Panasonic Cf 72vcjuzqm Owners Manual

11
Getting Started
8Setup Windows
Moving the cursor () or clicking buttons can be performed with the touch pad ( page
17).
7Select the Operating System
Windows 2000 and Windows XP are preinstalled on this computer. After one of them is
selected with the following procedure, only that Operating System can be used.
1
At the screen for the agreement of the selection of the Operating System, press   Y   .
2With the number keys, select either Windows 2000 or Windows XP.
(The selection of the Operating System...

12
Getting Started
Windows XP
You can select Classic view for the Control Panel or select the Classic Start menu.  You
can also change the way a user logs on or off.
The procedure in this manual uses the method or view of the Windows XP default
setting (not  Classic view or Classic Start menu etc.).

Windows XP has a function to reset a forgotten password.
To use this function, you need to create a password reset disk beforehand following the
steps below.
1Select [Control Panel] - [User Accounts] and...

13
Getting Started
When [You do not need to make “BACKUP DISK”] is displayed (procedure  5  below),
there is no need to create a BACKUP DISK.  If this message is not displayed, create
backup disks for reinstallation.  To create backup disks, the floppy disk drive and format-
ted 2HD floppy disks are needed.
Eject Button
Label-side up
Insert the shutter-side
headfirst. Turn your computer off.
Set the floppy disk drive in the multimedia pocket. (
 “Multimedia Pocket”)
1
2
4Make sure a disk is not in the...

14
Operation
1Open the display
Slide the latch as shown and lift open the display.
Starting Up/Shutting Down
Starting Up
2Turn your computer on
Slide the power switch toward the rear of the computer and hold it for approximately one
second until the power indicator turns on before releasing it.
After confirming that the power indicator has turned on, avoid the following until
Windows has completed loading.
• Connecting or disconnecting the AC adaptor.
• Touching the power switch.
• Performing any...

15
Operation
3
Input your password
Wait for 10 seconds after confirming that the hard disk access has been completed, and
input the user name and password, then select [OK].  Until the correct user name and
password are entered, the computer will not operate.
Windows XP
Select User (only necessary when multiple accounts are created)
Wait for 10 seconds after confirming that the hard disk access has been completed, then
select the user.
4Select your application
You are able to start working on your...

16
Operation
Shutting Down (power off your computer)
This procedure is shutting down without using the standby or hibernation function.
(
  “Standby/Hibernation Functions”)
Starting Up/Shutting Down
From the keyboard,
You may choose to press down on        , then select the menu with      or     .
Restarting your computer (without shutting down)
Windows 2000
Select [Restart], then select [OK].
Windows XP
Select [Restart].
3Confirm shut down
Windows 2000
Select [Shut down], then select [OK].
Windows XP...

17
Operation
Function
Touch Pad (Basic Operation)
Use the touch pad to move the cursor on the display and perform normal computer operations.
For instructions on how to operate, refer to  
 "Touch Pad (Advanced)".
If a key combination such as   Fn   +   F5   is used while the pad is being touched, the
function of the key combination may not work.  In addition, it is possible that control of the
cursor will be lost and the cursor will not show proper movements.  In such cases, the
computer has to...

18
Operation
Reference Manual
1Turn your computer on
2Windows 2000
Select [Reference Manual] in [Start] - [Programs] - [Panasonic] - [On-Line Manuals]
Windows XP
Select [Reference Manual] in [Start] - [All Programs] - [Panasonic] - [On-Line Manuals]
When the Reference Manual is started up for the first time, the License Agreement of the Acrobat Reader will be displayed. After
reading the agreement, select [Accept] to access the Reference Manual.
Run the Reference Manual
The Reference Manual can be...

19
Troubleshooting
List of Error Codes
The following is a list of the messages that BIOS can display.  Most of them occur during POST.  Some of them display informa-
tion about a hardware device, e.g., the amount of memory installed.  Others may indicate a problem with a device, such as the way
it has been configured.  Following the list are explanations of the messages and remedies for reported problems.
If your system displays one of except the messages marked below with an asterisk (*), write down the...

20
Troubleshooting
02F5:  DMA Test Failed
ServerBIOS2 test error: Cannot write to extended DMA (Direct Memory Access) registers.
02F6:  Software NMI Failed
ServerBIOS2 test error: Cannot generate software NMI (Non-Maskable Interrupt).
02F7:  Fail - Safe Timer NMI Failed
ServerBIOS2 test error: Fail-Safe Timer takes too long.
device address Conflict
Address conflict for specified device.
Allocation Error for: device
Run ISA or EISA Configuration Utility to resolve resource conflict for the specified...