Panasonic Color Camera AG-CK10P Operating Instructions

Model No.  AG-CK10P
	{
†Ì	{
S0806K4088 -M
Printed in Japan
Color  Camera
VQT1A21-4
\wh|xzÍƹǿ«
a
¼›S
M	Í[MhiVz‡\qtK“UqO
]_M‡b{
Ô	{
†Ì	{›‘XS¡ˆwOQz
Y`X†
¶tS–MXi^M{
Ô]–;
²t®†
¶	Íw]«™¯›
žcS¡ˆXi^M{
Ô
-	Â	{x®S
M	Í[Ô~
b
3ʯsrwGÖ›¬TŠz	{
†Ì	{q
q‹tG
~t-`oXi^M{
Operating Instructions
§å”§Ýå
Before operating this product, please read the instructions carefully 
and save this...

WARNING:
•  TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD, DO NOT 
EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. 
•  TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD, KEEP THIS 
EQUIPMENT AWAY FROM ALL LIQUIDS. USE AND STORE ONLY 
IN LOCATIONS WHICH ARE NOT EXPOSED TO THE RISK OF 
DRIPPING OR SPLASHING LIQUIDS, AND DO NOT PLACE ANY 
LIQUID CONTAINERS ON TOP OF THE EQUIPMENT.
CAUTION:
TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD AND 
ANNOYING INTERFERENCE, USE THE RECOMMENDED 
ACCESSORIES ONLY.
 indicates safety...

 indicates safety information.
FCC Note:
This equipment has been tested and found to comply with the limits 
for a class A digital device, pursuant to Part 15 of the FCC Rules. 
These limits are designed to provide reasonable protection against 
harmful interference when the equipment is operated in a commercial 
environment. This equipment generates, uses, and can radiate radio 
frequency energy, and if not installed and used in accordance with 
the instruction manual, may cause harmful interference to...

IMPORTANT SAFETY INSTRUCTIONS
(1) Read these instructions.
(2) Keep these instructions.
(3) Heed all warnings.
(4) Follow all instructions.
(5) Do not use this equipment near water.
(6) Clean only with a dry cloth.
(7)  Do not block any ventilation openings. Install in accordance with the 
manufacturer’s instructions.
(8)  Do not install near any heat sources such as radiators, heat registers, stoves, 
or any other equipment (including amplifiers) that produce heat.
(9)  Only use attachments/accessories...

E-4
ENGLISH
This Color Camera is designed for use only with the AG-CPD15P Memory Card Video 
Recorder and AG-CPD10CRUP Memory Card Video Recording System. Do not 
attempt to use it with any models other than the AG-CPD15P or AG-CPD10CRUP.
Included accessories
Wide conversion lens (installed on the Color Camera) .......................................... 1
Camera cable (divided into 2 pieces) ..................................................................... 1
Camera mount
∗...

B A
Front
E-5
Control reference guide
 REC lamp
You can set this to light or blink during 
recording, or to stay unlit all the time. 
For details on configuring settings, 
refer to the Operating Instructions of 
the Memory Card Video Recorder, or 
contact your supplier.
 Sunshade
Protects the lens from direct sunlight.
 Wide conversion lens
The wide conversion lens enables a 
wider viewing angle when recording 
video.
 Backlight compensation
button
Controls the backlight compensation 
function. (see page...

912
5 10
1
11
E-6
ENGLISH
Pin 
numberSignal
1GND (SHIELD)
2REC_LED_L
3RxD
4TxD
5GND (TxD/RxD)
6GND (V_OUT)
7DC_IN
8GND (DC_IN)
9REC_L
10AUTO_ZOOM_L
11BL_L
12V_OUT
Connector signals
Camera cable connector 
(female) 

IN CAR MIC
CAMERA 1
CONTROL PANEL
GPIO/SERIALUSB
GPS-ANT.
(OPTION)
CAMERA 2AUDIO IN
VIDEO OUTAUDIO OUT
7.5 m (24.6 feet) 
camera cable (provided)
0.5 m (1.64 feet) 
camera cable (provided)Memory Card Video Recorder 
(separately sold)
Color Camera
Camera cable 
connector
To connect : Grasp     on the 0.5 m (1.64 feet) camera cable, and 
align     with the camera cable connector. Rotate the 
plug to find the position where the guides match, 
and insert it in the direction of the arrow.
To disconnect :...

Camera operation


Zoom function
The camera has the capability for optical zoom (x22) and digital zoom (x10). 
The zoom function is controlled with the [ W ] button and the [ T ] button.
The maximum zoom factor is x220.
Note:
When zooming in on a subject from the wide end, zooming automatically 
pauses at the x22 limit of the optical zoom. To zoom beyond this limit with 
the digital zoom, release the zoom button momentarily and press it again, 
holding it down until the desired zoom factor is reached....

Troubleshooting


Starting up


During operating
Symptom Confirmation Details
Power does not come on.•  Is the camera cable connected correctly?
Refer to the connections on page E-7.
Unusual sound is heard.•  Some operating sounds may be evident when 
powering on, switching IR modes and zooming. 
Sounds in such cases do not necessarily 
indicate a problem.
Symptom Confirmation Details
Video is distorted or not 
recorded.(Refer to the Operating Instructions of the Remote 
Control Panel.)
•  Are camera and...