Panasonic Cf Vdw07bh Owners Manual

							21
E
Shutting Down
1Display the shut down screen.
Windows XP
After saving important data and closing each application, select [Turn Off Com-
puter] from [start].
Windows 2000
After saving important data and closing each application, select [Shut Down] from [Start].
2Confirm shut down.
Windows XP
Select [Turn Off].
Windows 2000
Select [OK] after selecting [Shut down].
3When [Windows is shutting down] is displayed, select [Ok].
Your computer and the wireless display will power off automatically.
1Turn on your computer. ( Operating Instructions of the computer)
2
After confirming the “DISPLAY
READY” indicator has lit, turn
on the wireless display.

After  has been displayed on
the taskbar, turn on the wireless
display.
Press the power switch and hold it down for approximately three seconds until the
power indicator turns on before releasing it.
3Select your application.
Power
Switch
Power
Indicator
When your computer and the wireless display do not power off using the above proce-
dure, “PC in standby” may be displayed though the computer is not in standby mode.
In this case, select [Ok]. The wireless display will power off automatically.
NOTE   
						

							22
E
Touchscreen
The wireless display is equipped with a touchscreen function allowing you to perform the
same operations as the mouse by touching the surface of the display with the stylus.
Moving the cursorClicking
Double-clickingDragging
Touch and hold the object
(i. e. file or icon), move your
stylus on the surface (drag-
ging the object to the de-
sired location), then release
your stylus. Two quick
tapsOne tap
The double-clicking speed can be set in the following procedure.
Windows XP
[start] - [Control Panel] - [Printers and Other Hardware] - [Mouse] - [Buttons]
- [Double-click Speed]
Windows 2000
[Start] - [Settings] - [Control Panel] - [Mouse] - [Buttons] - [Double-click
Speed]
Cursor
NOTE 
						

							23
EThe touchscreen function can not be used in the MS-DOS mode and when using
the full screen in [Command Prompt].
Handling the Touchscreen
Use the stylus included with the wireless display. Do not use an implement other
than the stylus that comes with the wireless display.
Do not place any object on the surface or press down forcefully with sharp-pointed
objects (e.g., nails), or hard objects that can leave marks (e.g., pencils and ball
point pens).
Do not operate the computer when such things as dust are on the screen.  Do not
allow substances such as oil to contact the LCD.  The cursor may not work prop-
erly in such cases.
When the touchscreen becomes dirty:
Wipe lightly to remove dirty areas by using a dry soft cloth (included).
Do not use benzene or thinner, or disinfectant-type alcohol.
(For more information, refer to “Suggestions About Cleaning the LCD Surface”
that comes with the soft cloth.)
Handling the Stylus
Clean the stylus tip and screen prior to operation.  Foreign particles can scratch the
screen and impede the operation of the stylus.
Use the accessory stylus only on the wireless display screen. Using it for any other
purpose may damage the stylus and scratch the screen.
Do not use pencils, implements with sharp tips or hard objects for screen opera-
tions.  The screen may be damaged as a result.
CAUTION
Right-Clicking
Press R-button.12
When “R”  is
displayed on
the right-
lower corner
RR-Button
One tap
NOTE
If the R-button is pressed again when setting right-clicking function to be enabled,
the right-clicking function will be set to be disabled. 
						

							24
E
Calibration
Run the calibration setup when the cursor and the stylus touches do not appear to agree.
1Press Menu button.
2Select [Option].
3Select [Calibration].
Touch the five “×” marks on the calibration screen.
Menu Button12××
××
34
×
5
Touchscreen 
						

							25
E
Software Keyboard
When selecting [ Software Keyboard] on the taskbar or when the character input box of an
application is selected, the software keyboard shown below automatically starts up, and char-
acters can be input by using the software keyboard.
We recommend leaving the software keyboard as an icon instead of closing the software key-
board when it is not being used. The software keyboard will no longer start up automatically if
 is selected to close the keyboard. In this case, it can be restarted in the following procedure.
Windows XP
[start] - [All Programs] - [Panasonic] - [Software Keyboard]
Windows 2000
[Start] - [Programs] - [Panasonic] - [Software Keyboard]
The action is the same as a right mouse
button click.
(The same function as      .) One tap : Use as the short cut key.
Two quick taps : The same function as       .The software keyboard
will be moved to the
four corners of the
screen.
The system menu is dis-
played.
(
 page 26)
If you want to press short cut key, after pressing one key, press the second key in a
continuous manner. For example, if you want to type    Ctrl   +   C   , after pressing
Ctrl   , press   C    .
If a keyboard is connected to the computer, all operations on the keyboard are not
reflected on the software keyboard.
When using two or more keys in combination (  Ctrl   +   C   etc.), use the internal
keyboard or the software keyboard alone.
Ctrl   +   Alt   +   Del   cannot be input through the software keyboard. (Except when
logging on).
Characters cannot be input through the software keyboard in the MS-DOS mode.
For some applications, the software keyboard remains as an icon even when the charac-
ter input box is selected.  In this case, select [
 Software Keyboard] on the taskbar.
If you want to use the keyboard for a non-text-input application (e.g., Windows ex-
plorer), first display the software keyboard and then select the application. Following
these steps, you can use the keys of the software keyboard.
Before shutting down and then restarting Windows, be sure to save all data. If an
attempt is made to shut down the computer while data is being edited, a message will
appear asking whether to save the current data or not. In such cases, return to Win-
dows, save all data, and then shut down the computer.
NOTE         
						

							26
E
Software Keyboard
Changing the Settings
You can change the keyboard size, switch the keyboard to the numeric keypad, or change
other settings using the system menu.
1Select  (on the top left corner of the software keyboard).
2Add a check mark to the function you want to use.
The software keyboard moves automatically so as not to hide
the window currently selected. (It will not move if there is
no place that it can move to.)  Also, the software keyboard
will move to the topmost position on the display when the
computer changes to input mode.
If the software keyboard has been minimized on the taskbar,
it will automatically be restored and will move to the top-
most position on the display when the computer changes to
input mode.  Depending on the application, this function
may not work.
Select the keyboard/keypad. Set the software keyboard to the topmost position on the
display.
Set the software keyboard to transparent display.
NOTE
The currency symbols displayed on the numeric key-
pad are set using the following menu.
Windows XP: [start] - [Control Panel] - [Date, Time,
Language, and Regional Options] -
[Regional and Language Options] -
[Regional Options] - [Customize] -
[Currency] - [Currency symbol]
Windows 2000: [Start] - [Settings] - [Control Panel] -
[Regional Options] - [Currency] -
[Currency symbol]       
						

							27
E
Battery Power
Battery Status
Battery Status
Charging
Fully-charged
Battery charge is low (the charge is less than approx. 9%
capacity)
Battery pack or charger may not be working properly.
Quickly remove the battery pack and disconnect the AC
adaptor, then connect them again. If the problem persists,
contact Panasonic Technical Support.
 Unable to recharge due to violation of temperature limits.
(The ambient temperature is outside the allowable range. Once
the allowable range requirement is satisfied, charging begins
automatically.)
Battery is discharging to prescribed charging level in high
temperature mode.
Battery pack is not connected or charging not being performed.
*1 When the AC adaptor is connected.
Use the Battery Indicator to Check on the Battery Status
NOTE
Battery Indicator
Orange*1
Green*1
Red
Blinking red*1
Blinking orange*1
Blinking green
Not lit
This wireless display prevents overcharging of the battery by recharging only when
the remaining power is less than approx. 95% of capacity after the battery is fully
charged. 
						

							28
E
Battery Power
Getting a detailed reading
1Press Menu button.
2Select [Battery]. ( page 32)
• The battery indicator light remains red.
• The battery remaining displays 99% and the
indicator light is orange for a long period of
time.
• Low battery warning appears after a short pe-
riod of time.
Perform the “Refresh
Battery” utility.
(
 page 32)
The actual remaining battery capacity and the displayed indication may differ.
Menu Button
NOTE 
						

							29
E
Replacing the Battery Pack
When the charge provided by your battery pack is supplied for only a short period of
time, even after fully charging according to the instructions, it may be time to replace
your battery pack.  The battery pack is a consumable item and therefore will require
replacement (CF-VZSU
21).
Do not touch the terminals on the battery pack. The battery pack may no longer
function properly if the contacts are dirty or damaged.
The battery pack is not charged when the wireless display is first purchased.  Be
sure to charge it before using it for the first time.  When the AC adaptor is con-
nected to the wireless display, charging begins automatically.
Use only the specified battery pack (CF-VZSU21) with your wireless display.
Be sure the power has been turned off before proceeding.
1Power off your wireless display.  ( page 21)
Replace the battery pack with another one while the AC adaptor is connected,
and do not disconnect the AC adaptor until the new battery has been fully
charged. Image data saved on the wireless display may be lost.
2Taking out the battery pack
1Slide the latch.
2Open the cover.
3Pull the tab on the battery pack and remove it
from the wireless display.
3
CAUTION
CAUTION
1
2 
						

							30
E
Inserting a battery pack
1Firmly attach the battery pack to the connector.
Be sure to insert the battery pack as illus-
trated.
Be sure to the battery pack is properly con-
nected to the connector.
2Close the cover.
3Slide the latch to the left.
CAUTION
For an improperly attached cover, your battery pack may fall out while you
are carrying around your wireless display.
Be sure the tab does not get caught when closing the cover.
Ta b
Connector
Charging the Battery Pack
Connect the wireless display to a power outlet.
Charging begins automatically.
CAUTION
Battery Power
2
1
3