Home
>
Panasonic
>
Security Camera
>
Panasonic Color CCTV Camera Wv Cw504 Series Operating Instructions
Panasonic Color CCTV Camera Wv Cw504 Series Operating Instructions
Have a look at the manual Panasonic Color CCTV Camera Wv Cw504 Series Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 22
22
Step 1
Set "SYNC" to "LL" and press the setting button.
→ The "SYNC" screen appears.
Step 2
Connect the video output signal and external synchronizing input signal of the camera to a 2-input oscilloscope, and move the cursor
to "COARSE".
Step 3
Adjust the oscilloscope to the vertical rate, and extend the vertical sy\
nchronizing part of the oscilloscope.
Move the cursor horizontally with use of the right or left button to roughly adjust the vertical phase.
The...](http://img.usermanuals.tech/thumb/58/72258/w64_wv-cw504_series_oi__d-21.png "Page 22
22
Step 1
Set \"SYNC\" to \"LL\" and press the setting button.
→ The \"SYNC\" screen appears.
Step 2
Connect the video output signal and external synchronizing input signal of the camera to a 2-input oscilloscope, and move the cursor
to \"COARSE\".
Step 3
Adjust the oscilloscope to the vertical rate, and extend the vertical sy\
nchronizing part of the oscilloscope.
Move the cursor horizontally with use of the right or left button to roughly adjust the vertical phase.
The...")
![Page 23
23
Step 3
Move the cursor to "POSITION" and press the setting button.
Step 4
Use the up, down, right, and left buttons to determine the left upper po\
sition of the zone to be set and press the setting button.
Step 5
Use the up, down, right, and left buttons to determine the lower right p\
osition of the zone to be set and press the setting button.
→ The asterisk mark "*" will be displayed after the number and the zone se\
tting will be saved.
Note:
• To delete a zone, select...](http://img.usermanuals.tech/thumb/58/72258/w64_wv-cw504_series_oi__d-22.png "Page 23
23
Step 3
Move the cursor to \"POSITION\" and press the setting button.
Step 4
Use the up, down, right, and left buttons to determine the left upper po\
sition of the zone to be set and press the setting button.
Step 5
Use the up, down, right, and left buttons to determine the lower right p\
osition of the zone to be set and press the setting button.
→ The asterisk mark \"*\" will be displayed after the number and the zone se\
tting will be saved.
Note:
• To delete a zone, select...")
![Page 24
24
14. Electronic zoom setting [EL-ZOOM]
Select "On" or "Off" to determine whether or not to use the electronic zoom.
When "ON" is selected, the zoom factor and the panning/tilting settings \
can be configured.
ON: Uses the electronic zoom.
OFF (default): Does not use the electronic zoom.
Follow the procedure below. Step 1
Move the cursor to "EL-ZOOM", select "ON" and press the setting button.
→ The "EL-ZOOM" screen will be displayed.
Step 2
Move...](http://img.usermanuals.tech/thumb/58/72258/w64_wv-cw504_series_oi__d-23.png "Page 24
24
14. Electronic zoom setting [EL-ZOOM]
Select \"On\" or \"Off\" to determine whether or not to use the electronic zoom.
When \"ON\" is selected, the zoom factor and the panning/tilting settings \
can be configured.
ON: Uses the electronic zoom.
OFF (default): Does not use the electronic zoom.
Follow the procedure below. Step 1
Move the cursor to \"EL-ZOOM\", select \"ON\" and press the setting button.
→ The \"EL-ZOOM\" screen will be displayed.
Step 2
Move...")
![Page 25
25
Back focus setting [BACK-FOCUS SETUP]
Selects the back focus setting type and performs fine adjustment. The following setting can be configured on the "BACK-FOCUS
SETUP" screen displayed from the top screen. Refer to page 5 for how to call up the screen.
The lens adjustment (☞ Installation Guide) shall be performed before the back focus adjustment.
The back focus adjustment is performed by changing the distance between \
the lens and focal point.
Follow the procedure...](http://img.usermanuals.tech/thumb/58/72258/w64_wv-cw504_series_oi__d-24.png "Page 25
25
Back focus setting [BACK-FOCUS SETUP]
Selects the back focus setting type and performs fine adjustment. The following setting can be configured on the \"BACK-FOCUS
SETUP\" screen displayed from the top screen. Refer to page 5 for how to call up the screen.
The lens adjustment (☞ Installation Guide) shall be performed before the back focus adjustment.
The back focus adjustment is performed by changing the distance between \
the lens and focal point.
Follow the procedure...")
![Page 27
27
Special menu setting [SPECIAL SETUP]
The special menu setup is performed including the setting of the camera image quality and the communication configuration when a
receiver is used. The following settings are to be configured on the "SPECIAL SETUP" screen displayed from the top screen. Refer to
page 5 for how to call up the screen.
Chroma level adjustment [CHROMA GAIN]
Use the right or left button to adjust the color density of the camera image. When the level indicator moves in...](http://img.usermanuals.tech/thumb/58/72258/w64_wv-cw504_series_oi__d-26.png "Page 27
27
Special menu setting [SPECIAL SETUP]
The special menu setup is performed including the setting of the camera image quality and the communication configuration when a
receiver is used. The following settings are to be configured on the \"SPECIAL SETUP\" screen displayed from the top screen. Refer to
page 5 for how to call up the screen.
Chroma level adjustment [CHROMA GAIN]
Use the right or left button to adjust the color density of the camera image. When the level indicator moves in...")
![Page 28
28
Flaw compensation [PIX OFF]
Flaws in the displayed camera image are corrected. Up to 16 points can be corrected.
Follow the procedure below. Step 1
Move the cursor to "PIX OFF" and press the setting button.
→ The "PIX OFF" screen appears.
Step 2
Select a number (1 to 16) with which a pixel compensation point is registered and press the setting button.
→ The pixel compensation positioning screen appears.
Step 3
Use the up, down, right, and left buttons to move the crosshair...](http://img.usermanuals.tech/thumb/58/72258/w64_wv-cw504_series_oi__d-27.png "Page 28
28
Flaw compensation [PIX OFF]
Flaws in the displayed camera image are corrected. Up to 16 points can be corrected.
Follow the procedure below. Step 1
Move the cursor to \"PIX OFF\" and press the setting button.
→ The \"PIX OFF\" screen appears.
Step 2
Select a number (1 to 16) with which a pixel compensation point is registered and press the setting button.
→ The pixel compensation positioning screen appears.
Step 3
Use the up, down, right, and left buttons to move the crosshair...")
![Page 29
29
Language selection [LANGUAGE SETUP]
A language for the setup menu is selected from the following: The language selection can be made on the "LANGUAGE SETUP"
screen displayed from the top screen. Refer to page 5 for how to call up the screen.
JAPANESE/ENGLISH (default)/FRANÇAIS/ESPAÑOL/DEUTSCH/ITALIANO/êìëëäàâ
To change the language to be used, use the right or left button to select\
the target language, move the cursor to "SET", and press the
setting button....](http://img.usermanuals.tech/thumb/58/72258/w64_wv-cw504_series_oi__d-28.png "Page 29
29
Language selection [LANGUAGE SETUP]
A language for the setup menu is selected from the following: The language selection can be made on the \"LANGUAGE SETUP\"
screen displayed from the top screen. Refer to page 5 for how to call up the screen.
JAPANESE/ENGLISH (default)/FRANÇAIS/ESPAÑOL/DEUTSCH/ITALIANO/êìëëäàâ
To change the language to be used, use the right or left button to select\
the target language, move the cursor to \"SET\", and press the
setting button....")
![Page 30
30
Shortcut operation
Use of a system controller with the "camera function" button allows users to perform the shortcut settings with use of the numeric
keypad and camera function button. The available shortcut operations wit\
h this unit are shown as follows:
System controller operationSetting contents
[8] + [3] + [Camera function] Super Dynamic ON (i-VMD)
[8] + [4] + [Camera function] Super Dynamic ON
[8] + [5] + [Camera function] Super Dynamic OFF
[9] + [0] + [Camera...](http://img.usermanuals.tech/thumb/58/72258/w64_wv-cw504_series_oi__d-29.png "Page 30
30
Shortcut operation
Use of a system controller with the \"camera function\" button allows users to perform the shortcut settings with use of the numeric
keypad and camera function button. The available shortcut operations wit\
h this unit are shown as follows:
System controller operationSetting contents
[8] + [3] + [Camera function] Super Dynamic ON (i-VMD)
[8] + [4] + [Camera function] Super Dynamic ON
[8] + [5] + [Camera function] Super Dynamic OFF
[9] + [0] + [Camera...")
![Page 31
31
System controller operationSetting contents
[2] + [1] + [1] + [Camera function] Scene change ON
[2] + [1] + [2] + [Camera function] Scene change OFF
[2] + [1] + [3] + [Camera function] Scene file 1
[2] + [1] + [4] + [Camera function] Scene file 2
[2] + [1] + [5] + [Camera function] Gain (AGC), 1 step up
[2] + [1] + [6] + [Camera function] Gain (AGC), 1 step down](http://img.usermanuals.tech/thumb/58/72258/w64_wv-cw504_series_oi__d-30.png "Page 31
31
System controller operationSetting contents
[2] + [1] + [1] + [Camera function] Scene change ON
[2] + [1] + [2] + [Camera function] Scene change OFF
[2] + [1] + [3] + [Camera function] Scene file 1
[2] + [1] + [4] + [Camera function] Scene file 2
[2] + [1] + [5] + [Camera function] Gain (AGC), 1 step up
[2] + [1] + [6] + [Camera function] Gain (AGC), 1 step down")
31 System controller operationSetting contents [2] + [1] + [1] + [Camera function] Scene change ON [2] + [1] + [2] + [Camera function] Scene change OFF [2] + [1] + [3] + [Camera function] Scene file 1 [2] + [1] + [4] + [Camera function] Scene file 2 [2] + [1] + [5] + [Camera function] Gain (AGC), 1 step up [2] + [1] + [6] + [Camera function] Gain (AGC), 1 step down
Panasonic System Solutions Company, Unit Company of Panasonic Corporation of North America www.panasonic.com/business/ For customer support, call 1.800.528.6747 Three Panasonic Way 2H-2, Secaucus, New Jersey 07094 Panasonic Canada Inc.5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada (905)624-5010 http://www.panasonic.ca Panasonic Sales CompanyPanasonic Puerto Rico, Inc. AVE 65de Inf, Km 9.5 Carolina, PR 00985 (787)750-4300 © Panasonic Corporation 2009 N0409-1709 3TR006044BZB Printed in China