Panasonic Cf Vdw07chm Owners Manual

31
E
Mode :  Connect         OfflineView
Backlight : LOW MIDHIGH
Profile : Profile 1
Setting the Wireless Display
Menu ButtonPress Menu button.
The setting menus are displayed.
General Menu
By selecting [General], you can change the mode setting, the backlight setting and the
profile setting. You can establish the settings for the wireless display.
General Wireless Batter y Option Version
Default settings
100%ExcellentOK Cancel
The saved screen is displayed.
(
 page 38)
Electronic wave conditions...

32
E
Set the high temperature mode func-
tion to [Normal temperature] or
[High temperature].
When using the wireless display in a
high-temperature environment, be
sure to set the wireless display in the
high-temperature mode.
Setting the Wireless Display
Battery Menu
By selecting [Battery], the battery status will be displayed.
General Wireless Batter y Option Version
100%ExcellentOKCancel
Run the refresh battery.
When the confirmation message is
displayed, select [Yes].
Once the battery indicator turns...

33
E
Option Menu
By selecting [Option], you can establish the individual settings for the wireless display.
General Wireless Batter y Option Version
100%ExcellentOK Cancel
Default settings
Change the password that is input to
run the wireless display.
Set the resume function to [Normal
resume] or [Quick resume], then se-
lect [OK].
Normal resume:
The wireless connection is dis-
abled during display off.
Quick resume:
Only the screen is turned off dur-
ing display off.If there is no input from the...

34
E
Version Menu
By selecting [Version], the version information will be displayed.
General Wireless Batter y Option Version
Model No. : CF-VDW07Cxx
Firmware : Vx.xxLxxx
Wireless Controller : xx. xx. xx. xx
Serial No. :xxxxxxxxxx
100%ExcellentOK Cancel
(This screen is a sample.)
Setting the Wireless Display
“x” will change depending on the configuration of the wireless display. 

35
E
You can set the wireless display properties as follows.
1Select [Wireless Display Setup Utility] in the following
procedure.
Windows XP
[start] - [All Programs] - [Panasonic] - [Wireless Display
Setup Utility]
Windows 2000
[Start] - [Programs] - [Panasonic] - [Wireless Display
Setup Utility]
2Enter the Supervisor Password.
The Supervisor Password is not set at the time of the pur-
chase.
Press the Menu button, select [Option], then set the Su-
pervisor Password.  (
 page 33)
3Set the wireless...

36
E
Changing the Wireless Display Settings
4At the confirmation screen, select [Next].
The message “These settings will be sent to your display”
will then be displayed. Select [OK].
5
[Set up your PC] screen will be displayed.
Enter the Wireless LAN and TCP/IP settings shown on
the screen to your computer, then select [Finish].

[Completed] screen will be displayed.
Select [Finish].
The MeiWDS and the wireless display cannot simul-
taneously make settings. (
 page 37)
NOTE   

37
E
1Select [MeiWDS Setup Utility] in the following proce-
dure.
Windows XP
[start] - [All Programs] - [Panasonic] - [MeiWDS Setup
Utility]
Windows 2000
[Start] - [Programs] - [Panasonic] - [MeiWDS Setup Utility]
2Enter the Supervisor Password, then select [OK].
In the default setting, the Supervisor Password is set to
“supervisor”.
3Set the password and AES Encryption settings, then se-
lect [Next].
If the setting between the computer and wireless dis-
play does not confirm (e.g., the display has...

38
E
No 016
Total 038
Capturing the Screen
Capture Button
If you want to playback the currently displayed screen later,
you can save the screen data onto the memory (up to 100
images)*
1.
*1The number of the data that can be saved is different according
to the image.
Press Capture button.
The currently displayed screen is saved, and is added at the
end of the already-saved images.
Displaying Saved Images
Menu Button
1Press Menu button.
2Select [General] - [OfflineView], then
select [OK].
The saved image...

39
E
No display after
powering on
An afterimage appears
“Connection timeout” is
displayed
“No server found” is
displayed
“Authentication failed” is
displayed
“Too many clients” is
displayed
Troubleshooting
Has the computer or wireless display been set to the
power-saving mode?
To resume operation of your computer from the
condition the power of the display is off (for energy
conservation purposes), touch the screen.
If an image is displayed for a prolonged period of time,
an afterimage may appear.  Set...

40
E
“Illegal data received” or
“Initial image receiving
timeout” is displayed
“PC’s display mode
changed” is displayed
Software keyboard has
been closed
An afterimage appears
(i.e., green, red, and blue
dots remain on the
display) or there are dots
not displaying the correct
colors
Confirm whether the network is working properly or
not.
Confirm the AES key length setting with the following
procedure.

Windows XP
[start] - [All Programs] - [Panasonic] - [MeiWDS Setup
Utility]
Windows 2000
[Start] -...