Panasonic Cf 07 Mk1 Win98 2000 Owners Manual

21
PC Cards
Installing a PC Card
Open the cover, then slide the PC Card in until it snaps into place.  Refer
to the manual for each card on how to install the card (insertion is typically
label-side up).
After inserting the card, close the cover. Your computer has one PC Card slot.  This slot conforms to the PC Card Standard;
therefore, communications or SCSI devices, etc., may be utilized.  The slots allow you to
use one Type I or Type II card.
Check the PC Cards’ specifications.  Be sure the total...

22
 Removing a PC Card
Do not remove a PC Card while your computer is in the standby or
hibernation mode.
Button
CAUTION
Double-click  (    Windows 2000    ) on the taskbar, select the PC
Card slot, then select [Stop].
Follow the on-screen instructions.
(When removing a PC Card after turning off the computer, this step
is not necessary.)
Open the cover, then press the button out, then press the button
again.
Slide the PC Card out.
Close the cover.
PC Cards
After selecting  (    Windows 2000    ) , do not...

23
A port replicator is available as an option (CF-VEB071).  This device allows a
variety of peripherals to be connected including a headphone or microphone,
etc.
The port replicator connects to the expansion bus connector on the bottom
of your computer.
For more detailed information, refer to the operation manual of the port
replicator.
Port Replicator
When connecting the external display to the display port on the port
replicator, the characters on the external display may be blurred if 1280 x
1024 (or...

24
Parallel Port
Printer 
For more detailed information, refer to the operation manual of
the external display.
Confirm whether or not the setting for the [Parallel Port] in the
Setup Utility is optimal(
 page 31)
NOTE
4Turn on the printer, then turn on your computer
5Setting your printer
Go to [Start] - [Settings] - [Printers].  Find your printer’s icon, click on it,
then select [File] - [Set as Default]*.  If no icon is available, select [Add
Printer] and follow the on-screen instructions.
*Windows...

25
2Connect your computer to the optional port replicator
( Operating Instructions of the port replicator,  page 23)
3Connect the external display to the port replicator
1Power off your computer (  Starting Up/Shutting Down)
Do not shut down using the standby or hibernation mode.
4Turn on the external display, then turn on your computerExternal Display Port
External Display 
For more detailed information, refer to the operation manual of the
external display.
NOTE
5Select your external display
Set your...

26
Removing a USB device
Installing a USB device
USB Devices
For more detailed information, refer to the operation manual of the USB
device.
You may need to install drivers compatible with the OS you are using
for your USB devices. Follow the on-screen instructions and refer to
the operation manual for USB devices on how to install the driver.
When a USB device is connected, there are cases the standby or hiberna-
tion function will not operate in a normal manner due to the USB device. In
addition, a USB...

27
LAN 
1Select [Device Manager] in [Start] - [Settings] - [Control Panel] - [System] - [Device
Manager].
2Select [Intel(R) PRO/100 VE Desktop Adapter], then select [Properties].
3Remove a check mark [Disable in this hardware profile], select [OK], then select
[Close].
4Restart the computer.
Using LAN
Setting LAN
Windows 98 When using the LAN, set [LAN] to [Enable]* in the Setup Utility.  (* Default)
1Power off your computer (  Starting Up/Shutting Down)
Do not shut down using the standby or hibernation...

28
LAN 
Wake up from LAN
This is a function to automatically power the computer on from a network server when
the computer is in the standby or hibernation mode*.  To use this function, it is neces-
sary to have a network environment that accommodates Wake up from LAN.
To use this function:
1Select [Device Manager]*
1 in [Start] - [Settings] - [Control Panel] - [System].
2Select [Intel(R) PRO/100 VE Desktop Adapter] from [Network adapters].
3Select [Properties]*
2.
4Select [Power Management], add the...

29
Setup Utility 
Running the Setup Utility
For more details, on-line help is available;press    F1   .
To close the Setup Utility, see page 34.
NOTE
Key Operations
F1:To display the corresponding “help” file.
Enter:To display sub-menu.
Esc:To display [Exit] menu.
     :To move among the menus.
     :To move among the items.
F5     F6:To move among the values.
F9:To set default  settings.
(When starting up the Setup Utility with the User Password, this key is not
available.)
F10:To save the settings and...

30
Normal Temperature
High Temperature
Refreshing the Battery  ( page 17)
Setup Utility 
Environment
Refresh Battery
Main Menu
Model No: xxxx
Serial No: xxxx
BIOS Version: Vx.xxLxx
System Time: [xx:xx:xx]
System Date: [xx/xx/xxxx]
System Memory: xxx MB
Primary Master: xx GB
Secondary Master: CD Drive
Environment: [Normal Temperature]
Refresh Battery
(     :  Default)Parameters