cable or reinsert the batteries and turn on the power. If the problem 
continues, contact the dealer.When the following situations occur, refer to the instructions below to reset 
the memory:
– There is no response when buttons are pressed.
– You want to clear and reset the memory.
1 Press [Í/I] to turn the power on.
2 Press and hold [Í/I] for about 10 seconds until the indicator turns off.• All the settings are set back to the factory preset.
• The pairing device information will have been deleted by the reset, so it will be necessary 
to perform pairing again. Delete the pairing information for this unit from the Bluetooth
® 
device, then perform the pairing operation again. (See “Pair with another device and 
listen to audio”)
Troubleshooting
 Amplifier sectionRMS output power: 1 W per channel (8≠), 1 kHz, 5 % THD
Total RMS power: 2 W
FTC output power: 0.7 W per channel (8≠), 60 Hz to 16 kHz, 1 % THD
Total FTC power: 1.4 W
Total harmonic distortion:  0.15 % (1 kHz)
S/N ratio: 87 dB (1 kHz, 20 kHz LPF)
Speaker: φ36 mm (1 
3/8q) (8≠) k 2
Bluetooth
® section
Bluetooth
® system specification: Ver. 2.1 i EDR
Wireless equipment classification: Class 2 (2.5 mW)
Supported profiles: A2DP
Frequency band: 2402 - 2480 MHz
(Adaptive Frequency Hopping)
Driving distance:  10 m (33 ft.) Line of Sight
(iPhone 4, at height 1 m (3.3 ft.), in “MODE 1”)
GeneralPower supply:
Panasonic alkaline battery:  AA size/LR6 k 2, DC 3.0 V
USB power supply:  DC 5.0 V
Operating temperature range: 0oC to i40oC (i32
oF to i104
oF)
Operating humidity range:  20% to 80% RH (no condensation)
Dimensions (W 
k H k D): 103 mm 
k 41.9 mm 
k 103 mm (4 
1/16q k 1 21/32q k 4 1/16q)
Mass (Weight):  Approx. 216g (7.6 oz) (with batteries)
Approx. 170g (6.0 oz) (without batteries)
Battery duration time: Approx. 4 hours
(Panasonic alkaline battery LR6 Type)Note• Specifications are subject to change without notice. Mass and dimensions are approximate.• Total harmonic distortion is measured by the digital spectrum analyzer.Notes on Speakers• These speakers do not have magnetic shielding. Do not put them near devices easily 
influenced by magnetism.
• When you play at high levels for a long period, it can cause damage to the unit and 
decrease the life of the unit.
• Decrease the volume when you play distorted sound to prevent damage.Specifications
The model number and serial number of this product can be found on 
the top of the unit and the inside of the battery cover.
Please note them in the space provided below and keep for future 
reference.
MODEL NUMBER
SC-MC07
SERIAL NUMBERUser memo:DATE OF PURCHASE 
DEALER NAME 
DEALER ADDRESS
TELEPHONE NUMBER
Limited Warranty
(ONLY FOR U.S.A. AND PUERTO RICO)
Panasonic Consumer Marketing Company of North America,
Division of Panasonic Corporation of North AmericaOne Panasonic Way, Secaucus, New Jersey 07094Panasonic Home Audio Products Limited WarrantyLimited Warranty Coverage (For USA and Puerto Rico Only)If your product does not work properly because of a defect in materials or workmanship, Panasonic 
Consumer Marketing Company of North America (referred to as “the warrantor”) will, for the length of 
the period indicated on the chart below, which starts with the date of original purchase (“warranty 
period”), at its option either (a) repair your product with new or refurbished parts, (b) replace it with a 
new or a refurbished equivalent value product, or (c) refund your purchase price. The decision to 
repair, replace or refund will be made by the warrantor.
During the “Labor” warranty period there will be no charge for labor. During the “Parts” warranty 
period, there will be no charge for parts. This Limited Warranty excludes both parts and labor for non-
rechargeable batteries, antennas, and cosmetic parts (cabinet). This warranty only applies to products 
purchased and serviced in the United States or Puerto Rico. This warranty is extended only to the 
original purchaser of a new product which was not sold “as is”.Carry-In or Mail-In ServiceTo find a service center please visit http://www.panasonic.com/help
 or call 
1-800-211-PANA (7262).
When shipping the unit, carefully pack, include all supplied accessories listed in the Owner’s Manual, 
and send it prepaid, adequately insured and packed well in a carton box. When shipping Lithium Ion 
batteries please visit our Web Site at www.panasonic.com/BatteryHandling
 as Panasonic is committed 
to providing the most up to date information. Include a letter detailing the complaint, a return address 
and provide a daytime phone number where you can be reached. A valid registered receipt is required 
under the Limited Warranty.
IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE.Limited Warranty Limits And ExclusionsThis warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT 
COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER 
damages which occurred in shipment, or failures which are caused by products not supplied by the 
warrantor, or failures which result from accidents, misuse, abuse, neglect, mishandling, 
misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, 
improper maintenance, power line surge, lightning damage, modification, introduction of sand, 
humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of 
the product, or service by anyone other than a Factory Service Center or other Authorized Servicer, or 
damage that is attributable to acts of God.THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED WARRANTY COVERAGE”.THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING 
FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY.(As examples, this excludes damages for lost time, travel to and from the servicer, loss of or damage 
to media or images, data or other memory or recorded content. The items listed are not exclusive, but 
for illustration only.)ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE 
LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.Some states do not allow the exclusion or limitation of incidental or consequential damages, or 
limitations on how long an implied warranty lasts, so the exclusions may not apply to you.
This warranty gives you specific legal rights and you may also have other rights which vary from state 
to state. If a problem with this product develops during or after the warranty period, you may contact 
your dealer or Service Center. If the problem is not handled to your satisfaction, then write to the 
warrantor’s Consumer Affairs Department at the addresses listed for the warrantor.PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR RESPONSIBILITY.
As of January 2012
Product or Part Name Parts LaborAudio Products (except items below) 1 year 1 year
DVD Home Theater System 1 year 1 year
Home Theater Audio System 1 year 1 year
SD Memory Cards, Rechargeable Battery 
Packs (defective exchange)90 days Not
ApplicableCustomer Services Directory (United States and Puerto Rico)Obtain Product Information and Operating Assistance; locate your nearest Dealer or Service Center; 
purchase Parts and Accessories; or make Customer Service and Literature requests by visiting our 
Web Site at:
http://www.panasonic.com/helpor, contact us via the web at:
http://www.panasonic.com/contactinfoYou may also contact us directly at:1-800-211-PANA (7262)
Monday-Friday 9am-9pm,
Saturday-Sunday 10am-7pm ESTFor hearing or speech impaired TTY users, TTY: 1-877-833-8855Accessory Purchases (United States and Puerto Rico)
Purchase Parts, Accessories and Instruction Books online for all Panasonic Products by visiting our 
Web Site at:
http://www.pstc.panasonic.comOr, send your request by E-mail to:
[email protected] may also contact us directly at:
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only)
(Monday-Friday 9am-9pm EST)
Panasonic National Parts Center
20421 84th Ave. S., Kent, WA 98032
(We accept Visa, MasterCard, Discover Card, American Express)For hearing or speech impaired TTY users, TTY: 1-866-605-1277
SC-MC07P.fm  2 ページ  ２０１２年５月１６日　水曜日　午後３時５３分