Panasonic Combination Vcr Pv C923 Operating Instructions

11
REPLACING THE FUSE IN THE CAR
BATTERY CORD PLUG
NOTES: • ALWAYS TURN OFF TV/VCR FIRST BEFORE
SWITCH ON OR OFF THE IGNITION OF CAR
ENGINE.
• Make sure that the negative terminal of the
battery is grounded. This set is designed for
use with negative ground system only.
• Use the supplied car cord only.
• When the TV/VCR is not in use, always
disconnect it from the car cigarette lighter
socket to avoid a battery drain.
• If the TV/VCR is to be directly connected to a
12V DC power source, for example,...

12
UHF/
VHF
SYSTEM  SETUP
CLOCK  SET
LANGUAGE/IDIOMA/LANGUE
AUTO CLOCK     ON   OFF
STANDARD  TIME
DAYLIGHT  SAVING  TIME
á+/–/ENTER/MENUñ
M E N U
TIMER REC SET
TV SETUP
CH SETUP
AUTO REPEAT   ON   OFF
SYSTEM  SETUP
á+/–/ENTER/MENUñ
This TV/VCR can display the on screen language in
English, Spanish or French.
On-screen language selection (step 3) will automati-
cally appear on the screen when you press the MENU
button initially. Select the language you prefer first,
then proceed with the other menu...

13
1Press the MENU button. Press
the SET/TRACKING + or Ð button
to select the SYSTEM SETUP
option, then press the ENTER
button.
2Press the SET/TRACKING + or Ð
button to select the DAYLIGHT
SAVING TIME option, then press
the ENTER button.
3Press the SET/TRACKING + or Ð
button to select ÒONÓ or ÒOFFÓ,
then press the ENTER button.
Press the MENU button until the
MENU screen is cleared.
ON:forward one hour
OFF:back one hour
NOTES: ¥When shipped from factory, the DAYLIGHT
SAVING TIME option is set to OFF...

14
You must set the date and time manually for Timer
Recordings, ON/OFF Timer and Daylight Saving Time
if the Auto Clock process did not set them correctly.
EXAMPLE: Setting the clock to Ò8:30 AMÓ, 29th (WED)
October, 2003.
1Press the MENU button.Press the SET/TRACKING + or Ð
button to select the SYSTEM
SETUP option, then press the
ENTER button.
2Press the SET/TRACKING + or Ð
button to select the CLOCK SET
option, then press  the ENTER
button.
3Press the SET/TRACKING + or Ð
button to set the month,  then...

15
Press the DISPLAY button. The clock, date, channel
number, real time tape counter, tape speed and VCR
operation will be indicated.
Press the DISPLAY button again to disappear the call display.
Press the MUTE button to switch
off the sound. The TV/VCR’s sound
will be silenced and “MUTE” will
briefly appear on the screen. The
sound can be switched back on by
pressing this button again or one
of the VOL + or – button.MUTE
Press and release the CH C or D
button. The channel automatically
stops at the next...

16
1Press the MENU button.
2Press the SET/TRACKING + or
Ð button to select the CH SETUP
mode, then press the ENTER
button.
3Press the SET/TRACKING + or
Ð button to select the AUTO CH
MEMORY mode, then press the
ENTER button. The TV/VCR will
begin memorizing all the chan-
nels available in your area.
Channel numbers will remain red
until auto memorizing is complete.
4Press the MENU button until the MENU screen is
cleared.
CH  SETUP
  TV   CATV
AUTO  CH  MEMORY
ADD/DELETE
á+/–/ENTER/MENUñ
M E N U
TIMER REC...

17
TO SET THE V-CHIP
1Press the MENU button.
2Press the SET/TRACKING + or
– button to select the CH SETUP
mode, then press the ENTER
button.
3Press the SET/TRACKING + or
– button to select the ADD/
DELETE mode, then press the
ENTER button.
4Select the desired channel to be
memorized or deleted using the
SET/TRACKING + or – button,
or using the Direct Channel
Selection buttons (10 keys, 0-9).
5Press the ENTER button to
select the ADD or DELETE.
If you select an unmemorized
channel, the Channel indication...

18
NOTES: ¥The TV/VCR will automatically turn off approxi-
mately 1 hour later after the ON TIMER turns on
if no OFF TIMER has been set. To continue
watching the TV, press any button to cancel the
one hour automatic shut off.
¥To cancel ON TIMER, follow above steps 1-5,
then press the SET/TRACKING + or Ð button to
select the CANCEL. Press the MENU button
repeatedly to return to the normal screen.
¥After setting the ON TIMER,  
  of the OFF TIMER
will flash on and off. If you wish to set the OFF
TIMER,...

19
BRIGHTNESSPress the ENTER button until
ÒBRIGHTNESSÓ appears on the
screen, then press the SET/
TRACKING + or Ð button to adjust
the brightness of the picture. When
the SET/TRACKING + button is
pressed, the darker portions of the picture become lighter.
CONTRASTPress the ENTER button untilÒCONTRASTÓ appears on the screen,then press the SET/TRACKING + or
Ð button to adjust the contrast of the
picture. Pictures look  sharpest in
the daytime (bright light) by increasing the contrast. At
night (dim light),...

20
When a tape is played, the Digital
Auto Tracking system automatically
adjusts the tracking to obtain the
best possible picture. If noise bars
appear during playback, adjust the
tracking manually as follows:
¥Press the Manual SET/
TRACKING + or Ð button to obtain
the best possible picture.
ÒMANUAL TR.Ó will appear for 4
seconds on the screen.
To resume automatic tracking,
press the TRACKING AUTO button.
ÒAUTO TR.Ó will appear for 4 seconds on the screen. Push the center of the tape until it is...