Panasonic Color Laser Printer Kx P8415 Specification Instructions
Have a look at the manual Panasonic Color Laser Printer Kx P8415 Specification Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 3
Settings and Printing
MaintenanceSpecifications3
Paper output
Up to 500 sheets [75 g/m2(20 lbs.)]
Resolution
600 x 600 dpi (Standard)
1200 x 1200 dpi*
1(Premium)
*
1It is possible to print a single-sided document at 1200 x 1200 dpi with the standard 32 MB of
memory. However, you may experience a “Memory Overflow” error when printing complex
documents.
Should this be the case, you will have to use either a lower resolution or increase the printers
memory (see RAM buffer below).
Maximum printing speed
The...](http://img.usermanuals.tech/thumb/58/75230/w64_kx-p8415_en_spec_om_d-2.png "Page 3
Settings and Printing
MaintenanceSpecifications3
Paper output
Up to 500 sheets [75 g/m2(20 lbs.)]
Resolution
600 x 600 dpi (Standard)
1200 x 1200 dpi*
1(Premium)
*
1It is possible to print a single-sided document at 1200 x 1200 dpi with the standard 32 MB of
memory. However, you may experience a “Memory Overflow” error when printing complex
documents.
Should this be the case, you will have to use either a lower resolution or increase the printers
memory (see RAM buffer below).
Maximum printing speed
The...")
Settings and Printing MaintenanceSpecifications11 Always test a sample of the envelopes you are thinking of buying. Confirm that the envelope performs acceptably. For best printing results BAvoid printing in high humidity i.e., above 70%. High humidity may cause the envelope to curl and pick up excess toner. High humidity may also cause the envelope to seal. BAvoid printing below 10°C (50°F) with less than 30% relative humidity. Low temperature with low humidity may cause light printing. Envelope storage is very important. Store them away from moisture and humid air, where they can lay flat and their edges won’t be bent or damaged. The humidity should not exceed 70% RH. Printer Driver Version of Windows ®*1: Windows 95*2, Windows 98*3, Windows NT®4.0*4(Intel Only) System Requirements CPU: Pentium 133 MHz or greater Operating System: Windows 95, Windows 98 or Windows NT 4.0 (Intel Only) RAM: 16 MB or more (More than 32 MB is recommended.) Free disk space 100 MB or more Virtual memory: 16 MB or more (More than 32 MB is recommended.) for Windows 95 / Windows 98 50 MB or more (More than 100 MB is recommended.) for Windows NT 4.0. Drive: CD-ROM drive * 1Microsoft®Windows®operating system *2Microsoft®Windows®95 operating system (hereafter Windows 95) *3Microsoft®Windows®98 operating system (hereafter Windows 98) *4Microsoft®Windows NT®Workstation operating system, and Microsoft®Windows NT®Server network operating system Version 4.0 (hereafter Windows NT 4.0) Software Media/Software
Settings and Printing MaintenanceSpecifications12 Specifications Pin configuration Parallel Interface connector (printer side) NOTES B“Return” denotes the return side wire of a twisted pair cable and is connected to signal ground. BBe sure to use only a shielded cable. The printer will not operate properly if any of the pins is not connected. SignalSignal +5V(Peripheral)nSelectinReturn side pin 30 19 BusySignal Pin 1 20 Select 2 21 nAck 3 22 nFault 4 23 PError 5 24 Data 1 6 25 Data 2 7 26 Data 3 8 27 Data 4 9 28 Data 5 10 29 Data 6 11 Data 7 12 31 Data 8 Signal PinReturn side pin 13 32 nInit 14 33 nStrobe 15 34 16 35 nAutoFd 17 ¾ +5V(Host) 18 ¾ 36 18 361 19 IEEE 1284-B type connector Cable Use a shielded cable 2 m (6.6 ft.) or less in length. Connector Type Bidirectional Parallel Interface The bidirectional parallel interface is based on the IEEE P1284-B standard. If your computer has a bidirectional parallel port, the printer driver and printer can take advantage of faster data transfer. Bidirectional Parallel Interface