Panasonic Cd Stereo System Sc-pm321 Operating Instructions
Here you can view all the pages of manual Panasonic Cd Stereo System Sc-pm321 Operating Instructions. The Panasonic manuals for Stereo System are available online for free. You can easily download all the documents as PDF.
Page 11
RQTV0160 11 Manual TuningManual Tuning 1Press [TUNER/BAND] repeatedly to select “XM”. 2Press [PLAY MODE] to select “MANUAL”. Each time you press the button: MANUAL PRESET 3Press [/4] or [/¢] to select a channel. Press and hold [/4] or [/¢] to scan through quickly. OR Press the numeric buttons for direct access to an XM channel. For two-digit channel, press [ h10] once, and then the two digits. For three-digit channel, press [ h10] twice, and then the three digits. Note You can enter a channel...
Page 12
RQTV0160 12 Setting the clockSetting the clock This is a 12-hour clock. 1Press [CLOCK/TIMER] to select “CLOCK”. Each time you press the button: CLOCK ˚ PLAY Original display 2Within 5 seconds, press [/4] or [/¢] to set the time. 3Press [CLOCK/TIMER] again to confirm. Displaying the clockPress [CLOCK/TIMER] to display the clock for few seconds. NoteThe clock may lose or gain minutes over a period of time. Readjust as necessary. Using the sleep timerUsing the sleep timer This function enables you to turn...
Page 13
RQTV0160 13 Sound adjustment Selecting sound effectsSelecting sound effects You can change the sound effect by selecting Preset EQ or adjusting the bass or treble effect. Preset EQPreset EQ Press [PRESET EQ] repeatedly to select your desired setting. HEAVY → CLEAR → SOFT → VOCAL → EQ-OFF Setting Effect HEAVY Adds punch to rock CLEAR Clari es higher frequencies SOFT For background music VOCAL Adds gloss to vocal EQ-OFF No effect Bass or trebleBass or treble Enable you to enjoy the lower or higher...
Page 14
RQTV0160 14 Troubleshooting guide Before requesting service, make the following checks. If you are in doub\ t about some of the check points, or if the remedies indicated in the chart do not solve the problem, refer to the “\ Customer Services Directory” on page 16. Common problems No sound.Turn the volume up. The speaker cords may not be connected properly. Turn the unit off, check and correct the connections and turn the unit on ( ➡ page 4). Sounds un xed, reversed or come from one speaker...
Page 15
RQTV0160 15 Speci cations AMPLIFIER SECTIONFTC OUTPUT POWER both channel driven simultaneously 10 % Total harmonic distortion (THD) 60 Hz to 20 kHz 4.3 W per channel (6 Ω) RMS OUTPUT POWER both channel driven simultaneously 10 % Total harmonic distortion (THD) 5 W per channel (6 Ω) Output impedance HEADPHONE 16 to 32 Ω MUSIC PORT 12 kΩ Phone jack Terminal Stereo, 3.5 mm Music Port jack Terminal Stereo, 3.5 mm XM Ready XM Mini-Tuner and Home Dock FM TUNER SECTIONFrequency range 87.90 to...
Page 16
RQTV0160 16 Limited Warranty Panasonic Audio Products Limited Warranty Panasonic Consumer Electronics Company, Division of Panasonic Corporation of North America One Panasonic Way Secaucus, New Jersey 07094Panasonic Puerto Rico, Inc. Ave. 65 de Infantería, Km. 9.5 San Gabriel Industrial Park, Carolina, Puerto Rico 00985 Limited Warranty Coverage If your product does not work properly because of a defect in materials or workmanship, Panasonic Consumer Electronics Company or Panasonic Puerto Rico, Inc....
Page 17
RQTV0160 17 Product Service 1. Damage requiring service The unit should be serviced by quali ed service personnel if: (a) The AC power supply cord or the plug has been damaged; or (b) Objects or liquids have gotten into the unit; or (c) The unit has been exposed to rain; or (d) The unit does not operate normally or exhibits a marked change in performance; or (e) The unit has been dropped or the cabinet damaged. 2. Servicing Do not attempt to service the unit beyond that described in these operating...
Page 18
RQTV0160 18 Preparativos iniciales Referirse a las páginas 4 y 5 para las ilustraciones. PasoPaso 11 - Conexiones - Conexiones Conecte el cable de alimentación de CA sólo después de haber hecho todas las demás conexiones. PasoPaso 2 2 - Introducción de pilas en el - Introducción de pilas en el mando a distanciamando a distancia ■ Pilas Inserte los polos (+ y –) de la forma que se indica en el mando a distancia. Retire las pilas si no va a utilizar el mando a distancia durante un periodo de...
Page 19
RQTV0160 19 Controles Aparato principalAparato principal Los números entre paréntesis indican la página de referencia. Sensor de señal del mando a distancia1 Interruptor de alimentación en espera/conectada (y/l, POWER) (20, 23) Pulse este interruptor para cambiar del modo de alimentación conectada al modo de alimentación en espera o viceversa. En el modo de alimentación en espera el aparato consume una pequeña cantidad de corriente. Conector de puerto de música (13) Paro/demostración (8, 18, 20) 6...
Page 20
RQTV0160 20 Reproducción básicaReproducción básica CD MP3 WMA 1Pulse [y] para encender el aparato. 2Pulse [0] para abrir la tapa del disco e inserte el disco. Cierre la tapa. Tapa del disco La etiqueta tiene que estar hacia arriba 3Pulse [CD 6] para iniciar la reproducción. 4Ajuste el volumen. Para Acción detener el disco Pulse [ 7 ]. interrumpir la reproducciónPulse [CD 6]. Vuelva a pulsar para reanudar la reproducción. saltar pistas Pulse [/4] o [/¢]. buscar por pistas CDMantenga pulsado [/4] o...