Panasonic Cd Stereo System Sc-pm31, Sc-pm313 Operating Instructions

Operating Instructions
CD Stereo System
Model No. SC-PM31
SC-PM313
RQT7923-3P
For U.S.A.
As an ENERGY STAR® Partner, Panasonic has 
determined that this product meets the ENERGY 
STAR
® guidelines for energy ef ciency.
Before connecting, operating or adjusting this product, please read 
these instructions completely. Please keep this manual for future 
reference.
SC-PM313 is available in the U.S.A. only
Operations in these instructions are described mainly using 
remote control, but you can do the...

2
RQT7923
Dear customerThank you for purchasing this product.
For optimum performance and safety, please read these 
instructions carefully.
These operating instructions are applicable to the following 
system.
System SC-PM31 SC-PM313
Main unit SA-PM31 SA-PM313
Speakers SB-PM31 SB-PM31
The model number and serial number of this product can 
be found on either the back or the bottom of the unit.
Please note them in the space provided below and keep 
for future reference.
MODEL NUMBER 
SERIAL NUMBER 
User...

3
RQT7923
IMPORTANT SAFETY INSTRUCTIONS
1)  Read these instructions.
2)  Keep these instructions.
3)  Heed all warnings.
4)  Follow all instructions.
5)  Do not use this apparatus near water.
6)  Clean only with dry cloth.
7)  Do not block any ventilation openings. Install in accordance 
with the manufacturer’s instructions.
8)  Do not install near any heat sources such as radiators, heat 
registers, stoves, or other apparatus (including amplifiers) 
that produce heat.
9)  Do not defeat the safety...

4
RQT7923
To household 
AC outlet
4 Connect the AC power supply cord.  The included AC power supply cord is for use with this unit only. Do not use it with other equipment.
Getting started
3 Connect the speaker cords.
Cords with white and blue tags are for high frequency.
Cords with red and black tags are for low frequency.
Incorrect connection can damage the unit.
Ste pStep 1 1 -  M akin g t h e c o nnectio ns - Making the connections
Connect the AC power supply cord only after all other connections...

5
RQT7923
Step 2Step 2 - Inserting batteries into the remote control - Inserting batteries into the remote control




!!2,2
■ Batteries
  Insert so the poles (+ and –) match those in the remote control.
  Remove if the remote control is not going to be used for a long period of 
time. Store in a cool, dark place.
  Do not use rechargeable type batteries.
  Mishandling of batteries can cause electrolyte leakage which can damage 
items the  uid contacts and may cause a  re.
Do not:
  mix old...

6
RQT7923
Overview of controls
Main unitMain unit
Refer numbers in parentheses for page reference.
  Top of the unit
1 Standby/on switch (y/l POWER) (7, 12)Press to switch the unit from on to standby 
mode or vice versa. In standby mode, the unit is 
still consuming a small amount of power.
Remote control sensorHeadphone jack (PHONES) 
Avoid listening for prolonged 
periods of time to prevent 
hearing damage.
Plug type: 3.5 mm (1/8”) stereo 
(not included)
Cassette open (10)
Display panel
Track selection...

7
RQT7923
Numeric 
buttons
CD trays
Playing a discPlaying a disc
1Press [y] to turn the unit on.
2Press [CD 1 ~ CD 5] to select your desired tray.
3Press [0 OPEN/CLOSE] to open the disc tray and 
then load the disc. Press [0 OPEN/CLOSE] again to 
close the tray.
Label must face upward
Disc trayTray 
number
4Press [CD 6] to start play.
5Adjust the volume.
Other basic operationsOther basic operations
To A c t i o n
stop the disc Press [CLEAR 7].
pause play Press [CD 6]. Press again to 
resume play.
skip...

8
RQT7923
CChecking which CDs are in the trayshecking which CDs are in the trays
(CD CHECK)(CD CHECK)  CD-DA  MP3
1Press [CD CHECK].
CD CHECK
2Press the button again to close the trays.
  The tray with a CD being played will not open.
  If the player is stopped, all trays will open.
  Do not remove or insert CDs during CD check.
  Do not pull out the trays during CD check.
  8 cm CDs cannot be checked.
CD displayCD display
This function allows you to display the information 
on the current track....

9
RQT7923
To A c t i o n
cancel program 
modePress [PROGRAM ] in the stop mode.
replay the program Press [PROGRAM ] then [CD 6].
check program 
contentsPress [4/REW/4] or [3/FF/¢] when 
“PGM” is displayed in the stop mode.
To check while programming, press 
[PROGRAM ] twice after “PGM” appears, 
then press [4/REW/4] or [3/FF/¢].
add to the programRepeat steps 3 to 5 in the stop mode for 
CD-DA (refer page 8).
Repeat steps 6 to 8 in the stop mode for 
MP3 (refer page 8).
clear the last track Press [DEL]...

10
RQT7923
Cassette tapes – Play and record
Recording CDsRecording CDs
1Insert the cassette to be recorded on.
BBInsert inside the 
guides
Forward side
2Press [CD 6] and then [STOP 7, –DEMO].
3Press [0 OPEN/CLOSE] to insert the CD.
Press again to close.
4Press [PLAY MODE] to select your desired mode 
(refer page 7).
5Press [¶/8 REC] to start recording.
Recording programmed tracksRecording programmed tracks
1Program the tracks you want (refer page 8).
2Press [¶/8 REC] to start recording.
Other basic...