Panasonic Cf 08 Owners Manual

							21
Before making the settings for the wireless display, check the following server set-
tings. 
zIs the remote desktop allowed to use? 
zIP address and subnet mask (if the name server is inside the network, use the 
server name instead.) 
zUser name and password
6 Make the network setting.
When making connections with a LAN
zFor the following operation, make 
sure the LAN is enabled. 
Tap [ETHERNET1], and then tap 
[File] - [Enable].
The icon will change from   to 
. When making connections with a wire-
less LAN
ADouble-tap [ETHERNET1].ADouble-tap [WIRELESS LAN1].

BTap the [IP address] tab, and set an IP address and subnet mask.
If DHCP is available on the networkIf DHCP is not available on the network
Select [Obtain an IP address via 
DHCP].Select [Specify an IP address], and 
enter the IP address, subnet mask and 
if necessary, default gateway.

CTap [OK].
zWhen making connections with a wireless LAN
ADouble-tap   on the desktop, and then tap [Wireless LAN].
BTap the [Wireless Information] tab, and then tap the access point from the 
list.
Now, select settings as follows according to your own network environ-
ment.
CTap [Connect].
CF-08.book  21 ページ  ２００６年４月６日　木曜日　午後６時３８分 
						

							22
First-time Operation
The client used will differ depending on the server. 
When making connections with Microsoft® Remote Desktop Connection
Perform the following procedure.
ADouble-tap   on the desktop.
BTap [Options].
CEnter the following items.
zComputer: IP address or server name
zUser name: Account name for 
the server
zPassword: The password 
required to log on to the server
• If a check mark is added for [Save 
my password], the password will 
be saved, and it will not be neces-
sary to enter the password for 
subsequent connections. 
zDomain: (If required, enter it.)
DTap [Save As].
Enter the file name, select the 
save destination and tap  .
The settings made in step A-D will be saved, and   
*1
 will appear on the desktop.
*1The file name entered in step D will appear instead of “XXX”.
ETa p  .
7 Make the settings to connect the server. 
Server nameClient name
zMicrosoft
® Windows® XP Professional
zMicrosoft® Windows® Server 2000
zMicrosoft® Windows® Server 2003Microsoft
® Remote Desktop Connec-
tion
zCitrix
® MetaFrame Presentation 
Server 3.0
zCitrix
® Presentation Server 4.0Citrix
® ICA® Client
zWeb server
Microsoft
® Internet Explorer
CF-08.book  22 ページ  ２００６年４月６日　木曜日　午後６時３８分 
						

							23
When making connections with Citrix® ICA® Client
Perform the following procedure.
ADouble-tap   on the desktop, and tap [Create New Connection].
BEnter the IP address or server name for the connection destination in 
[Server or Published Application], and tap [Save].
When the message appears, tap [Yes].
CSelect the name entered in step B, and tap [Edit].
DTap [Edit Logon Information], enter 
Username and Password (and Domain, 
if required), and tap [Save].
ETap [Main] at the top of the screen.
FSelect the name entered in step B and 
tap [Edit].
GTap [Edit Title], add the check mark for [Create a Desktop shortcut], and tap 
[Save], then tap  .
The settings made in step A-G will be saved, and   
*1
 will appear on 
the desktop.
*1The file name entered in step B will appear instead of “XXX”.
When making connections with  Microsoft® Internet Explorer
Perform the following procedure.
ADouble-tap   on the desktop, and then double-tap [Internet Options].
BMake the necessary settings, then tap  .
You can set the password and/or enable/disable some functions for security purpose.
8 Make the security setting.
CF-08.book  23 ページ  ２００６年４月６日　木曜日　午後６時３８分 
						

							24
First-time Operation
You can set two types of users with different operating authorities.
The security setting screen can be displayed using the following procedure.
ADouble-tap   on the desktop.
BDouble-tap [Security (Supervisor)].
Here, we will explain the settings made by the Supervisor for the Supervisor and User. 
Setting the password
First, set the Supervisor Password using the following procedure.
ATap the [Supervisor] tab.
BEnter your password in [New Password].
CEnter your password again in [Confirm Password] and tap  .
DAt the confirmation message, tap [Yes].
When the message that recommends executing Flash Backup appears, tap  .
Next, set the User Password using the following procedure. 
ATap the [User] tab.
BSet the password. 
Refer to step B-D of the Supervisor Password setting. (Îabove)
CAUTION
zDo not forget your password. If you forget your Supervisor Password, you will 
not be able to use your wireless display. Contact your technical support office. 
SupervisorUser
Changes settings related to the wire-
less display operations, and controls 
the operations of the User.Executes only operations that have 
been limited by the Supervisor.
[Supervisor] tab [User] tab[Device Permission] tab
Settings for the Supervi-
sorSettings for the User Settings for the Supervi-
sor and User
CF-08.book  24 ページ  ２００６年４月６日　木曜日　午後６時３８分 
						

							25
NOTENOTE
zThe password will not be displayed on the screen.
zYou can use up to 40 alphanumeric characters (excluding spaces).
zWhen the password has been set, you need to enter your password in [Current 
Password].
zTo disable the password, leave the input field empty.
zDisabling the Supervisor Password also disables the User Password.
Set the operating restrictions
The following settings can be made by tapping each tab.
„[Supervisor] tab
„[User] tab
Add the check mark, and the settings will be enabled.
A. Auto Launch
When you select an application (b), 
that application will automatically 
start up when the wireless display is 
started. 
• If the connection settings for 
Microsoft
® Remote Desktop Con-
nection or Citrix
® ICA® Client have been made in advance (Îpage 22) 
and the check mark is added for 
[Wait for Network Connection] (B), 
you can set these applications to 
start up automatically.
B. Wait for Network Connection
An application (b) will launch after 
the network connection is build up.
CF-08.book  25 ページ  ２００６年４月６日　木曜日　午後６時３８分 
						

							26
First-time Operation
C. Skip Password Dialog
Allows the User to log on without 
entering a password.
When the User turns on the wireless 
display, the [Enter Password] screen 
is not displayed.
(If you press the power button with 
the USER button pressed, the [Enter 
Password] screen will be displayed, 
and the Supervisor can log on with 
the Supervisor Password.)
D. Allow Connection Configuration
Allows the User to create and 
change connection settings.
To create the connection settings: 
Îpage 22
E. Allow Application Assignment
Allows the User to allocate applica-
tions to the keyboard button, USER 
button (Îpage 38) and Quick Menu 
(Îpage 39).
F. File Explorer
Allows the User to view files via Win-
dows Explorer.   will be dis-
played on the desktop.G. Internet Explorer
Allows the User to access to the 
Web browser, and to create/change 
connection settings.   will be 
displayed on the desktop.
H. Control Panel
Allows the User to make various set-
tings in Control Panel. 
•
You can set the items that the User 
is allowed to use with the following 
procedure.
ATap [Permission] (h) to display 
the [Permission] screen.
BAdd the check mark for only the 
items to be displayed in the [Con-
trol Panel] screen, and tap  .
I. Allow Change Auto Launch
Allows the User to change [Auto 
Launch] (A) setting.
„[Device Permission] tab
The following items cannot be used when the check mark is removed.
When all settings are complete, tap  .
When the message that recommends executing Flash Backup appears, tap  .
CF-08.book  26 ページ  ２００６年４月６日　木曜日　午後６時３８分 
						

							27
Settings made up to step 8 must be saved (backed up) using the following procedure. 
If the settings are not saved, they will be lost when the wireless display is turned off.
ADouble-tap   on the desktop and double-tap [Flash Backup].
Confirm that your wireless display is connected to a power outlet. (Îpage 19)
BTap [Start Backup].
Backing up data will start.
CWhen the message “Backup successful.” appears, tap  .
Copying settings to another CF-08
Using the following procedure, you can copy the backed up settings to another CF-
08 from an SD Memory Card or other media. 
ADouble-tap   on the desktop and double-tap [Flash Copy].
Confirm that your wireless display is connected to a power outlet. (Îpage 19)
BInsert the copy destination media, and select the media in “Copy To.”
CEnter the file name and tap [Copy Backup].
Copying data will start.
zThe file that has already existed cannot be overwritten. 
In this case, tap  , change the file name, and tap [Copy Backup].
DWhen the message “Copy successful.” appears, tap  .
ERemove the media.
FDouble-tap   on the desktop and then double-tap [ROM Update].
GConnect your wireless display to the power outlet. (Îpage 19)
9 Save the settings. 
From step F onward are for CF-08 to which the original settings will be copied. 
Turn on the CF-08 to which the settings will be copied, and perform the following 
procedure. 
CF-08.book  27 ページ  ２００６年４月６日　木曜日　午後６時３８分 
						

							28
First-time Operation
HInsert the media containing the files copied in step C-D, and then tap 
[Browse].
ISelect the file and tap  .
JTap [Next].
KTap [Update Start].
LWhen the confirmation message appears, tap [Yes].
ROM Update will start.
When ROM Update terminates, the wireless display will restart and the cali-
bration screen will appear automatically. (Îpage 20)
CF-08.book  28 ページ  ２００６年４月６日　木曜日　午後６時３８分 
						

							29
Starting Up/Shutting Down


Starting Up
1 Turn on the wireless display.
When you log on as a SupervisorWhen you log on as a User
Press the power button with the USER 
button pressed.
• If you do not do so, even when 
you set enter the Supervisor 
Password, the wireless display 
will run in the User operating 
environment.Press the power button.
2 When the [Enter Password] screen appears, enter the 
password, and then tap [OK].
zWhen you log on as a User
When the check mark is added for [Skip Password Dialog] of the [User] 
tab in [Security (Supervisor)], the [Enter Password] screen is not dis-
played. 
(Îpage 26)
CF-08.book  29 ページ  ２００６年４月６日　木曜日　午後６時３８分 
						

							30
Starting Up/Shutting Down
NOTENOTE
zWhen logged on as a User, the security setting screen can be displayed using 
the following procedure.
ADouble-tap   on the desktop.
BDouble-tap [Security (User)].
The following screen will appear.
3 Connect to the server.
When making connections with Microsoft® 
Remote Desktop ConnectionWhen making connections with 
Citrix® ICA® Client
Double-tap 
*1 on the desktop.
The server desktop screen will appear.
*1The file name entered when making the 
server setting will appear instead of “XXX”.
• When you do not add the check mark 
for [Save my password] in “When mak-
ing connections with Microsoft
® Remote 
Desktop Connection” step C of “First-
time Operation” step 
7(Îpage 22):
Enter the password, and then tap [OK].Double-tap 
*2
 the desktop.
*2The file name entered when mak-
ing the server setting will appear 
instead of “XXX”.
When making connections with 
Microsoft® Internet Explorer
Double-tap   on the desktop.
A. Auto Launch (Îpage 25)
B. Wait for Network Connection (Îpage 25)
• When the Supervisor does not 
add the check mark for [Allow 
Change Auto Launch] in the 
[User] tab of the [Security Set-
tings (Supervisor)] screen, [Auto 
Launch] and [Wait for Network 
Connection] cannot be set here.C. Password
To set the password: Îpage 24
• If a User Password has been set in the 
[User] tab of [Security (Supervisor)] 
screen, User cannot delete a password.
• If a User Password has not been set in 
the [User] tab of [Security (Supervisor)] 
screen, User cannot create a new 
password.
CF-08.book  30 ページ  ２００６年４月６日　木曜日　午後６時３８分