Panasonic Cf 18 Cf 29 Cf 73 Series Supplementary Instructions

							11
Removing a SIM card
Push the card.
It will come out of the slot a little bit.
Pull the card all the way out. 
 
						

							12
CF-73 Series
Installing/Removing a SIM Card
1Power off your computer and EDGE
modem.
2Installing a SIM card
Set the SIM card into the socket with the contact
facing upward.
Turn the socket over.
Insert the socket to the SIM card slot.
Removing a SIM card
Push the button with a pointed object (e.g., the tip
of a ballpoint pen).
Remove the socket.
Remove the SIM card from the socket.
CAUTION
Do not insert the SIM card upside down.
SIM Card
Socket
Contact 
						

							13
A CD-ROM drive is necessary for the installation.
CAUTION

When using the internal modem, change the COM port with the following procedure
before installation.
1Select [start] - [Control Panel] - [Performance and Maintenance] - [System] - [Hard-
ware] - [Device Manager] - [Modems] - [Panasonic V.92 MDC Modem] - [Ad-
vanced] - [Advanced Port Settings].
2Select [COM9] at [COM Port Number] and select [OK].
3Select [OK] and restart the computer.
1Turn on or restart the computer.
Press   F2   while [Panasonic] screen is displayed soon after
the computer begins the startup procedure.
If [Enter Password] is displayed, enter the Supervisor Password.
2Select the [Advanced] menu and confirm the followings.
The serial port’s setting for [Wireless Modem] is optimal.
[On & Off] is selected at [Power SYNC with PC].
If [On & Off] is not set, confirm the power to the EDGE modem is on.

For details on the COM ports assigned to wireless modem, refer to “Technical
Information” in the Reference Manual.
NOTE
3Save the settings and exit the Setup Utility.
4Log on to Windows with the administrator authority.
5Insert the CheckNet CD-ROM into the drive.
6At [Welcome to the Found New Hard-
ware Wizard], select [No, not this time],
and then select [Next].
Installing the Software   
						

							14
10Input [x:\setup\setup.exe]*2 in [start] -
[Run] and select [OK].
Follow the on-screen instructions.
*2“x:” is the drive letter of the CD-ROM drive. Change this to
match the drive letter on your own computer.
11Select [Yes, I want to restart my com-
puter now.], then select [Finish].
The computer will restart.
9Select [Finish].
7Select [Install from a list or specific lo-
cation (Advanced)], then select [Next].
8Select [Search for the best driver in
these locations], add the check mark for
[Include this location in the search:], in-
put [x:\]*
1, and then select [Next].
*1“x:” is the drive letter of the CD-ROM drive. Change this to
match the drive letter on your own computer.
Installing the Software         
						

							15
12Log on to Windows with the administrator authority.
13Making extra settings for the EDGE modem.
Select [start] - [Control Panel] - [Printers and Other Hardware] - [Phone and Mo-
dem Options] - [Modems], select your EDGE modem (Siemens AG WM USB Mo-
dem), and then select [Properties].
In [Advanced], enter the extra initialization commands as follows.
AT+CGDCONT=,,

Example: :1, :ip, :internet.t-d1.de
AT+CGDCONT=1,ip,internet.t-d1.de

(Note that the APN shown here represents the German network provider T-D1 and
needs to be replaced with the APN address supplied by your own network provider.)
Select [OK].
Opening the Online Manual
“Operating Instructions for using EDGE Modem” explains how to access the network using
the EDGE modem.
It can be accessed from the following menu.
[start] - [All Programs] - [Panasonic] - [CheckNet] - [Manual]
Uninstalling the Software
CheckNet
Use the following menu.
[start] - [Control Panel] - [Add or Remove Programs]
Wireless modem driver
Select [start] - [Control Panel] - [Performance and Maintenance] - [System] - [Hardware] -
[Device Manager] - [Modems] - [Siemens AG WM USB Modem] and uninstall the driver. 
						

							16
Setup Utility
The parameters for [Wireless Modem] have been added in [Advanced] menu of the Setup
Utility.
APN Access Point Name
CID Context Identity
EDGE Enhanced Data rates for Global Evolution
GPRS General Packet Radio Service
GSM Global System of Mobile Communication
IP Internet Protocol
PDP Packet Data Protocol
PIN Personal Identification Number
PLMNPublic Land Mobile Network
PPP Point to Point Protocol
QoS Quality of Service
SIM Subscriber Identity Module
TCP Transmission Control Protocol
Abbreviations
Appendix 
						

							17
Specifications
*1Supported models only.
GSM850 Class 4 (2 W)
PCS1900 Class 1 (1 W)
GSM850 Class E2 (0.5 W)
PCS1900 Class E2 (0.4 W)
MultiSlot Class 10
Mobile station Class B
MultiSlot Class 12
Mobile station Class B
Analog & ISDN
Baud rate: 9600 bps / 14400 bps
Point-to-point Mobile Originated and
Mobile Terminated
Cell Broadcast
Group 3, Class 1
HR (Half Rate)
FR (Full Rate)
EFR (Enhanced Full Rate)
AMR (Adaptive Multi Rate)
Full speed (12 Mbps)
1.2 kbps - 115 kbps
Supported SIM card: 3 V
SIM card plus 25 SMS messages
Frequency Band & GSM/GPRS
Power Class
EDGE (EGPRS)
Data CommunicationEDGE (EGPRS)
GPRS
CSD
Other Features SMS
FAX
Voice*1
Interface USB
Serial
SIM
Data Storage SMS 
						

							18
Memo 
						

							19 
						

							© 2005 Matsushita Electric Industrial Co., Ltd.  All Rights Reserved.
Printed in Japan
FJ0505-0
DFQX5545ZA