Panasonic Cf 08 Owners Manual

51
„To make connections with the dial-up network
Tap the [DialUp Network] tab, and make the following procedure.
zThe setting procedure below may vary depending on the Bluetooth device you 
are using. (For example, the [Enter PIN code] screen described in step F may 
appear multiple times or in a different order.)
For details, refer to the manual that comes with your Bluetooth device. 
ATurn on the Bluetooth device.
BTap [Select Device] (A).
CTap [Search] (D).
DTap the Bluetooth device name you want to...

52
Bluetooth
NDouble-tap the connection name created in step J.
OAt the [Dial-Up Connection] screen, enter the proper User Name, Password, 
and Domain (G) for the connection destination. 
If the phone number entered 
in step L does not display 
correctly at “Phone” (H), 
such as too many numbers 
showing, perform the follow-
ing operation. 
Tap [Dial Properties] (I).

Tap [Dialing Patterns], enter the correct number, and then tap  .

Ta p  .
PTap [Connect].
When the connection is active, the [My...

53
Control Panel
In Control Panel, you can see the list of applets that can be used on this wireless 
display. If you double-tap the icon (or the name), the screen will start up. 
Explanations for each Control Panel applet can be displayed using the following 
procedure. 
ADouble-tap   on the desktop.
BTap [View].
CTap [Details].
CAUTION
zAfter changing settings, if you do not tap  , some settings will not take effect.
CF-08.book  53 ページ  ２００６年４月６日　木曜日　午後６時３８分 

54
For Effective Use
Maintenance
„LCD
Do not use water when cleaning the panel. Ingredients included in water may 
leave residue and reduce readability of the screen.

Avoid rubbing off dust/dirt with cloth since it may leave scratch on the screen.
Sweep dust/dirt with fine brush, then wipe it with dry soft cloth used for cleaning 
glasses.

Apply camera lens cleaner on a soft gauze and clean it with gentle force. Then, 
wipe with dry soft cloth used for cleaning glasses.
„Areas excluding the LCD
Wipe...

55
Troubleshooting
Follow the instructions below when a problem has occurred. For a software prob-
lem, refer to the software’s instruction manual. If the problem persists, contact  
your technical support office.
„Starting Up
„Display
„Touchscreen
Cannot start up. 
The power indica-
tor or battery indica-
tor is not lit.zConnect the AC adaptor.
zInsert a fully charged battery.
zRemove the battery pack and the AC adaptor, then con-
nect them again.
Cannot turn on the 
wireless display.zLeave it in an...

56
Troubleshooting
„Shut Down
„Sound
„Wireless Communication
„Connecting Peripherals
Cannot shut down.zPress the power button for four seconds or longer to 
shut down the wireless display.
No sound.zConfirm the volume for [Quick Menu] or [Volume & 
Sounds] in Control Panel.
Unable to hear 
sound in stereo.zPlayback conditions vary depending on the server. 
• If you are connecting through Microsoft
® Remote 
Desktop Connection or a web server, you will hear 
monaural sound even if the original sound is...

57
„Others
No response.zThe screen content may not display correctly due to 
poor signal quality. In such case, move to a place where 
signal quality is good then make a connection.
zPress the power button for four seconds or longer to 
shut down the wireless display, and then press the 
power button to turn it on.
CF-08.book  57 ページ  ２００６年４月６日　木曜日　午後６時３８分 

58
LIMITED USE LICENSE AGREEMENT
THE SOFTWARE PROGRAM(S) (“PROGRAMS”) FURNISHED WITH THIS 
PANASONIC
® PRODUCT (“PRODUCT”) ARE LICENSED ONLY TO THE END-
USER (“YOU”), AND MAY BE USED BY YOU ONLY IN ACCORDANCE WITH 
THE LICENSE TERMS DESCRIBED BELOW. YOUR USE OF THE PROGRAMS 
SHALL BE CONCLUSIVELY DEEMED TO CONSTITUTE YOUR ACCEPTANCE 
OF THE TERMS OF THIS LICENSE.
Matsushita Electric Industrial Co., Ltd. (“MEI”) has developed or otherwise 
obtained the Programs and hereby licenses their use to you. You...

59
F. You may not remove any copyright, trademark or other notice or product identi-
fication from the Programs and you must reproduce and include any such 
notice or product identification on any copy of any Program.
YOU MAY NOT REVERSE ASSEMBLE, REVERSE COMPILE, OR MECHANI-
CALLY OR ELECTRONICALLY TRACE THE PROGRAMS, OR ANY COPY 
THEREOF, IN WHOLE OR IN PART.
YOU MAY NOT USE, COPY, MODIFY, ALTER, OR TRANSFER THE PRO-
GRAMS OR ANY COPY THEREOF, IN WHOLE OR IN PART, EXCEPT AS 
EXPRESSLY PROVIDED IN THE...

60
Contrat de licence d’usage limité
Le(s) logiciel(s) (les “Logiciels”) fournis avec ce produit Panasonic® (le “Produit”) 
sont exclusivement concédés en licence à l’utilisateur ultime (“vous”), et ils ne peu-
vent être utilisés que conformément aux clauses contractuelles cidessous. En util-
isant les logiciels, vous vous engagez de manière définitive à respecter les termes, 
clauses et conditions
des présentes.
Matsushita Electric Industrial Co., Ltd. (“MEI”) a mis au point ou obtenu les 
Logiciels et...