Panasonic Cf 07lzazydm Owners Manual

11
Getting Started
Handling
This computer has been designed so as to minimize shock to the hard disk drive, etc., but
no warranty is provided against such trouble.  Therefore, as a precision instrument, be
extremely careful in the handling.
Do not drop or hit your computer against solid objects.
Remove all cables before transporting your computer.
We recommend preparing a fully charged battery.
When transporting spare batteries inside a package, briefcase, etc., it is recommended
that the batteries be...

12
Getting Started
2Write down the Product Key
Write down the number shown on the “Certificate of Authenticity” located on the
bottom of the computer in the “Customer’s Record” section on page 2 of this manual.
First-time Operation
Read the steps below to help you learn what parts are included, and to gain an understanding
of some basic computer-related operations.
1Confirm the inclusion of all parts
Make sure the parts shown in the figure have been supplied.  If any of these items
are missing or is not...

13
Getting Started
4Insert the two battery packs
CAUTION
2Slide the latch down, and then without releasing it,
open the cover as illustrated.
3Firmly attach the battery pack to the connector as
illustrated.
4Close the cover, then lock it by sliding the latch to
the left.
3Read the LIMITED USE LICENSE AGREEMENT (page 40)
Before removing the seal covering the power switch, read the LIMITED USE LI-
CENSE AGREEMENT.
Main Battery Pack SlotSecond Battery Pack Slot
1Turn over the computer, then unlock the cover...

14
Getting Started
6Connect an external display, external keyboard and exter-
nal mouse to the port replicator 
( Operating Instruction of the Port
Replicator)
7Connect the port replicator to a power outlet
When the AC adaptor is connected to the port replicator, charging begins automati-
cally.
3
2
1
Be sure the AC adaptor is connected until completing Step 11 on page 18.
Handling the AC adaptor
Do not twist or pull the AC power cord forcefully.  Doing so may damage the
connections.
Use only the...

15
Getting Started
NOTE
Depending on the user settings, if there is no input from a key or an external
mouse for a certain interval of time, the power to the external display and hard
disk may be turned off.  The external display will resume operation when an
external mouse is used or a key is pressed.
The power to the external display may be turned off when an application soft-
ware is being installed.  In this case, because it is conceivable that a selection
dialog box will be shown, do not press
Space...

16
Getting Started
Do not press any key or move the mouse until [Windows 2000 Professional
Setup] is displayed.
CAUTION
Windows 2000
First-time Operation
3Select settings for your region, then select [Next].
4Enter your name and organization and select [Next].
5Enter your computer name and administrator password and select [Next].
CAUTION
Remember this password! If password is forgotten, Windows 2000 cannot
be operated.
6Input the correct date, time and time zone and select [Next].
You can also complete...

17
Getting Started
9At the [Network Identification Wizard], select [Next].
10At the [Users of This Computer], select [Users must enter a user name and
password to use this computer], then select [Next].
11Select [Finish].
12Enter your administrator password and select [OK].
Label on the top sur-
face, and insert the
shutter-side headfirst.
USB Floppy
Disk Drive
CAUTION
1Connect the optional floppy disk drive to the port
replicator.
2Prepare 2HD floppy disks and make sure they are
not in the...

18
Getting Started
First-time Operation
11Setup the wireless display
1Slide the latch to the right, and open the cover, then
insert the battery pack in the wireless display.  Af-
ter inserting the battery pack, close the cover, then
slide the latch to the left.(
 Operating Instruction
of the wireless display)
2Connect the wireless display to a power outlet and
turn on the wireless display.

Select network type.
AdHoc Infrastructure Cancel
Be sure to insert the battery pack as illustrated.
CAUTION
Ta b...

19
Getting Started
3Select [AdHoc].
The following screen is displayed.

Change setting on host PC to the following
value, reboot the host PC, then select
Connect below.
Wireless LAN card
Network Type : AdHoc
SSID :cfvdw07-43411
Encryption : disable
TCP/IP
IP Address : 10.57.148.205
NetMask :255.0.0.0
MeiWDS
Password : wdsp
Connect       Cancel
CAUTION
Do not select [Connect] until step  10  is completed.
This screen is a sample.
4Select  on the taskbar of the external display, then select...

20
Getting Started
First-time Operation
7Select [OK], then select [OK].
8Windows 98
Select [Yes].  The computer will restart.

Add the check mark for [Specify
an IP address], match the settings
of the computer with the informa-
tion displayed on  of the step  
3  .
This screen is a sample.
6Windows 98
Select [Start] - [Settings] - [Control Panel] - [Network] - [TCP/IP   PRISM2
IEEE 802.11 PC CARD Adapter] - [Properties] - [IP Address].
The following screen is displayed.
Windows 2000
Select [Start] -...