Panasonic Color Laser Printer Kx P8410 Operating Instructions

81
Using the Printer
&Output Order
Specifies whether the document exits face up or face down into the output
tray. This selection is not effective when the multi-purpose tray (MPT Plain
Paper, MPT Transparency, etc.) is selected in the Paper Source
( +P. 77). When the multi-purpose tray is selected, Face upis selected
automatically.
Hyper-Tetra Adjustment...
Adjusts the brightness, contrast, hue, saturation, or red, green, blue of the
image. For the adjustment, refer toUsing the Hyper-Tetra Adjustment
(...

82
Using the Printer
n When Panasonic KX-P8410 Document Settings is
selected
#Undo Changed Option
Returns the Page Setupand Advancedtab’s settings to the previous
settings.
$About KX-P8410 Printer Driver...
Displays the window that contains the program version and copyright
information.
#
$ 

83
Using the Printer
Click Start  , selectSettings, then clickPrinters.
The Printerswindow is displayed.
Click the Panasonic KX-P8410
icon.
Click the File menu, then click Properties.
The Panasonic KX-P8410 Propertieswindow is displayed.
Displaying the Panasonic KX-P8410 Properties Window 
(for Windows NT 4.0)
2 1
3
Click a tab to view the features.
Ports Tab( +P. 84)
SharingTab( 
+P. 88)
Device Settings Tab( 
+P. 91)
4
For the features of the other tabs, refer to the Help menu in the
Windows NT 4.0. 

84
Using the Printer
#Checked port
Documents will print to the checked port.
$Add Port... button
Adds a new port ( +
P. 85 Installing the SCSI port)
Ports Tab (SCSI port)
Note:
BThis option is available only for Windows NT 4.0.
#
$ 

85
Using the Printer
n Installing the SCSI port
Notes:
BWhen printing through the SCSI port, the access speed between other
connected SCSI devices get slower.
BTo connect the KX-P8410 to your SCSI port, a SCSI driver and ASPI Manager
need to be installed. Refer to your SCSI board manual.
Click  Add Port...  .
The Printer Portswindow appears.1
Click  New Monitor...  .
The Installing Print Monitorwindow appears.2 

86
Using the Printer
Click  Browse....
Click  Cancel .
The Locate Filewindow is displayed.
Note:
BThe SCSI port cannot be installed through theMonitor.inffile copied to a
directory with long file name.
Insert the KX-P8410 Driver & Utility CD-ROMinto the CD-ROM
drive.
Select CD-ROM drive.
Open WinNT40, Disk2 then open Monitor.inffile.
Click  OK.
The Printer Portswindow is displayed.
3
4
5
6
7
8 

87
Using the Printer
Click  New Port...  .
The Port Namewindow is displayed.
Type the port name (for example; KXP8410GDI), then click
OK.
The Printer Portswindow is displayed.
Click  Close.
9
10
11 

88
Using the Printer
#Shared
To share the printer over the network. 
For the setup operation, refer to Sharing the printer with a client
computer( +
P. 89).
$Alternate Drivers
To install an alternate driver.
For the installation, refer to Installing an alternate driver( +
P. 89).
Sharing Tab
#
$ 

89
Using the Printer
n Sharing the printer with a client computer
Click Shared.
Type the printer name (for example: KX-P8410).
Note:
BIf the shared printer is used through Windows 95, the printer name must not
exceed 12 characters.
Click  OK  .
n Installing an alternate driver (for example: Windows 95)
Select Windows 95, then click  OK  .
The Insert Diskwindow is displayed.
Click  OK  .
The Printer Drivers for Windows 95window is displayed.
Click  Browse...  .
1
2
3
1
2
3 

90
Using the Printer
Click  Cancel  .
The Locate Filewindow is displayed.
Insert the supplied KX-P8410 Driver & Utility CD-ROMinto the
CD-ROM drive.
Select CD-ROM drive.
OpenWin95, Disk2, then open KXP8410.inffile.
The Printer Drivers for Window 95 window is displayed.
Click  OK  .
6
7
8 4
5