Panasonic Cf 18ndhzxvm Owners Manual

31
Troubleshooting
No display after powering on
The power has not been
turned off, but after a cer-
tain period of time, there is
no display
When the battery pack is
used, the screen is darker
than when the AC adaptor
is connected
The LCD brightness
changes a number of times
when the AC adaptor is dis-
connected
Image colors are not repro-
duced as expected when dis-
playing photographs or
other images
When there is no display to an external display,
• Check your cable connection to the external...

32
Troubleshooting
Dealing with Problems (Summary)
The red indicator lights
The red indicator blinks
The green indicator blinks
The battery indicator blinks
green and orange alternately
The battery level is very low (the charge is approx. 9% or less).
Connect the AC adaptor. You can use the computer when the battery indicator light is
orange. If you do not have an AC adaptor, save your data and power off your computer.
After replacing the battery pack with a fully charged one, turn your computer on....

33
Troubleshooting
The display is not rotated
automatically by switching
from Laptop mode to Tab-
let mode, or vice versa
The display fails to rotate
even when the rotation but-
ton 
 is pressed
When the screensaver starts
while the display is rotated,
nothing is displayed on the
screen
 Display Rotation
Confirm that the default angle of each mode is correctly set. (  “Display Rotation”)
Do not switch from Laptop mode to Tablet mode, or vice versa, while Windows is in the
process of switching users with...

34
Troubleshooting
Dealing with Problems (Summary)
Press   Ctrl   +   Shift   +   Esc    to open Task Manager and close the software application
which is not responding.
Is there an input screen hidden behind another window? Use   Alt   +    Ta b   to check for
other windows being displayed.
After shutting down by sliding the power switch for more than four seconds, slide the
power switch to power on and open the application again.
If the program no longer works normally, delete the program using the...

35
Troubleshooting
9Make a selection from the menu.
When selecting [2], enter the basic partition size for
the operating system installation and press
   Enter   .
(The data partition size is the remainder after subtract-
ing the basic partition size.)
To select [3], the initial partition size must be 8 GB*1
or more of the hard disk size. Reinstallation cannot be
performed with a small partition size.
*1CF-18N******: 14 GB

If you select [1] or [2], the message [The Backup function
has been enabled. If...

36
Troubleshooting
Do not interrupt the reinstallation procedure be-
fore completion, for example by turning off the
computer or pressing
Ctrl   +   Alt   +   Del  , as
this may prevent Windows from starting up, or may
cause data to be lost so that the reinstallation pro-
cedure  cannot be executed.
When a message appears instructing you to insert
the next CD, insert the recovery CD showing the
next number in the sequence, and then select [OK].
If the message [The media does not contain the
correct file]...

37
AppendixAppendix
YOU MAY NOT REVERSE ASSEMBLE, REVERSE COMPILE, OR MECHANICALLY OR ELECTRONICALLY TRACE
THE PROGRAMS, OR ANY COPY THEREOF, IN WHOLE OR IN PART.
YOU MAY NOT USE, COPY, MODIFY, ALTER, OR TRANSFER THE PROGRAMS OR ANY COPY THEREOF, IN
WHOLE OR IN PART, EXCEPT AS EXPRESSLY PROVIDED IN THE LICENSE.
IF YOU TRANSFER POSSESSION OF ANY COPY OF ANY PROGRAM TO  ANOTHER PARTY, EXCEPT AS PERMIT-
TED IN PARAGRAPH E ABOVE, YOUR LICENSE IS AUTOMATICALLY TERMINATED.
This license is effective only for so...

38
Appendix
A. MEI vous octroie par les présentes le droit et la licence personnels, non cessibles et non exclusifs dutiliser les
Logiciels conformément aux termes, clauses et conditions de ce Contrat. Vous reconnaissez ne recevoir quun
droit limité dutiliser les Logiciels et la documentation les accompagnant et vous vous engagez à nobtenir aucun
droit de titre, propriété ni aucun autre droit vis-à-vis des Logiciels et de la documentation les accompagnant ni vis-
à-vis des algorithmes, concepts, dessins,...

39
AppendixAppendix
Hard Disk Backup Function
The hard disk backup function creates a backup area (storage area) on the hard disk. This area is to back up (store) hard disk
contents or restore backed up contents to their original locations.
By backing up the data on your hard disk to a backup area, you can protect your data from loss or damage resulting from operational
errors or other factors.  Also, you can back up or restore hard disk contents using this computer alone, without having to use other...

40
Appendix
Hard Disk Backup Function
1Turn off the computer and connect the CD/DVD drive to the USB port.
2Turn on the computer, and press   F2   while [Panasonic] boot screen is displayed.
The Setup Utility will start up.
If a password has been set, enter the Supervisor Password. You cannot register [Boot] menu
with a User Password.
3Select [Boot] menu, then select [USB CDD] and press    F6    until [USB CDD] is at the top of
the [Boot] menu.
4Place disc number one of the recovery CDs into the CD/DVD...