Panasonic CD Stereo System Sc Pmx9 Owners Manual

VQT5J68
until 
2014/4/3
PPThank you for purchasing this product.
Please read these instructions carefully before using this product, and save this 
manual for future use.
If you have any questions, visit:
U.S.A.: www.panasonic.com/support
Canada: www.panasonic.ca/english/support
Register online at www.panasonic.com/register
 (U.S. customers only)
Owner’s Manual
CD Stereo System
Model No.  
SC-PMX9
Table of contentsIMPORTANT SAFETY INSTRUCTIONS ................................................ 2
Supplied...

VQT5J682Do the procedures with the remote control. You can also 
use the buttons on the main unit if they are the same.
Your system and the illustrations can look differently.
These owner’s Manual are applicable to the following 
system.IMPORTANT 
SAFETY INSTRUCTIONSRead these operating instructions carefully before using 
the unit. Follow the safety instructions on the unit and the 
applicable safety instructions listed below. Keep these 
operating instructions handy for future reference.1 Read these...

3VQT5J68
0Supplied accessoriesCheck and identify the supplied accessories.Maintenance• To clean the main unit, wipe with a soft, dry cloth.
• To clean the speakers, wipe with a fine-textured and dry cloth such as a microfibre cleaning cloth.• Never use alcohol, paint thinner or benzine to clean this system.• Before using chemically treated cloth, read the instructions that came with the cloth carefully.Preparing the remote control• Use alkaline or manganese battery.
• Install the battery so that the...

VQT5J684Making the connectionsConnect the AC power supply cord only after all the 
other connections have been made.1
Connect the FM indoor antenna.
Place the antenna where reception is best.• Use an FM outdoor antenna if radio reception is poor.
2
Connect the speakers.Be careful not to cross (short-circuit) or reverse 
the polarity of the speaker wires as doing so may 
damage the speakers.• Connect the cable with a red line to the red terminal (
r).
3
Connect the AC power supply cord.Do not use an AC...

5VQT5J68
Overview of controls
1 Standby/on switch [Í], [ Í/I]
Press to switch the unit from on to standby mode or 
vice versa. In standby mode, the unit is still 
consuming a small amount of power.
2 Numeric buttons [1 to 9, 0,  S10]
To select a 2-digit number
Example: 16: [ S10] 
> [1] >
 [6]
3 Delete a programed track
4 Select audio source
5 Basic playback control
6 Select the sound effects
7 View the iPod menu
8 View content information
9 Clock and timer operation
10 Set the program function
11 Adjust...

VQT5J686“iPod_Dock” (Using Lightning connector):
• Make sure that the iPod/iPhone is fully inserted and its back is resting against the cushion pad.
• Make sure to remove the iPod/iPhone from its case.
• Make sure to align your iPod/iPhone with the connector  when inserting.
“iPod_Port”:
• Use the dedicated USB cable (not supplied) for iPod/ iPhone/iPad.
• Insert the USB device directly. Do not use any USB  extension cable.
• Before removing the USB device, select a source other  than “USB”.
Disc tray:
•...

7VQT5J68
• The LAN cable must be connected or disconnected while the AC power supply cord is disconnected.
• Use category 5 or above straight LAN cables (STP) when  connecting to peripheral devices.
• Inserting any cable other than a LAN cable in the LAN port  can damage the unit.
• When a LAN cable is connected, wireless settings will be 
canceled. This system has built-in Wi-Fi
® and can be connected to a 
wireless router.
Preparation
• Place this system as close to the wireless network router  as...

VQT5J688• This system can also be set using the WPS PIN code.(Before starting, refer to the wireless network router’s operating 
instructions for details on how to enter the PIN code.)1 Press [SETUP] on the remote control repeatedly to select “Net Setup” and then press [OK]. *
2
2 Press [SETUP] on the remote control repeatedly to select “WPS PIN” and then press [OK]. *
2
3 Enter the PIN code into the wireless network router.*1 Replace with the following step. Press and hold [D.BASS] on the main unit for...

9VQT5J68
With this method, you will access this system’s wireless 
network settings from the Internet browser of your compatible 
device.
• The following explanations are based on an iPhone.1
Press [SETUP] on the remote control repeatedly to 
select “Net Setup” and then press [OK].“With iPod” is indicated on the display.
2
Press [SETUP] on the remote control repeatedly to 
select “Manual” and then press [OK].“Setting” blinks on the display.
3
After “Setting” blinks, connect your compatible 
device to...

VQT5J68
10
Using AirPlay with this system’s speakersPreparation
• Complete the network settings. (>6)
• Connect the iOS device or Mac/PC to the same  home 
network  as this system.1
Turn this system on.• Check that “ ” is indicated on the display.
• If it doesn’t be indicated, check the network 
settings. ( >6)
2
iOS device: Start the “Music” (or iPod) app.
Mac/PC: Start “iTunes”.
• If the Music app on your iOS device is used, select the 
audio file you want to play.
3
Select “Panasonic PMX9 _ _ _ _ _...