Panasonic Combination VCR AG-513F, AG-520F Operating Instructions

2121
TV Operation
5
1) Press     to select 
CC ON MUTE.
2) Press   repeatedly to 
select desired  mode.
  Each press of    will change 
the display as shown left. 
  The caption may be broadcast 
over CAP C1 or C2.
1
2
4
6 3
7
Press ACTION three times to 
return to the normal screen.
NOCAP C1
CAP C2
SELECT :                  SET : END       : ACT I ON   
M A I N  MENU
EX I TCLOCKC H
LANGUAGE
SET          : ACT I ON SELECT  :                              
LOCKT V
  Caption On Mute Feature
Closed Caption...

2222
Press PROG to 
end the program. 
To Enter More Programs, 
press 
    to select 
and    to set a blank 
program number, and 
then repeat step 3.
4
P  DT  START    STOP    CH  SPD
1            day  9 : 00 p  12 : 00a  08     SP2   -- -- : --   -- : --  --  --3   -- -- : --   -- : --  --  --4   -- -- : --   -- : --  --  --
CANCEL : ADD / DLT
SELECT :                  SET : END       : PROG
Press PROG twice to exit this mode.  If you’re using a cable box, make sure that it is tuned 
to the desired...

2323
Timer Operation
Repeat steps 1 and 2 on page 22.
1
P  DT  START    STOP    CH  SPD1   day    9 : 00p 12 : 00a  08     SP2     8  10 : 00a 12 : 00p 125    SP3   10    8 : 00p  9 : 00p  10    SP4   SU    9 : 00p 10 : 00p     L    LP
CANCEL : ADD / DLT
SELECT :                  SET : END       : PROG
8  SAT  9:00P  12: 00A 08TODAY
----------------------------------------------
DATE       START       STOP       CH
   SP
SELE
CT :                  SET : END       : PROG
Press PROG twice to exit this...

2424
Search System is ...Each time a recording is made, an invisible index mark is placed on the tape. When timer recordings are 
made, program index and information are also included. These index marks can be used to access or 
scan recordings.
1
Press SEARCH in 
Playback or Stop 
mode to display 
INDEX SEARCH 
screen, and then 
press number keys 
to select the recording 
number.
  To calculate number, see 
below.
Press FF or REW to 
start search.
  Index Search
Go directly to the desired recording.
2...

2525
Advanced Operation
  Auto Operation Functions
 
Tape Position Display
Press TAPE POSITION to detect current tape 
position.
1
DETECT I NG  TAPE  POS I T I ON
2
■  Auto Shut Off      No broadcast signal in TV (Only when 
Weak Signal Display is set to OFF), 
blank tape is Played for 5 minutes 
➞ Power turns off 
        This feature is canceled if any button is 
pressed during above mode. 
■ Auto Playback
     Insert a tape in Power off mode 
➞ Power turns on  
        Playback begins if tape has no...

2626
  Zero Search
To quickly return to a speci c tape counter location. 
1
2
Press STOP.
4
53
Continue playback, rewind, or fast 
forward.
Press COUNTER 
RESET at the 
desired position to 
reset to “0:00:00.”
  Unit goes into FF or REW mode and stops at the last 
point the Counter was set to 0:00:00.
Press COUNTER RESET during 
playback to display the Counter.
Press CM/ZERO in 
stop mode to start 
ZERO SEARCH.1 : 23 : 45
0 : 00 : 00
Press CM/ZERO repeatedly to select skip 
time in Play mode.
  No...

2727
Advanced Operation
  Repeat Play
Set to see a recording over and over.
  Playback repeats when tape end is reached or 
unrecorded portion over 30 seconds is detected.
PLAYREPEAT  ON
PLAYREPEAT  OFF
PLAY/REPEAT
POWERPOWER
VIDEO IN
AUDIO IN
VOL CHSTOP/EJECTREW/
PLAY/REPEATFF/
RECINPUTACTIONR E C ON TIMERPROG TIMER
In PLAY mode, 
press 
PLAY/REPEAT 
on the unit to 
turn “ON.” 
Repeat above to 
turn “OFF.”
Note
  Play Lock mode
The unit may be locked in Repeat Play mode so
that all other function keys...

2828
1) Press     to select 
WEAK SIGNAL 
DISPLAY .
2) Press 
   to set “ON” or 
“OFF.”
1) Press       
 to 
select “CH.”
2) Press ACTION to 
display SET UP 
CHANNEL screen.
When “ON” is selected, the picture is displayed even when 
a broadcast signal is weak or non-existent.
ANTENNA  :   CABLE
AUTO   SETWEAK  S I GNAL   D I SPLAY : OFF
           SET  UP  CHANNEL 
SELECT :                  SET : END       : ACT I ON   
M A I N  MENU
CLOCKC H
SET          : ACT I ON  SELECT  :...

2929
Advanced Operation
Press ACTION to display MAIN MENU.
 
Enter Secret Code
V-Chip Control Feature is...
This unit has a built-in V-Chip Control 
which allows you to block unwanted TV 
usage based on US MOVIES and US TV 
PROGRAMS Ratings.
A 4-digit code must be entered to view a blocked program 
or change rating settings.
1
  DO NOT forget your secret code.
  Once ratings are set, restricted tapes or programs cannot be 
accessed unless the secret code is entered.
Changing your secret code
 You will...

3030
Enter Code
1
1) Press  to 
select US 
MOVIES.
2) Press 
   to set  
“ON” or “OFF.”
If LOCK menu is not displayed, do “Enter Secret 
Code” steps on page 29.
Setup US MOVIES Ratings
Note
  “NEXT PAGE” displays CANADIAN V-Chip setting 
menu. Not necessary except when viewing Canadian 
tapes or broadcasts.
1
1) Press     to 
select US TV 
PROGRAMS.
2) Press 
   to set  
“ON” or “OFF.”
Setup US TV PROGRAMS Ratings
Note
  “NEXT PAGE” displays CANADIAN V-Chip setting 
menu. Not necessary except when...