Panasonic Cd Stereo System Sc-pm28 Operating Instructions

							RQT6885
11
Listening operations
The radio: preset tuning
By remote control only
There are two methods of pre-setting stations.
Automatic presetting:All the stations the tuner can
receive are preset.
Manual presetting:You can select the stations to pre-
set and the order they are preset
in.
Up to 15 stations each can be set in the FM and AM bands.
Preparation:
Press [TUNER/BAND] to select ÒFMÓ or  ÒAMÓ.
AAutomatic pre-setting
Do the following once each for FM and AM.
Preparation:
Tune to the frequency where pre-setting is to begin (\ page
10).
Press and hold [PROGRAM].
The tuner presets all the stations it can receive into the
channels in ascending order.  When finished, the last station
memorized is tuned in.
    Manual pre-setting
Pre-set the stations one at a time.
1Press [PROGRAM] then press [g 
4 44 4
4/REW]
or [f 
3 33 3
3/FF] to tune to the required station.
2Press [PROGRAM] then press [g 
4 44 4
4/REW]
or [f 
3 33 3
3/FF] to select a channel.
3Press [PROGRAM].
The station occupying a channel is erased if another station
is preset in that channel.
BSelecting channels
1Press the numeric buttons to select the
channel.
For channels 1 to 9, press the corresponding number.
For channels 10 to 15, press [
10], then the two digits.
OR
1Press [PLAY MODE] to select ÒPRESETÓ.
2Press [g
4 44 4
4/REW] or [f
3 33 3
3/FF] to
select the channel.
2Adjust the volume.
A
B
1
2
/ REW/FF ,
TUNER/BAND
CD
REWFFFF
CLEAR
CLEAR
ALBUM
12 3
45
6
78 9
TAPE TUNER BAND
010
VOLVOLAUX
ABCDEF
GHIJKL
MNO
TUVWXYZ
PQRS
ENTER DISC
SEARCH MARKERINTRO INTRO
REPEA
REPEAT
DIMMER DISPLAY
RE-MASTERMU
MUTING
INGSOUNDS.SOUND EQ
S.SOUND EQ
PLAY
RECSLEEP AUTO OFF
SHIFT SHIFTTITLE
CLOCK TIMER
PROGRAM
PROGRAM
DEL DEL
SPACEPLA
PLAY MODE
Y MODEPROGRAM
/ REW/FF ,
CD
REWFFFF
CLEAR
CLEAR
ALBUM
12 3
45
6
78 9
TAPE TUNER BAND
010
VOLVOLAUX
ABCDEF
GHIJKL
MNO
TUVWXYZ
PQRS
ENTER DISC
SEARCH MARKERINTRO INTRO
REPEA
REPEAT
DIMMER DISPLAY
RE-MASTERMU
MUTING
INGSOUNDS.SOUND EQ
S.SOUND EQ
PLAY
RECSLEEP AUTO OFF
SHIFT SHIFTTITLE
CLOCK TIMER
PROGRAM
PROGRAM
DEL DEL
SPACEPLA
PLAY MODE
Y MODEPLAY MODE1
2
12 3
45
6
78 9
0
10
ABCDEF
GHIJKL
MNO
TUVWXYZ
PQRS
SPACE
PROGRAM
VOLVOL
RQT6885(11-15)new2.P653/24/05, 3:19 PM 11 
						

							RQT6885
12
Listening operations
CDs
This unit can play WMA, MP3 and CD-DA (digital audio)
format audio CD-R and CD-RW that have been finalized
(a process that enables CD-R/CD-RW players to play
audio CD-R and CD-RW) upon completion of recording.
It may not be able to play some CD-R or CD-RW due to the
condition of the recording.
The unit contains five CD trays.
You can simply listen to the CD on a single tray, or you
can select and listen to the CD in a particular tray. See
the section on All-Disc play (\ page 14) for information
on how to listen to all the CDs one after the next.
Listening to the CD on a single tray
1Press [c OPEN/CLOSE] to open the disc tray
and insert the CD.
The unit comes on automatically and tray 1 opens.
Press [c OPEN/CLOSE] again to close the tray.
2Press [CD 2/ J] to start play.
The selected CD is played from the first track to the last
track in order. After the last track, the player stops
automatically.
3Adjust the volume.
To stop the disc
Press [STOP L, –DEMO].
To pause play
Press [CD 2/J]. Press [CD 2/J] again to resume play.
Skipping tracks
Press [g 
4 44 4
4/REW] (backward) or [f 
3 33 3
3/FF ] (forward).
Searching through tracks
During play or pause
Press and hold [g 
4 44 4
4/REW] (backward) or [f 
3 33 3
3/FF]
(forward).
CD indicator
The CD indicator on the display lights whenever the tray is
in the playing position whether it is loaded or not.
One touch play
If the unit is in standby mode and a CD is loaded, press
[CD 2/J] or [CD 1] ~ [CD 5].
The unit will come on automatically and play will start.
ACD selection and care
With this system, you can only play CDs having this mark. (a)
Do not;
• use irregularly shaped CDs. (b)
• attach extra labels and stickers.
• use CDs with labels and stickers that are coming off or
with adhesive exuding from under labels and stickers. (c)
• attach scratch-proof covers or any other kind of accessory.
• write anything on the CD.
• clean CDs with liquids.  (Wipe with a soft, dry cloth.)
• use CDs printed with label printers available on the
market.
To prevent damage
Always observe the following points.
• Set the system on a flat, level surface.
Do not set it on top of magazines, inclined surfaces, etc.
• Do not move the system while tray is opening/closing, or
when loaded. Always unload all CDs before moving the
system.
• Do not put anything except a CD in the tray.
• Do not use cleaning CDs or CDs which are badly warped
or cracked.
• Do not disconnect the power cord from the household AC
outlet during CD changing operation.A
1
2
3
DOWNDOWN
VOLUMEVOLUME
UPUP
a
b
c
OPEN/CLOSEOPEN/CLOSE
2
13
(CD 1) ~ (CD 5)
/REW/FF,
DEMO STOP,
CDCDCD indicator
Elapsed play time Disc tray Label must face upward.
Track number
RQT6885(11-15)new2.P6512/30/02, 5:28 PM 12 
						

							RQT6885
13
Listening operations
12
3
4
A
DOWN
VOLUME
VOLUME
UP
CD CHECK
CD CHANGECHANGE
CD CHECK
CD 1 CD 2 CD 3 CD 4 CD 5
CD 1 CD 2 CD 3 CD 4 CD 5
1
DEMOSTOP,
CD CHECK
2  3
CD/
1 
4
CD indicator
CDs
Listening to a CD placed in a specific 
tray
Preparation:
 Press [CD 2/J ] and then [STOP  L, –DEMO].
Selecting the desired tray number and placing 
a CD in it
1Press [ c CD CHANGE].
2Within about 10 seconds
Press [CD 1] – [CD 5] to open the tray and 
insert the CD.
Press [ c CD CHANGE] again to close the tray.
Repeat steps 1 and 2 to insert other CDs. You can load 
up to 5 CDs.
Listening to the CD placed in a specific tray
3Press [CD 1] – [CD 5] to start play.
The selected CD is played from the first track to the last 
track in order. After the last track, the player stops auto- 
matically.
4Adjust the volume.
To remove the CD 
While one CD is playing (except in All-Disc Random play or
program play), you can change the CDs in the other trays. 
1  Press [ c CD CHANGE].
2  Press [CD 1] – [CD 5].
Press [ c CD CHANGE] again to close the tray.
 ATo check which tray the CD is in (CD CHECK)
The CD check feature lets you check whether a 12cm CD is 
in a tray. 
Press [CD CHECK].
If the player is stopped, all trays will open. 
If a CD is being played, the corresponding tray will not open. 
Press [CD CHECK] again to close the trays. 
• Do not remove or insert CDs during a CD check. 
• Do not pull out the trays during a CD check.
Elapsed play time
Track number Disc tray
Label must face upward.
Tray
number
RQT6885(11-15)new2.P65 1/14/03, 11:55 AM
13
CD
DOWN 
						

							RQT6885
14
Listening operations
CDs
Listening to specific CDs and tracks
(CD Play Mode function)
By remote control only
This function makes it easier for you to select specific CDs
and tracks from those loaded in the player.
There are 5 disc/track selection modes.
All-Disc  mode : Plays all loaded discs in succession
from the selected disc to the final
disc 
.
1-Track  mode : Plays one selected track on the se-
lected disc.
1-Disc Random mode : Plays one selected disc in random
order.
All-Disc Random mode : Plays all loaded discs in random
order.
1-Disc mode : Plays one selected disc.
1Press [CD 2/J] and then [L CLEAR].
2Press [PLAY MODE] to select the desired
mode.
Every time you press the button:
ALL-DISC 1-RANDOM1-TRACK A-RANDOM
1-DISC
ALL-DISC : All-Disc mode
1-TRACK : 1-Track mode
1-RANDOM : 1-Disc Random mode
A-RANDOM : All-Disc Random mode
1-DISC : 1-Disc mode
(The original display is restored in about 2 seconds.)
Proceed to step 5 if A-RANDOM was selected in this step.
3Press [DISC] (Within 10 seconds) and press
[1]-[5] to select the disc.
The CD starts if 1-DISC, ALL-DISC or 1-RANDOM was
selected in step 2.
4Only when you selected “1-TRACK” in step 2
Select the track with the numbered buttons.To select a track 10 or over, press [10] then the two
digits. Play starts from the selected track.
5Only when you selected “A-RANDOM” in step 2
Press [CD 2/J].The CD starts.
To stop play
Press [L CLEAR].
When playback ends
The current play mode will be retained.
 Final disc
For example, if play starts from disc 4, disc 3 will be the “final
disc”.
Order of progression:
Disc 4z5z1z2z3
Note
• You can use the CD Play Mode function together with repeat
play.
• During 1-Disc Random play or All-Disc Random play, you
cannot skip to tracks which have already been played.
• During 1-Disc Random play or All-Disc Random play, you
can search forward or backward only within the current
track.
1
2
5 3
412 3
45
6
78 9
0
10
ABCDEF
GHIJKL
MNO
TUVWXYZ
PQRS
SPACE
CDCDCLEARCLEAR
DISCDISC
CDCD
REWFF
CLEAR
ALBUMALBUM
12 3
45
6
78 9
TAPE TUNER BAND
010
VOLVOLVOLVOLAUX
ABCDEF
GHIJKL
MNO
TUVWXYZ
PQRS
ENTERENTER
DISCDISC
SEARCHSEARCHMARKERMARKERINTROINTRO
REPEAREPEAT
DIMMERDIMMERDISPLADISPLAY
RE-MASTERMUMUTINGINGSOUNDS.SOUND EQS.SOUND EQ
PLAY
RECRECSLEEPSLEEPAUTO OFFAUTO OFF
SHIFTSHIFTTITLETITLE
CLCLOCKCK TIMER TIMER
PROGRAMPROGRAM
DELDELSPACEPLAPLAY MODEY MODE4
15
1
2
3
PLAY MODEPLAY MODE
12 3
45
ABCDEF
GHIJKL
CDCD
Specified disc indicator
RQT6885(11-15)new2.P651/14/03, 11:55 AM 14 
						

							RQT6885
15
Listening operations
CDs
Direct access play
By remote control only
Direct access allows you to start normal play from a specific
track to the last track of the CD.
1Press [DISC].
2(within 10 seconds or so)
Press [1] – [5] to select the disc you want.
3Press the numeric button(s) to select the
desired track number.
Play will start with the track you select.
To select a two-digit track
Press [10] and then the two numbers you want.
For example
Track no. 20: [
10]→[2]→[0]
Track no. 35: [
10]→[3]→[5]
Note
You cannot use direct access play with 1-RANDOM or
A-RANDOM mode.
Repeat play
By remote control only
 APress [REPEAT] before or during play.
“REPEAT ON” and “” are displayed.
To cancel repeat play
Press [REPEAT] once again. “REPEAT OFF” is displayed
and “
” is cleared.
To repeat your favorite tracks
1. Program the tracks you want (perform steps 1 ~ 6 on
page 16.)
2. Press [REPEAT] and make sure “REPEAT ON” and “
”
are displayed.
3. Press [CD 2/J]. Playback will start.
To use repeat play with CD Play Mode function
Set the desired mode (A page 14), press [REPEAT] before
or during playback, and make sure “REPEAT ON” and “
”
are displayed.
BCD display
By remote control only
This function allows you to display the remaining play time
of the current track.
During play or pause mode
Press [DISPLAY].
Every time you press the button:
Elapsed play time ↔ Remaining play time
Note
When track number 25 or greater is playing, remaining play
time display shows “– –:– – ”.
A
B
1
2
3
12 3
45
ABCABCDEFDEF
GHIGHIJKLJKL
CLOCK/CLOCK/TIMERTIMERDISPLAYDISPLAY
CDCD
REWFF
CLEARCLEAR
ALBUMALBUM
12 3
45
6
78 9
TAPEAPETUNER TUNER BANDBAND
010
VOLVOLVOLVOLAUXAUX
ABCABCDEFDEFGHIGHIJKLJKLMNOMNOTUVTUVWXYZWXYZPQRSPQRS
ENTERENTER
DISCDISC
SEARCHSEARCHMARKERMARKERINTROINTRO
REPEAT
DIMMERDIMMERDISPLADISPLAY
RE-MASTERRE-MASTERMUMUTINGSOUNDSOUNDS.SOUND EQ
PLAY
RECRECSLEEPSLEEPAUTO OFFAUTO OFF
SHIFTSHIFTTITLE
CLCLOCKCK TIMER TIMER
PROGRAM
DEL
SPSPACEACEPLAY MODE
REPEAT
3
2
1
CD DISPLAY/
DISCDISC
12 3
45
6
78 9
0
10
ABCABCDEFDEF
GHIGHIJKLJKLMNOMNO
TUVTUVWXYZWXYZPQRSPQRS
SPSPACEACE
REPEATREPEAT
Remaining play time
RQT6885(11-15)new2.P651/27/03, 5:05 PM 15 
						

							RQT6885
16
Listening operations
A
B
1
2
5
CDCD7 3
4
CDCDCLEARCLEAR
PROGRAMPROGRAM
DISC
12 3
45
ABCDEF
GHIJKL
12 3
45
6
78 9
0
10
ABCDEF
GHIJKL
MNO
TUVWXYZ
PQRS
SPACE
CDCD
REWFF
CLEAR
ALBUMALBUM
12 3
45
6
78 9
TAPE TUNER BAND
010
VOLVOLVOLVOLAUX
ABCDEF
GHIJKL
MNO
TUVWXYZ
PQRS
ENTERENTER
DISCDISC
SEARCHSEARCHMARKERMARKERINTROINTRO
REPEAREPEAT
DIMMERDIMMERDISPLADISPLAY
RE-MASTERMUMUTINGINGSOUNDS.SOUND EQS.SOUND EQ
PLAY
RECRECSLEEPSLEEPAUTO OFFAUTO OFF
SHIFTSHIFTTITLETITLE
CLCLOCKCK TIMER TIMER
PROGRAMPROGRAM
DELDELSPACEPLAPLAY MODEY MODE5
4
1  7
1
3
2
/REW,/FF
DEL
CDs
Program play
By remote control only
This function allows you to program up to 24 tracks.
1Press [CD 2/ J] and then [L CLEAR].
2Press [PROGRAM].
3Press [DISC].
4(within 10 seconds or so)
Press [1] – [5] to select the disc you want.
5Press the numeric button(s) to select the
track you want to play in the desired
sequence.
6Repeat steps 3 through 5 until you have
programmed all the tracks you want.
7Press [CD 2/ J].
Play will start in the programmed sequence.
To cancel program play mode
Press [PROGRAM] in the stop mode.
Programmed contents will be saved in memory.
To clear the last track
Press [DEL].
To clear all programmed tracks
Press [L CLEAR].
“CLEAR ALL ?” is displayed.
Within 5 seconds, press the button again to clear all tracks.
To select a two-digit track
Press [
10] and then the two numbers you want.
 AWhen “CD FULL” appears
The number of programmed tracks is limited to 24. No
further tracks can be programmed.
 BYou can do the following during program mode:
• Check  program contents.
Press [g 
4 44 4
4/REW ] or [f 
3 33 3
3/FF].
Every time you press one of the buttons, the track and
program No. are shown on the display.
• Add to the program.
Repeat steps 3 through 5.
Memory retention
Your program is retained in memory for about 1 week while
the system is unplugged.
To replay your program
If you turned OFF your program with [PROGRAM], you can
play it again as explained below.
1. Press [PROGRAM].
2. Press [CD 2/ J].
If you program a track not on your CDs
The track is initially programmed, but during program play,
the player will skip that track and will continue playing from
the next programmed item.
Note
• During program play, you can search forward or backward
only within the current track.
• During program play, skipping is always in the programmed
order, whether forward or backward.
• You can use repeat mode with program play.
• You cannot program CD-DA together with MP3/WMA
tracks.
To mark a track
See page 22.Indicates program mode
Specified track
number
Program
order
RQT6885(16-21)new2.P651/27/03, 5:06 PM 16 
						

							RQT6885
17
Listening operations
This unit can play MP3 and WMA files recorded on CD-R/
RW with a computer.
Files are treated as tracks and folders are treated as albums.
This unit can access up to 999 tracks, 255 albums and 20
sessions.
When making MP3/WMA files to play on this
unit
Disc format
Discs must conform to ISO9660 level 1 or 2 (except for
extended formats).
File format
• MP3 files must have the extension “.MP3” or “.mp3”.
• WMA files must have the extension “.WMA” or “.wma”.
To play in a certain order
Prefix the folder and file names with 3-digits numbers in the
order you want to play them.
Files may not be recorded in numbered order if the prefixes
have different numbers of digits.
For example: 1????.mp3, 2????.mp3, 10????.mp3.
However, some writing software may also cause recording
to occur in a different order.
MPEG Layer-3 audio decoding technology licensed from
Fraunhofer IIS and Thomson multimedia.
Windows Media, and the
Windows logo are trademarks,
or registered trademarks of
Microsoft Corporation in the
United States and/or other
countries.
WMA is a compression format
developed by Microsoft Corpo-
ration. It achieves the same
sound quality as MP3 with a
file size that is smaller than that
of MP3.
Note
• When creating a WMA disc, ensure the copyright feature
is off.
• Noise may occur when playing WMA files.
Limitations on MP3/WMA play
•This unit is not compatible with packet-write format.
•When both MP3/WMA and CD-DA data is recorded on the
disc over a number of sessions:
•If the first session contains MP3/WMA recordings, the unit
will play from the MP3/WMA made in that session till the
session before the first CD-DA recordings.
•If the first session contains CD-DA recordings, the unit will
play only the recordings made in that session. The
subsequent sessions will be ignored.
•You cannot use 1-Disc Random play, All-Disc Random play
and search function.
•Some MP3/WMA may not be played due to the condition of
the disc or recording.
•Recordings will not necessarily be played in the order you
recorded them.
L Display when in the stop mode (example)
File format indicator
“MP3”: Indicates the disc contains MP3 files
“WMA”: Indicates the disc contains WMA files
If the disc contains both MP3 and WMA files, both “MP3”
and “WMA” will light up.
How discs with MP3/WMA differ
from CDs
001
002
003
001????.mp3
002????.mp3
003????.mp3
001????.mp3
002????.mp3
003????.mp3
004????.mp3
001????.mp3
002????.mp3
003????.mp3
Example: MP3
root
RQT6885(16-21)new2.P651/27/03, 5:06 PM 17 
						

							RQT6885
18
Listening operations
CD
REWFF
CLEARCLEAR
ALBUMALBUM
12 3
45
6
78 9
TAPEAPETUNER TUNER BANDBAND
010
VOLVOLVOLVOLAUX
ABCABCDEFDEFGHIGHIJKLJKLMNOMNOTUVTUVWXYZWXYZPQRSPQRS
ENTERENTER
DISCDISC
SEARCHSEARCHMARKERMARKERINTRO
REPEAREPEAT
DIMMERDIMMERDISPLADISPLAY
RE-MASTERRE-MASTERMUMUTINGINGSOUNDSOUNDS.SOUND EQS.SOUND EQ
PLAY
RECRECSLEEPSLEEPAUTO OFFAUTO OFF
SHIFTSHIFTTITLETITLE
CLCLOCKCK TIMER TIMER
PROGRAMPROGRAM
DELDELSPSPACEACEPLAPLAY MODEY MODE
/ REW/FF,
ALBUM
(     or     )
TRACK SKIP ALBUM SKIP
ALBUM SKIPALBUM SKIP
TRACK SKIPTRACK SKIP
1
2
CDCD
REWFF
CLEARCLEAR
ALBUMALBUM
12 3
45
6
78 9
TAPE TUNER BAND
010
VOLVOLVOLVOLAUXAUX
ABCDEF
GHIJKL
MNO
TUVWXYZ
PQRS
ENTERENTER
DISCDISC
SEARCHSEARCHMARKERMARKERINTROINTRO
REPEAREPEAT
DIMMERDIMMERDISPLADISPLAY
RE-MASTERMUMUTINGINGSOUNDS.SOUND EQS.SOUND EQ
PLAY
RECRECSLEEPSLEEPAUTO OFFAUTO OFF
SHIFTSHIFTTITLETITLE
CLCLOCKCK TIMER TIMER
PROGRAMPROGRAM
DELDELSPACEPLAPLAY MODEY MODE
1
12 3
45
6
78 9
0
10
ABCABCDEFDEF
GHIGHIJKLJKLMNOMNO
TUVTUVWXYZWXYZPQRSPQRS
SPSPACEACE
1  2
ALBUMALBUM
Current
albumNumber of tracks
in current album
Current
albumCurrent track
How discs with MP3/WMA differ from CDs
Album skip play
During play or stop
Push the jog control up/down [,,
ALBUM SKIP] to select the desired album.
Remote control: Press [ALBUM ( or )].
When selecting in the stop mode:
Press [CD 2/ J] to start play.
Play starts from the first track of the selected album.
To play from another track, refer to “Track skip play” below.
Track skip play
During play or stopPush the jog control up/down [,,
TRACK SKIP] to select a desired track. 
(You can
also press [g 
4 44 4
4/REW ] or [f 
3 33 3
3/FF].)
Remote control: Press [g 
4 44 4
4/REW ] or [f 
3 33 3
3/FF].
When selecting in the stop mode:
Press [CD 2/ J] to start play.
Play starts from the selected track.
To play from another album, refer to “Album skip play”
above.
Note
During 1-ALBUM mode, track skipping can only be done
within the current album.
Starting play from a desired track in a
desired album
By remote control only
Preparation: Press [ CD 2/ J] and then [L CLEAR].
1Press [ALBUM ( or )] and then the numbered
buttons to select the album.
To select album 10 or over, press [10] once then the
two digits.
To select album 100 or over, press [
10] twice then the
three digits.
Play starts from the first track of the selected album.
2Press the numbered buttons to select the track
in the current album.
To select track 10 or over, press [10] once then the two
digits.
To select track 100 or over, press [
10] twice then the
three digits.
Play starts from the selected track.
RQT6885(16-21)new2.P6512/30/02, 5:36 PM 18 
						

							RQT6885
19
Listening operations
A
1
2
1
2
B
3
4
CDCD
REWFF
CLEARCLEAR
ALBUMALBUM
12 3
45
6
78 9
TAPEAPETUNER TUNER BANDBAND
010
VOLVOLVOLVOLAUXAUX
ABCABCDEFDEFGHIGHIJKLJKLMNOMNOTUVTUVWXYZWXYZPQRSPQRS
ENTERENTER
DISCDISC
SEARCHSEARCHMARKERMARKERINTROINTRO
REPEAT
DIMMERDIMMERDISPLADISPLAY
RE-MASTERRE-MASTERMUTINGSOUNDSOUNDS.SOUND EQ
PLAY
RECRECSLEEPSLEEPAUTO OFFAUTO OFF
SHIFTSHIFTTITLE
CLCLOCKCK TIMER TIMER
PROGRAM
DEL
SPSPACEACEPLAY MODE
2
1
CDCD
REWFF
CLEARCLEAR
ALBUMALBUM
12 3
45
6
78 9
TAPEAPETUNER TUNER BANDBAND
010
VOLVOLVOLVOLAUXAUX
ABCABCDEFDEFGHIGHIJKLJKLMNOMNOTUVTUVWXYZWXYZPQRSPQRS
ENTERENTER
DISCDISC
SEARCHSEARCHMARKERMARKERINTROINTRO
REPEAT
DIMMERDIMMERDISPLADISPLAY
RE-MASTERRE-MASTERMUTINGSOUNDSOUNDS.SOUND EQ
PLAY
RECRECSLEEPSLEEPAUTO OFFAUTO OFF
SHIFTSHIFTTITLE
CLCLOCKCK TIMER TIMER
PROGRAM
DEL
SPSPACEACEPLAY MODE4
2
3
2
1
CD
INTRO
12 3
45
ABCABCDEFDEF
GHIGHIJKLJKL
12 3
45
6
78 9
0
10
ABCABCDEFDEF
GHIGHIJKLJKLMNOMNO
TUVTUVWXYZWXYZPQRSPQRS
SPSPACEACE
PLAY MODE
DISC
ALBUM
AINTRO function (Album scan)
You can find an album by listening to the first track of all albums
in the current disc for 10 seconds each.
1Press [INTRO].INTRO function starts.
(INTRO function is cancelled after playing the first track
in the last album on the current disc.)
2While your desired album is playing, press
[CD 2/ J].
Play continues from the first track of the album.
To stop during the process, press [INTRO].
BCD Play Mode function for MP3/WMA
1Press [PLAY MODE] to select the desired mode.
Every time you press the button:
ALL-DISC → 1-TRACK → 1-ALBUM
1-DISC
 ←
ALL-DISC: Plays all loaded discs in succession from
the selected disc to the final disc 
.
1-TRACK:Plays one selected track on the selected disc.
1-ALBUM:Plays one selected album on the selected disc.
1-DISC: Plays one selected disc.
(The original display is restored in about 2 seconds.)
2Press [DISC] and (within 10 seconds) [1]–[5] to
select the disc.
The CD starts.
3When you selected “1-ALBUM” or “1-TRACK” in step 1Press [ALBUM ( or )] to select the album.
Play starts from the first track of the selected album.
4When you selected “1-TRACK” in step 1Press the numbered buttons to select the track
in the current album.
To select track 10 or over, press [10] once then the two
digits.
To select track 100 or over, press [
10] twice then the
three digits.
Play starts from the selected track.
To stop play
Press [L CLEAR].
When playback ends
The current play mode will be retained in memory until it is
changed even if the unit is turned off.
 Final disc
For example, if play starts from disc 4, disc 3 will be the “final disc”.
Order of progression: Disc 4z5z1z2z3
LWhen “NOT MP3/ERROR1” appears on the display
An unsupported MP3 format is being played. The unit will
skip that track and play the next one.
LWhen “TRACK/PROTECTED” appears on the display
A copyright protected WMA format is being played. The unit
will skip that track and play the next one.
Note
•You can use repeat mode (\ page 15) with CD Play Mode
function.
•You cannot use program mode together with CD Play Mode
function.
→
By remote control only
Preparation: Press [ CD 2/ J] and then [L CLEAR].
How discs with MP3/WMA differ from CDs
RQT6885(16-21)new2.P651/14/03, 11:56 AM 19 
						

							RQT6885
20
Listening operations
1
2
A
CLEAR
REWREWFFFF3
4
5
CD
REWFF
CLEAR
ALBUMALBUM
12 3
45
6
78 9
TAPE TUNER BAND
010
VOLVOLVOLVOLAUX
ABCDEF
GHIJKL
MNO
TUVWXYZ
PQRS
ENTERENTER
DISCDISC
SEARCHSEARCHMARKERMARKERINTROINTRO
REPEAREPEAT
DIMMERDIMMERDISPLADISPLAY
RE-MASTERMUMUTINGINGSOUNDS.SOUND EQS.SOUND EQ
PLAY
RECRECSLEEPSLEEPAUTO OFFAUTO OFF
SHIFTSHIFTTITLETITLE
CLCLOCKCK TIMER TIMER
PROGRAMPROGRAM
DELDELSPACEPLAPLAY MODEY MODE
5
4
3
2
DEL
1
PROGRAMPROGRAM
ENTERENTER
2  3
ALBUMALBUM
CDCD
Program play for MP3/WMA
You can program up to 24 tracks.
By remote control only
Preparation:
1. Press [DISC] and (within 10 seconds) [1]–[5] to select the disc.
2. Press [L CLEAR].
1Press [PROGRAM].
“PGM” appears.
2Press [ALBUM ( or )] to select the album.
To select an album directly, press the numbered
buttons after pressing [ALBUM ( or )].
To select album 10 or over, press [
10] once then the
two digits.
To select album 100 or over, press [
10] twice then the
three digits.
3Press [      
 g 
4 44 4
4/REW] or [f 
3 33 3
3/FF] to select the
track.
To select a track directly, press the numbered buttons
after pressing [
      
 g 
4 44 4
4/REW] or [f 
3 33 3
3/FF].
To select track 10 or over, press [
10] once then the two
digits.
To select track 100 or over, press [
10] twice then the
three digits.
4Press [ENTER].
Repeat steps 2~4 to program other tracks.
5Press [CD 
2 22 2
2/      
 J JJ J
J] to start play.
To exit program modePress [PROGRAM] in the stop mode. (You can replay your
program by pressing [PROGRAM] then [CD 2/J].)
 AYou can do the following while “PGM” is displayed
•To check program contents
Press [g 
4 44 4
4/REW] or [f 
3 33 3
3/FF].
Every time you press the button, the album number, track
number and program order are displayed.
•To add to the program
Do steps 2~4.
•To clear the last track
Press [DEL].
•To clear all tracks
Press [L CLEAR].
“CLEAR ALL?” is displayed.
Within 5 seconds, press the button again to clear all tracks.
Note
•You can use repeat mode (\ page 15) with program play.
•You cannot program more than one CD for MP3/WMA.
•You cannot program CD-DA together with MP3/WMA
tracks.
•The program memory is cleared when you change a disc
or open the CD tray.
How discs with MP3/WMA differ from CDs
RQT6885(16-21)new2.P651/14/03, 11:56 AM 20