Home > Panasonic > Security Camera > Panasonic Cell Phone Camera Portal Application Instruction

Panasonic Cell Phone Camera Portal Application Instruction

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual Panasonic Cell Phone Camera Portal Application Instruction online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 2
    Add page 1 to Favourites
    image text
    Enable zoom 
    							Cell Phone Camera Portal Application Instructions
This application allows you to connect to the Camera Portal from a cell phone, and view camera 
images (still images).
1.Enter http://WAN IP Address(or URL):Port Number/mobile  into your cell phones address 
field, and connect to the Camera Portal.
Example:  http://WAN IP  Address/mobile  (or XXXXX.viewnetcam.com/mobile ). (If the port 
number is set to 80 
[default], it is not necessary to enter it.)
2.When the authentication window is displayed, enter the User Name and Password set for the 
Network Camera Management System.
Register and display 
the names of up to 
16 cameras.
Displays cameras 
9 to 16.Displays cameras 
1 to 8.
• The Camera Portal is displayed.
3.Press the relevant dial key to select a camera.
 The camera image is displayed. (However, motion images cannot be displayed.) For more  details on camera images, see the cameras instructions.
Notes
 Only cell phones with an authentication function  can be used. See Panasonics support website 
( http://panasonic.co.jp/p cc/products/en/netwkcam/ ) for details about which models can be 
used.
 Some cell phones may only be used when the port nu mber is 80. If that is the case, camera images 
cannot be viewed. See Panasonics support website ( http://panasonic.co.jp/pcc/products/en/
netwkcam/ ) for more details.
 Cameras registered by URL are not supported.
 The names of cameras that have Access Control set to Private are also displayed. However the 
camera images cannot be viewed.
    Add page 2 to Favourites
    image text
    Enable zoom 
    							© 2004 Panasonic Communications Co., Ltd. All Rights Reserved.PSQW2301ZB
Connection patterns apart from the one below are not under warranty.
Troubleshooting
Problem Cause and Remedy
The Cell Phone Camera Portal 
cannot be accessed from the 
WAN (Internet) side. • Check that this product is connected to the Internet. See 
A website is not displayed in Troubleshooting in the 
Installation/Troubleshooting manual.
 Check that the Cell Phone Camera Portal application is In 
Use. You can check this on the Application list in 
Execution Control and Registration Deletion of 
Applications. If the application is disabled, select it and 
click [Execute].
 Check that the IP address (or URL) entered in the  address field of your cell phone is correct.
 The cell phone must have a built-in web browser, an  authentication function, and be compatible with JPEG 
pictures.
 Some cell phones may only be used when the port  number is 80. If that is the case, camera images cannot 
be viewed.
 See Panasonics support website  (http://panasonic.co.jp/p cc/products/en/netwkcam/ ) 
for details about which cell phone models can be used.
InternetGlobal Address
Private Address 
192.168.0.
    All Panasonic manuals Comments (0)

    Related Manuals for Panasonic Cell Phone Camera Portal Application Instruction