Panasonic Cf 18ddazxmm Owners Manual

31
Troubleshooting
The red indicator lights
The red indicator blinks
The orange indicator blinks
The green indicator blinks
The battery indicator blinks
green and orange alternately
The battery level is very low (the charge is approx. 9% or less).
Connect the AC adaptor. You can use the computer when the battery indicator light is
orange. If you do not have an AC adaptor, save your data and power off your computer.
After replacing the battery pack with a fully charged one, turn your computer on.
Quickly...

32
Troubleshooting
Some applications may not
work properlyWhen switching to a different user with the Fast User Switching function, the following
problems may occur.
 Some applications may not work properly.
 Key combinations with the Fn key may not work.
 It may not be possible to set the settings of the display.
 Wireless LAN may not work.
In this case, log off all users without using Fast User Switching function, and try the
operation once more. If the problem persists, restart the computer.
 Fast...

33
Troubleshooting
Press   Ctrl   +   Shift   +   Esc   to open Task Manager and close the software application
which is not responding.
After shutting down by sliding the power switch for more than four seconds, slide the
power switch to power on and open the application again.
If the program no longer works normally, delete the program using the following menu.
Then reinstall the program.
[start] - [Control Panel] - [Add or Remove Programs]
Some video files use a Codec that is not installed as a...

34
Troubleshooting
9Make a selection from the menu.
When selecting [2], enter the basic partition size for
the operating system installation and press
   Enter   .
(The data partition size is the remainder after subtract-
ing the basic partition size.)
To select [3], the initial partition size must be 6 GB or
more of the hard disk size. Reinstallation cannot be
performed with a small partition size.

If you select [1] or [2], the message [The Backup func-
tion has been enabled. If [Recovery] is executed,...

35
Troubleshooting
Do not interrupt the reinstallation procedure be-
fore completion, for example by turning off the
computer or pressing
Ctrl   +   Alt   +   Del  , as
this may prevent Windows from starting up, or may
cause data to be lost so that the reinstallation pro-
cedure  cannot be executed.
When a message appears instructing you to insert
the next CD, insert the recovery CD showing the
next number in the sequence, and then select [OK].
If the message [The media does not contain the
correct file]...

36
Appendix
YOU MAY NOT REVERSE ASSEMBLE, REVERSE COMPILE, OR MECHANICALLY OR ELECTRONICALLY TRACE
THE PROGRAMS, OR ANY COPY THEREOF,  IN WHOLE OR IN PART.
YOU MAY NOT USE, COPY, MODIFY, ALTER, OR TRANSFER THE PROGRAMS OR ANY COPY THEREOF, IN
WHOLE OR IN PART, EXCEPT AS EXPRESSLY PROVIDED IN THE LICENSE.
IF YOU TRANSFER POSSESSION OF ANY COPY OF ANY PROGRAM TO  ANOTHER PARTY, EXCEPT AS PERMIT-
TED IN PARAGRAPH E ABOVE, YOUR LICENSE IS AUTOMATICALLY TERMINATED.
This license is effective only for so long...

37
AppendixAppendix
A. MEI vous octroie par les présentes le droit et la licence personnels, non cessibles et non exclusifs dutiliser les
Logiciels conformément aux termes, clauses et conditions de ce Contrat. Vous reconnaissez ne recevoir quun
droit limité dutiliser les Logiciels et la documentation les accompagnant et vous vous engagez à nobtenir aucun
droit de titre, propriété ni aucun autre droit vis-à-vis des Logiciels et de la documentation les accompagnant ni
vis-à-vis des algorithmes, concepts,...

38
Appendix
Hard Disk Backup Function
The hard disk backup function creates a backup area (storage area) on the hard disk. This area is to back up (store) hard disk
contents or restore backed up contents to their original locations.
By backing up the data on your hard disk to a backup area, you can protect your data from loss or damage resulting from opera-
tional errors or other factors.  Also, you can back up or restore hard disk contents using this computer alone, without having to use
other media or...

39
AppendixAppendix
1Turn off the computer and connect the CD/DVD drive to the USB port.
2Turn on the computer, and press   F2   while [Panasonic] boot screen is displayed.
The Setup Utility will then start.
If a password has been set, enter the Supervisor Password. You cannot register [Boot] menu
with a User Password.
3Select [Boot] menu, then select [USB CD/DVD Drive] and press    F6    until [USB CD/DVD
Drive] is at the top of the [Boot] menu.
4Place disc number one of the recovery CDs into the CD/DVD...

40
Appendix
9When the confirmation message is displayed, press    Y   .
The backup area is then created.
10When the message [You must reboot in order to enable the Backup function] appears, remove
the recovery CD, and press any key to restart the computer. The computer is restarted, then the
backup process will begin.
11 When the message [[Backup] is complete] appears, press   Ctrl   +   Alt   +   Del    to restart
the computer.
Do not press   Ctrl   +   Alt   +   Del   until the message is displayed....