Home
>
Panasonic
>
Microwave Oven
>
Panasonic Commercial Microwave Ovens Ne2180 Ne3280 Operating Instructions
Panasonic Commercial Microwave Ovens Ne2180 Ne3280 Operating Instructions
Here you can view all the pages of manual Panasonic Commercial Microwave Ovens Ne2180 Ne3280 Operating Instructions . The Panasonic manuals for Microwave Oven are available online for free. You can easily download all the documents as PDF.
Page 1
!#ΙΙ 11PROG A BSTAGE HI MED LOW DEFHOLDPOWERSHIFT12345678STOPCLEAR TIMESTARTAB( AM)( PM)23 Operating Instructions R Please read these instructions completely before operating this oven. NE-2180/NE-3280 Commercial Microwave Ovens Before Calling for Service: If failure code “F**” appears in the display, unplug oven and wait for 10 seconds before reconnecting. If normal operation does not resume, call the service agent with the information of failure code. TM
Page 2
Contents PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Installation and Grounding Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Power Source Voltage Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....
Page 3
PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY (a) Do not attempt to operate this oven with the door opensince open-door operation can result in harmful exposure to microwave energy. It is important not to defeat or tamper with the safety interlocks. Under normal conditions, the oven will not operate with the door open. (b) Do not place any objectbetween the oven front face and the door, or allow soil or cleaner residue to accumulate on sealing surfaces.(c) Do not operate the ovenif...
Page 4
1. Do not attempt to tamper with or make any adjustments or repairs to the door, control panel housing, safety interlock switches or any other part of the oven. Do NOT remove the outer panel of the oven. Repairs should only be done by a qualified service person. 2. Do NOT operate the oven empty. The microwave energy will reflect continuously throughout the oven if no food or water is present to absorb energy, this could damage the oven and result in the danger of a fire. 3. If a fire occurs in...
Page 5
Your microwave oven is factory set for 208 V operation. For 220 V - 240 V operation, the following adjustment MUST be made. (Step 1) Unplug the oven. (Step 2) Unscrew the voltage adjustment cover which is located on the back of the oven. Do not remove any other parts from the oven. (Step 3) Remove the connector from the white socket and rotate it 180 degrees and plug it into black socket. (see sketch) (Step 4) Reattach the voltage adjustment cover to the cabinet. For 220 V - 240 V Plug the connetcor...
Page 6
- 6 - Outline Diagram This oven is preset at the factory for the following: Manual operation Memory pads preset HIGH power at the indicated heating times for single stage heating 1 = 10 sec. 2 = 20 sec. 3 = 30 sec. 4 = 45 sec. 5 = 1 min. 6 = 1 min. 15 sec. 7 = 1 min. 30 sec. 8 = 2 min. (There are two sides, A and B. Only A-side is preset.) Program Unlock Cycle Counter set to “0” on all pads If you wish to change these times, please consult the operating instructions to find how to program them. 11...
Page 7
- 7 - How to Operate Example: To cook food at HIGH power for 2 minutes INSTRUCTIONDIGITAL DISPLAY WINDOWPA D 2Press Power Level Selector pad once. ☛The selected power level will be indicated and 1st Stage Heating Indicator “1” will start to blink. Note:Press once for HIGH power, twice for MEDIUM power, 3 times for LOW, four times for DEFROST and 5 times for HOLD. POWER11STAGE HI 3Set the desired heating time using the Timer Dial. ☛The selected heating time will appear. Note:up to 15 min. on HIor MED, 60...
Page 8
- 8 - How to Operate INSTRUCTIONDIGITAL DISPLAY WINDOWPA D Follow steps 1 to 3 on page 7. 11STAGE HI 4Press Power Level Selector pad four times. ☛The selected power level will be indicated and 2nd Stage Heating Indicator “2” will start to blink. POWER11STAGE DEF2 5Set the desired heating time for the second stage using the Timer Dial. ☛The set heating time will appear. Note:up to 15 min. on HIor MED, 60 min. on LOW, DEFor HOLD 11STAGE DEF2 6Press Start pad. ☛The oven lamp will turn on. The total time for...
Page 9
- 9 - How to Operate B. PROGRAMMED HEATING In Program Unlock Mode: INSTRUCTIONDIGITAL DISPLAY WINDOWPA D 2Press the Desired Memory Pad “5”. ☛The currently programmed information will be indicated. 511 PROG A STAGE HI 3Press Start pad. ☛The oven lamp will turn on and heating will start. The heating time will count down. START11 PROG A STAGE HI MAKE SURE THE UNIT IS PROGRAMMED TO YOUR SPECIFICATION OR NEEDS(see page 10). • When all time expires, beep tone will sound and heating will stop. The oven lamp...
Page 10
- 10 - How to Operate 4Press Power Level Selector pad four times. ☛The selected power level will be indicated, “PROG” and 1st Stage Heating Indicator “1” will start to blink.POWER11 PROG A STAGE DEF 5Set the desired heating time using Timer Dial. ☛The set heating time will appear. Note:up to 15 min. on HIor MED, 60 min. on LOW, DEForHOLD 11 PROG A STAGE DEF 6Press Program Entry Button again. ☛“PROG” and 1st Stage Heating Indicator “1” will stop blinking. This means that you have completed programming....