Home > Panasonic > Personal Computer > Panasonic Cf 18kdh77vm Owners Manual

Panasonic Cf 18kdh77vm Owners Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Panasonic Cf 18kdh77vm Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							41
    AppendixAppendix
    9At the confirmation message, press    Y   .
    The backup area is then created.
    10When the message [You must reboot in order to enable the Backup function] appears, remove
    the recovery CD, and press any key to restart the computer. The computer is restarted, then the
    backup process will begin.
    11 When the message [[Backup] is complete] appears, press    Ctrl   +   Alt   +   Del    to restart
    the computer.
    Do not press   Ctrl   +   Alt   +   Del   until the message is displayed.
    CAUTION
    The [Boot] menu in the Setup Utility is set to start up from the CD/DVD drive. Change this
    setting if necessary.
    The next time the backup or restore functions are executed, follow the procedure for “Backing
    Up and Restoring Data” (
     below).
    NOTE
    1Turn the computer on, and press   F2   while [Panasonic] boot screen is displayed.
    The Setup Utility will start up.
    If a password has been set, enter the Supervisor Password or the User Password.
    2Select [Exit] menu, then select [Hard Disk Backup / Restore] and press çEnter   .
    At the confirmation message, select [Yes] and press  çEnter   .
    Backing Up and Restoring Data
    Before executing the backup function, execute a disk error check. ( page 39)
    Do not interrupt the backup or restore functions before completion, for example by turning
    off the power or pressing   Ctrl   +   Alt   +   Del  , as this may prevent Windows from
    starting up, or may cause data to be lost so that the backup and restore functions cannot be
    executed.
    CAUTION
    12After logging on to Windows, a message will appear advising that a new device has been in-
    stalled and that the computer must be restarted to enable the settings.  Select [Yes] to restart the
    computer. 
    Select [2], enter the partition size (GB), and press   Enter   .
    • You can cancel this operation by pressing    0   .
    • The data partition size will be the maximum settable size less the number entered above.
    The maximum settable size will differ depending on models.
    The usable hard disk area [At the time of purchase]
    [After the backup area is created]
    The backup area
    Cannot be accessed
    from Windows.Can be accessed from
    Windows (Two partitions). 
    						
    							42
    Appendix
    To disable the hard disk backup function
    Perform the reinstallation procedure. All data in the backup area and the hard disk will be erased.
    Conduct steps 
    1-8 for “Reinstalling Software” ( page 35). Select [1] or [2] to execute the
    reinstallation at the screen for executing the reinstallation.
    • When [1] is selected, the hard disk backup function will be disabled.
    • When [2] is selected, the hard disk backup function will be disabled, but in this case, because
    the hard disk has been divided into partitions, the hard disk backup function cannot be
    re-enabled (
     page 28).
    • When [3] is selected, the hard disk backup function cannot be disabled.
    CAUTION
    When the hard disk backup function has been enabled, the backed up data will not be erased
    even if a commercial data erasing utility or similar software is used to erase all data from user-
    accessible area. To erase all data on the hard disk, including backed up data, use a commercial
    data erasing utility after disabling the hard disk backup function following the procedure be-
    low, or use the hard disk data erase utility included in this computer (
     page 43).
    Occasionally, the message [#1805 cannot write image file] will be displayed, and the backup
    function will be interrupted.  If this error occurs, execute the backup function again.  After
    this, if the backup function is completed properly, then there is no problem in the hard disk.
    4When the message [[Backup] is complete] or [[Restore] is complete] is displayed, press
    çCtrlçç
    ò òò ò
    òçAltçç
    ò òò ò
    òççDel ç to restart the computer.
    • If the backup or restore process was interrupted before completion, for example if the power
    was turned off, execute the process again.
    • After logging on to Windows, when a new device is installed and a message appears advising
    that the computer must be restarted to enable the settings, select [Yes] to restart the computer.
    3Select the operation to be executed from the menu.
    
    1  Press ç1ççto execute [1. [Backup]].
    (When dividing the hard disk into two partitions, select the backup method at next screen.)
    2
    At the confirmation message, press   Y   .
    The backup process will begin.
    
    1  Press ç2ççto execute [2. [Restore]].
    (When data is backed up in two partitions, select the restore method at next screen.)
    2
    At the confirmation message, press   Y   .
    The restore process will begin.
    The time required to complete the backup or restore process differs depending on the
    data volume.
    NOTE
    Hard Disk Backup Function 
    						
    							43
    AppendixAppendix
    Hard Disk Data Erase Utility
    1Turn off the computer and connect the CD/DVD drive to the
    USB port.
    2Turn the computer on, and press   F2   while [Panasonic]
    boot screen is displayed.
    The Setup Utility will start up.
    If the password has been set, enter the Supervisor Password.
    3Select [Boot] menu, then select [USB CDD] and press   F6
    until [USB CDD] is at the top of the [Boot] menu.
    4Place disc number one of the recovery CDs into the CD/
    DVD drive.
    5Press    F10   .  At the confirmation message, select [Yes]
    and press   Enter    .
    The computer will restart, and this screen should appear. This computer is equipped with a utility for erasing hard disk data.
    When disposing of or transferring ownership of this device, erase all data on the hard disk in order to prevent the theft of hard disk
    data by following the steps below.
    The hard disk data erase utility erases data using an “overwriting” method, but there is a possibility that due to malfunctions or
    other operational errors, data may not be completely erased. There are also specialized devices that may be able to read data that
    has been erased using this method. If you need to erase highly confidential data, we recommend that you contact a company that
    specializes in this process. Matsushita Electric Industrial Co., Ltd. will bear no responsibility for losses or damages suffered as
    a result of the use of this utility.
    NOTE
    Be sure the AC adaptor is connected until the procedure is completed.
    This utility can only be used for internal hard disk.  It cannot be used to erase data from external hard disks.
    This utility cannot erase data from damaged disk.
    This utility cannot erase data for specific partitions.
    After executing this utility, the computer cannot be booted from the hard disk.
    The backup area and the data in the backup area will be erased.
    Product Recovery CD-ROM (included)
    Panasonic USB CD/DVD drive (optional:  USB CD/DVD drive (optional:  CF-VDRRT1M, CF-VDRRT2W or CF-VDRRT3W)
    6Press   2    to execute [2. [Erase HDD]].
    (You can cancel this operation by pressing   0   .)
    
    When the message [The Backup function has been enabled.
    If [Erase HDD] is executed, the Backup function will be
    disabled, and your Backup data will be lost.] appears, press
      Y   .
    When the message [Computer must be rebooted in order to
    execute [Erase HDD].] appears, press
    R   .
    7At the confirmation message, press   Y   .
    8When [] is displayed, press   Enter   .
    9The approximate time required for erasing data will be dis-
    played.
    Press   Space   .
    10At the confirmation message, press   Enter   .
    The operation of erasing the hard disk will start.
    (If necessary, the “hard disk data erase” operation can be
    cancelled after it has begun by pressing   Ctrl    +    C    .
    If the operation is cancelled before being completed, a part
    of the data will not be erased.)
    11After the operation is complete:
    Under normal conditions, the message [Hard disk data has
    been deleted.] will be displayed.
    If a problem occurred during the operation, an error message
    will be displayed.
    12Remove the recovery CD, and then press any key to turn off
    the computer.
    13Remove the CD/DVD drive.
    Preparing
    Procedure
    
    When the message [The Backup function has been enabled.
    If [Recovery] or [Erase HDD] is executed, the Backup func-
    tion will be disabled, and your Backup data will be lost.]
    appears, press
    Y   .
    ---------------------------------------------------------------------Select a number---------------------------------------------------------------------1. [ Recovery ] Reinstall Windows.
    2. [ Erase HDD ] Erase the whole data on HDD for security.
    3. [ Backup ] Enable the Backup function.
    0. [ Cancel ] Cancel.
    --------------------------------------------------------------------- 
    						
    							44
    Appendix
    Specifications
    CF-18KDHZXVM CF-18KDHZBVM
    Intel® Pentium® M Processor 753 (1.2  GHz, 2 MB *1 L2 cache, 400  MHz FSB)
    512 MB*1 (1536  MB*1 Max.)
    UMA (128  MB*1 Max.)*2
    10.4 type (TFT)
    65,536/16,777,216 colors (800 x 600 dots/1024 x 768 dots)
    65,536/ 16,777,216  colors (800 x 600 dots/1024 x 768 dots/ 1280 x 768 dots/1280 x
    1024 dots)*4
    60  GB*5
    Windows keyboard (82 keys)
    Touch Pad
    Digitizer (Anti-Reflection)
    Two Type  I or Type  II, or one Type  III
    3.3 V: 400  mA, 5 V: 400  mA
    200-pin, 1.8  V,  SO-DIMM, DDR2-SDRAM, PC2-3200 Compliant
    SD Memory Card
    Miniature jack, 3.5 DIA
    Miniature jack, 3.5 DIA
    4-pin x 2, USB2.0
    RJ-11 Data: 56  kbps (V.92 & K56flex*9)  FAX: 14.4  kbps
    RJ 45 IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX
    Built-in Intel® PRO/Wireless 2915 ABG ( page 45)
    Built-in ( page 45)
    Dedicated 100-pin female
    Mini Dsub 15-pin female
    Dedicated 50  Ω coaxial connector x 2
    WAVE and MIDI playback, Monaural Speaker (built in)
    Li-ion 7.4  V, 7.65  Ah
    Approx. 4.5 hours - 8.5 hours*11 (Approx. 6.5 hours*12)
    Approx. 7 hours
    Approx. 4 hours
    Coin type lithium battery 3.0  V
    Input: 100 V - 240  V AC, 50  Hz / 60  Hz Output: 16.0  V DC, 2.5  A
    Approx. 26  W*15 / Approx. 40  W (maximum when recharging in the ON state)
    5 °C  to 35  °C  {41  °F to 95  °F}
    30 % to 80 % RH   (No condensation)
    -20  °C to 60  °C  {-4  °F to 140  °F}
    30 % to 90 % RH   (No condensation)
    271  mm X 49  mm X 216  mm {10.7  X 1.93  X 8.5 }
    Approx. 2.1  kg {Approx. 4.5  lb.}
    Model No.
    CPU
    Memory
    Video Memory
    LCD Type
    Displayed Colors*3
    External Display
    Hard Disk Drive
    Keyboard
    Pointing Device
    PC Card Slot
    Allowable current (total for two slots)
    RAM Module Slot*6
    SD Memory Card Slot*7
    Microphone Jack*8
    Interface Headphone Jack
    USB Port
    Modem
    LAN
    Wireless LAN
    Bluetooth®
    Expansion Bus Connector
    External Display Port
    External Antenna Connector
    Sound
    Battery Pack
    Operating Time*10
    Charging Time*10Power On
    Power Off
    Clock Battery
    AC Adaptor*13
    Power Consumption*14
    EnvironmentOperation T emperature
    Humidity
    StorageTemperature
    Humidity
    Physical Dimensions*16 (W X H X D)
    Weight*16
    Main Specifications
    This page provides the specifications for the basic model CF-18KDHZXVM/C\
    F-18KDHZBVM. The model number will change
    depending on the configuration of the unit, such as, CPU speed, memory s\
    ize, HDD size, Operating System, LCD type, and whether
    a wireless LAN or Bluetooth
    ® is built in or not.
    To check the model number:
    Check the bottom of the computer or the box the computer came in at the \
    time of purchase.
    To check CPU speed, memory size and the hard disk drive (HDD) size:
    Run the Setup Utility (
      “Setup Utility”).
    Confirm the required information by checking the following items.
    • [Information] menu CPU speed: [CPU Speed]           Memory size: [System Memory]           \
    Hard disk drive size: [Primary Master]
    • [Advanced] menu Wireless LAN: [Wireless LAN] is displayed only if a wireless LAN is built in. 
    						
    							45
    AppendixAppendix
    Microsoft® Windows® XP Tablet PC Edition 2005
    Software
    Operating System
    Utility Programs
    Data transfer rates*17
    Standards supported
    Transmission method
    Wireless channels used
    RF frequency bandIEEE802.11a: 54/48/36/24/18/12/9/6 Mbps (automatically switched)
    IEEE802.11b: 11/5.5/2/1 Mbps (automatically switched)
    IEEE802.11g: 54/48/36/24/18/12/9/6 Mbps (automatically switched)
    IEEE802.11a/IEEE802.11b/IEEE802.11g
    OFDM system, DS-SS system
    IEEE802.11a: Channels 36/40/44/48/52/56/60/64/149/153/157/161/165
    IEEE802.11b/IEEE802.11g: Channels 1 to 11
    IEEE802.11a: 5.18~5.32 GHz, 5.745~5.825 GHz
    IEEE802.11b/IEEE802.11g: 2412~2462 MHz
    Wireless LAN (only for models with wireless LAN)
    *11 MB = 1,048,576 bytes
    *2A segment of the main memory is allotted automatically depending on the computer’s operating status.  The size of the Video Memory cannot
    be set by the user.
    *
    3A 16,777,216 color display is achieved by using the dithering function.
    *4Maximum resolution depends on the specifications of the external display.
    *51GB = 1,000,000,000 bytes.  Your operating system or some application software will report as fewer GB.
    *6A PC2-3200-compliant or PC2-4200-compliant RAM module can be added. A PC2-4200-compliant RAM module added to this computer,
    operates at the same speed as a PC2-3200-compliant RAM module.
    *
    7This slot does not support the MultiMedia card.
    Operation has been confirmed for Panasonic SD Memory Cards with up to 1 GB capacity.
    *
    8Use only a monaural condenser microphone.
    *9The settings for the K56flex modem need to be changed according to the AT command.
    *10Varies depending on the usage conditions, CPU speed, etc.
    *11Measured using BatteryMarkTM Version 4.0.1 (LCD brightness: Maximum - Minimum)
    *12Measured using MobileMarkTM 2002 (LCD brightness: 60 cd/m2)
    *13
    The AC adaptor is compatible with power sources up to 240 V AC adaptor.  The computer is supplied with a 125 V AC compatible AC cord.
    *
    14Approx. 1.0 W when the battery pack is fully charged (or not being charged) and the computer is off.
    Approx. 1.5 W when the Wake up from LAN function has been enabled.
    *
    15Rated power consumption.
    *16The dimensions and weight do not include the hand strap.
    *
    17These are speeds specified in IEEE802.11a+b+g standards. Actual speeds may differ.
    *
    18 Only for models with wireless LAN.
    *19 The Product Recovery CD-ROM is required.
    *20 Only for models with wireless LAN and/or Bluetooth.
    *21 Only for models with Bluetooth.
    Setup Utility
    DMI Viewer
    Microsoft
    ® Windows® Media Player 10
    Adobe Reader
    Intel
    ® PROSet/Wireless Software*18
    Display Rotation Tool
    PC Information Viewer
    Hard Disk Backup Utility*
    19
    Hard Disk Data Erase Utility*19
    SD Utility
    Icon Enlarger
    Loupe Utility
    Hotkey Settings
    Battery Recalibration Utility
    Wireless LAN Switch*
    18
    Wireless Switch Utility*20
    Bluetooth Switch*21
    1.2
    FHSS system
    Channels 1 to 79
    2.402-2.48 GHz
    Bluetooth®
    Bluetooth Version
    Transmission Method
    Wireless Channels Used
    RF Frequency Band 
    						
    							46
    Appendix
    LIMITED WARRANTY
    PANASONIC PERSONAL COMPUTER AND PERIPHERALS LIMITED WARRANTY
    Panasonic Computer Solutions Company (referred to as “Panasonic”) will repair this product (other than software, which is covered by a separate
    warranty) with new or rebuilt parts, free of charge in the U.S.A. for three (3) years from the date of original purchase in the event of a defect in
    materials or workmanship. This warranty includes the AC adaptor but excludes the batteries and all other options and accessories which are
    covered for a period of one (1) year from the date of purchase.
    This warranty is extended solely to the original purchaser. A purchase receipt or other proof of date of original purchase will be required before
    warranty performance is rendered.
    This warranty only covers failures due to defects in materials or workmanship which occur during normal use. It does not cover damage which occurs
    in shipment or failures which are caused by products not supplied by Panasonic, or failures which result from alteration, accident, misuse, introduction
    of liquid or other foreign matter into the unit, abuse, neglect, installation, maladjustment of consumer controls, improper maintenance, modification or
    service by anyone other than a Factory Service Center or authorized Panasonic Service Dealer, or damage that is attributable to acts of God.
    Limits and Exclusions:
    There are no other express warranties except as listed below.
    PANASONIC SHALL NOT BE LIABLE FOR LOSS OF DATA OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE
    USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING
    THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE APPLICABLE WARRANTY
    PERIOD SET FORTH ABOVE. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how
    long an implied warranty lasts, so the above limitations or exclusions may not apply to you.
    This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state. If a problem with your product
    develops during or after the warranty period, you may contact our representatives at 1-800-LAPTOP5. If the problem is not handled to your
    satisfaction, then write to the Consumer Affairs Division at the address indicated below.
    SOFTWARE LIMITED WARRANTY
    Panasonic Computer Solutions Company (referred to as “Panasonic”) warrants to you only that the disk(s) or other media on which the Programs are
    furnished will be free from defects in materials and workmanship under normal use for a period of sixty (60) days from the date of delivery thereof
    to you, as evidenced by your purchase receipt.
    This is the only warranty Panasonic makes to you. Panasonic does not warrant that the functions contained in the Programs will meet your
    requirements or that the operation of the Programs will be uninterrupted or error free.
    Panasonic’s entire liability, and your exclusive remedy under this warranty shall be limited to the replacement, in the United States, of any defective
    disk or other media which is returned to Panasonic’s Authorized Service Center, together with a copy of the purchase receipt, within the aforesaid
    warranty period.
    Anything in the foregoing to the contrary notwithstanding, Panasonic shall have no obligation for any defects in the disk(s) or other media on which
    the Programs are furnished resulting from your storage thereof, or for defects that have been caused by operation of the disk(s) or other media
    otherwise than on the Product or in environmental conditions other than those specified by Panasonic by alteration, accident, misuse, abuse,
    neglect, mishandling, misapplication, installation, maladjustment of consumer controls, improper maintenance, modification of damage that is
    attributable to acts of God. In addition, Panasonic shall have no obligation for any defects in the disk(s) or other media if you have modified, or
    attempted to modify any Program.
    DURATION OF IMPLIED WARRANTIES, IF ANY, IS LIMITED TO SIXTY (60) DAYS.
    PANASONIC ASSUMES NO RISK OF AND SHALL NOT IN ANY CASE BE LIABLE FOR ANY DAMAGES, INCLUDING, WITHOUT LIMITATION,
    ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL, OR PUNITIVE DAMAGES ARISING FROM BREACH OF WARRANTY OR CONTRACT, NEG-
    LIGENCE OR ANY OTHER LEGAL THEORY, INCLUDING, WITHOUT LIMITATION LOSS OF GOODWILL, PROFITS OR REVENUE, LOSS OF
    USE OF THE PROGRAMS OR PRODUCTS OR ANY ASSOCIATED EQUIPMENT, COST OF CAPITAL, COST OF ANY SUBSTITUTE EQUIP-
    MENT, FACILITIES, SERVICES, DOWNTIME COSTS, OR CLAIMS OF ANY PARTY DEALING WITH YOU FOR SUCH DAMAGES.
    Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so
    the above limitations or exclusions may not apply to you.
    This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
    This Limited Warranty will be governed by the laws the State of New York, without regard to its conflict-of-laws rules.
    *          *          *
    To obtain service or technical assistance within the continental U.S.A. and Alaska.
    DIAL TOLL FREE: 1-800-LAPTOP5
    Correspondence requesting product information should be sent to:
    Panasonic Computer Solutions Company
    50 Meadowlands Parkway, Panazip 2F-5, Secaucus, NJ 07094
    For U.S.A. 
    						
    							47
    AppendixAppendix
    PANASONIC COMPUTER AND PERIPHERALS LIMITED WARRANTY
    Coverage – Panasonic Canada Inc. (“PCI”) warrants to you, the first end user customer, this computer product (excluding software media), when
    purchased from PCI or from a PCI authorized reseller, to be free from defects in materials and workmanship under normal use, subject to the terms
    set forth below, during the period of warranty coverage specified.
    Remedy – In the event of a warranty claim, contact PCI’s representatives within the applicable warranty period, identifying the nature of the defect
    claimed, at 1-800-668-8386 between 9:00 A.M. and 5:00 P.M., Eastern Time Zone, Mon. – Fri. (excluding holidays) for instructions on how to obtain
    service.  A purchase receipt or other proof of date of original purchase is required before warranty service is performed. Defective parts covered by
    this Limited Warranty will be repaired or replaced with new or comparable rebuilt parts on an exchange basis.  Warranty replacement or repair is
    subject to the terms of this Limited Warranty for the balance of the original period of warranty coverage.
    No Coverage – This Limited Warranty does not cover products purchased outside Canada.  Neither does it cover damage to, failure of, or defects
    in a product or accessory through mishandling, improper installation, abnormal use, misuse, neglect, accident, introduction of liquid or other foreign
    matter into the product, alteration or servicing by anyone not authorized by PCI, or act of God.
    IF YOU  SHIP THE  PRODUCT  FOR WARRANTY  SERVICE
    Carefully pack the product, preferably in the original carton.  Include details of defect claimed and proof of date of original purchase.  No liability
    is assumed for loss or damage to the product while in transit, if you chose your own transportation carrier.
    SOFTWARE MEDIA LIMITED WARRANTY
    Coverage – Panasonic Canada Inc. (“PCI”) warrants to you, the first end user customer, that the disk(s) or other media on which software program(s)
    is/are supplied will be free from defects in materials and workmanship under normal use in Canada for a period of sixty (60) days from date of receipt
    as evidenced by your purchase receipt for your Panasonic Computer product.
    THIS IS THE ONLY WARRANTY THAT PCI MAKES RESPECTING THE SOFTWARE MEDIA.  PCI does not warrant the software.  Please refer to
    the software licensor’s written warranty (accompanying the copy of the software) for any software warranty claim.
    Claim Procedure – In the event of a defect in material or workmanship in the media during the sixty (60) day warranty period, and you return it,
    transportation costs prepaid, to Panasonic Canada Inc., Computer Products Marketing, at the above address, within the warranty period, together
    with a copy of your purchase receipt, and an explanation of the suspected defect, PCI will replace in Canada the defective disk(s) or other media.
    Remedy – PCI’s entire liability, and your only remedy for any breach of this software media warranty is limited to replacement of the media only.  It
    does not cover any other damages, including, but not limited to, loss of use or profit loss, or special, indirect or consequential damages, or other
    claims, whether or not of similar character.
    No Coverage – This limited warranty does not apply if the disk(s) or other media has been used in other than a Panasonic product, or in environmen-
    tal conditions other than those specified by PCI or the manufacturer, or if subjected to misuse, neglect, mishandling, modification or attempted
    modification of the program, or if damaged by accident or act of God.   PCI is not responsible for damage to or loss of any program, data or
    removable storage media.
    GENERAL
    NO OTHER WARRANTIES – PCI DISCLAIMS ALL OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED
    TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT TO THE SOFTWARE,
    SOFTWARE MEDIA, COMPUTER PRODUCT, OPTIONS AND ACCESSORIES.
    NO LIABILITY FOR CONSEQUENTIAL DAMAGES – IN NO EVENT SHALL PCI BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUEN-
    TIAL DAMAGES ARISING FROM ANY BREACH OF THE LIMITED WARRANTIES SET OUT IN THIS DOCUMENT, OR FROM THE USE OF THE
    COMPUTER PRODUCT, INCLUDING, WITHOUT LIMITATION, LOSS OF DATA, BUSINESS, PROFIT OR GOODWILL.
    IN ANY EVENT, PCI’S MAXIMUM LIABILITY FOR ANY BREACH SHALL NOT EXCEED THE AMOUNT ACTUALLY PAID BY YOU FOR THE
    COMPUTER PRODUCT.
    NO ACTION, REGARDLESS OF ITS BASIS, MAY BE BEGUN AGAINST PCI MORE THAN TWO (2) YEARS AFTER THE CAUSE OF ACTION
    AROSE.
    Statutory Warranties – Some jurisdictions do not allow these limitations or exclusions, so they may not apply to you.
    Scope of Coverage
    Whole Product (except Batteries), AC adaptor and CD-ROM
    (if factory installed)
    Batteries,  CD-ROM (unless factory installed), Port Replicator,
    Extra Memory Modules and all other Peripherals, Options and
    AccessoriesPeriod of Coverage
    Three (3) Years from Date of Original
    End User Customer Purchase
    One (1) Year from Date of Original End
    User Customer PurchaseType of Failure Coverage
    Defective Materials or Workmanship
    Defective Materials or Workmanship
    For Canada 
    						
    							Outline of the International ENERGY STA R® Office Equipment Program
    The international 
    ENERGY STA R® Office Equipment Program is an international program
    that promotes energy saving through the use of computers and other office equipment.
    The program backs the development and dissemination of products with fun\
    ctions that
    effectively reduce energy consumption. It is an open system in which business proprietors
    can participate voluntarily. The targeted products are office equipment such as computers,
    displays, printers, facsimiles, and copiers. Their standards and logos are uniform among
    participating nations. As an 
    ENERGY STA R® Partner, 
    Matsushita Electric Industrial Co., Ltd. has
    determined that this product meets the 
    ENERGY STA R® guidelines for energy
    efficiency.
    © 2005 Matsushita Electric Industrial Co., Ltd.  All Rights Reserved.
    Printed in Japan FJ0805-1095
    DFQX5562ZA
    Panasonic Computer Solutions Company
    50 Meadowlands Parkway, Panazip 2F-5,
    Secaucus, NJ 07094
    Panasonic Canada Inc.
    5770 Ambler Drive Mississauga,
    Ontario L4W 2T3   
    						
    All Panasonic manuals Comments (0)

    Related Manuals for Panasonic Cf 18kdh77vm Owners Manual