Panasonic Cd Stereo System Sc-pm18, Sc-pm16 Operating Instructions

							RQT6683-2P
Model No. SC-PM18
SC-PM16 CD Stereo System
Operating Instructions
PPC
Before connecting, operating or adjusting this product, please read these
instructions completely.
Please keep this manual for future reference.
SC-PM16 is available in the U.S.A. only.
RQT6683(Cov).p653/24/03, 9:24 AM 1 
						

							RQT6683
2
Before use
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these
instructions carefully.
These operating instructions are applicable to the following
systems.
Table of contents
Before use
Supplied accessories ................................................. 3
IMPORTANT SAFETY INSTRUCTIONS ..................... 4
Listening caution ........................................................ 5
Placement of speakers ............................................... 5
The remote control ..................................................... 5
Connections ................................................................ 6
Front panel controls ................................................... 8
Listening operations
The radio: manual tuning ........................................... 10
The radio: preset tuning ............................................. 11
CDs ............................................................................... 12
Cassette tapes ............................................................. 17
Recording operations
Before recording ......................................................... 18
Recording from the radio ........................................... 19
Recording CDs ............................................................ 19
Timers and others
Using the built-in sound quality settings ................. 20
Enhancing the sound quality ..................................... 20
Using an external unit ................................................ 20
Auto-off function ......................................................... 21
Turning the demo function off ................................... 21
Setting the time ........................................................... 22
Convenient functions ................................................. 22
Using the timers .......................................................... 23
Reference
Troubleshooting guide ................................................. 25
Warranty (ONLY FOR U.S.A.) ....................................... 26
Specifications ................................................................ 27
Product Service .............................................. Back cover
Maintenance ................................................... Back cover
When moving the unit ................................... Back cover
User memo:
DATE OF PURCHASE
DEALER NAME
DEALER ADDRESS
TELEPHONE NUMBER
CAUTION:
TO PREVENT ELECTRIC SHOCK MATCH
WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK OR PRODUCT DAMAGE, DO NOT
EXPOSE THIS APPARATUS TO RAIN,
MOISTURE, DRIPPING OR SPLASHING AND
THAT NO OBJECTS FILLED WITH LIQUIDS,
SUCH AS VASES, SHALL BE PLACED ON
THE APPARATUS.
The model number and serial number of this product can
be found on either the back or the bottom of the unit.
Please note them in the space provided below and keep
for future reference.
MODEL NUMBER
SERIAL NUMBER
CAUTION!
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR
YOURSELF. REFER SERVICING TO QUALIFIED
PERSONNEL.
CAUTION!
DO NOT INSTALL OR PLACE THIS UNIT IN A
BOOKCASE, BUILT-IN CABINET OR IN ANOTHER
CONFINED SPACE. ENSURE THE UNIT IS WELL
VENTILATED. TO PREVENT RISK OF ELECTRIC
SHOCK OR FIRE HAZARD DUE TO OVERHEATING,
ENSURE THAT CURTAINS AND ANY OTHER MATE-
RIALS DO NOT OBSTRUCT THE VENTILATION
VENTS.
System SC-PM18 SC-PM16
Main unit SA-PM18 SA-PM16
Speakers SB-PM18 SB-PM18
RQT6683(2-10)new.P651/23/03, 4:42 PM 2 
						

							RQT6683
3
Before use
Please check and identify the supplied
accessories.
Use numbers indicated in parentheses
when asking for replacement parts.
(Only for U.S.A.)
To       order       accessories       contact
1-800-332-5368 or web site
(http://www.panasonic.com).
Supplied accessories
AC power supply cord ...................................... 1 pc.
(K2CB2CB00006)
FM indoor antenna ............................................ 1 pc.
(RSA0006-L)
AM loop antenna ............................................... 1 pc.
(RSA0033A-1)
Remote control transmitter .............................. 1 pc.
(EUR7711020)
Remote control batteries ................................ 2 pcs.
R6, AA, UM-3
The lightning flash with arrowhead symbol, 
within an equilateral triangle, is intended to 
alert the user to the presence of uninsulated 
dangerous voltage  within the product s 
enclosure that may be of sufficient 
magnitude to constitute a risk of electric 
shock to persons. CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS
INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The exclamation point within an equilateral 
triangle is intended to alert the user to the 
presence of important operating and 
maintenance (servicing) instructions in the 
literature accompanying the appliance.
CAUTION:
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation. If this equipment
does cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
¥ Reorient or relocate the receiving antenna.
¥ Increase the separation between the equipment and
receiver.
¥ Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
¥ Consult the dealer or an experienced radio/TV
technician for help.
Any unauthorized changes or modifications to this
equipment would void the userÕs authority to operate
this device.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation. THE FOLLOWING APPLIES ONLY IN THE U.S.A.
RQT6683(2-10)new.P653/24/05, 5:43 PM 3 
						

							RQT6683
4
Before use
 IMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable
safety instructions listed below. Keep these operating instructions handy for future reference.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding-type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.10) Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11) Only use attachments/accessories specified by the
manufacturer.
12) Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when
unused for long periods of time.
14) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally,
or has been dropped.
Except for U.S.A.
Inside of product
RQT6683(2-10)new.P653/24/03, 9:26 AM 4 
						

							RQT6683
5
Before use
The remote control
Battery installation
Use of batteries
¥ Align the poles (+ and Ð) properly when inserting the
batteries.
¥ Do not mix old and new batteries or different types of
batteries.
¥ Do not recharge ordinary dry cell batteries.
¥ Do not heat or disassemble the batteries. Do not allow
them to contact flame or water.
¥ Remove the batteries if the unit is not to be used for a long
time.
¥ Do not keep together with metallic objects such as
necklaces.
¥ Do not use rechargeable type batteries.
¥ Do not use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage
which can damage items the fluid contacts and may cause a
fire.
If electrolyte leaks from the batteries, consult your dealer.
Wash thoroughly with water if electrolyte comes in contact
with any part of your body.
Correct method of use
Operation notes
¥ Do not place obstacles between the remote control signal
sensor and remote control unit.
¥ Do not expose the remote control signal sensor to direct
sunlight or to the bright light of a fluorescent light.
¥ Take care to keep the remote control signal sensor and the
end of the remote control unit free from dust.
¥ If this system is installed in a rack with glass doors, the
glass doorsÕ thickness or color might make it necessary to
use the remote control unit a shorter distance from the
system.
To prevent damage
¥ Never place heavy items on top of the unit.
¥ Do not disassemble or reconstruct the unit.
¥ Do not spill water or other liquids into the unit.
Placement of speakers
Speakers are designed identically so that no left or right
channel orientation is necessary.
Notes
¥ Keep your speakers at least 10mm (13/32ý ) away from the
system for proper ventilation.
¥ These speakers do not have magnetic shielding. Do not
place them near televisions, personal computers or other
devices easily influenced by magnetism.
¥ To avoid damage to the speakers, do not touch the
speaker cones if you have taken the nets off. Selecting fine audio equipment such as the unit youÕve just
purchased is only the start of your musical enjoyment. Now
itÕs time to consider how you can maximize the fun and ex-
citement your equipment offers. This manufacturer and the
Electronic Industries AssociationÕs Consumer Electronics
Group want you to get the most out of your equipment by
playing it at a safe level. One that lets the sound come
through loud and clear without annoying blaring or distor-
tion Ñ and, most importantly, without affecting your sensi-
tive hearing.
We recommend that you avoid prolonged exposure to ex-
cessive noise.
Sound can be deceiving. Over time your hearing Òcomfort
levelÓ adapts to higher volumes of sound. So what sounds
ÒnormalÓ can actually be loud and harmful to your hearing.
Guard against this by setting your equipment at a safe
level BEFORE your hearing adapts.
To establish a safe level:
¥ Start your volume control at a low setting.
¥ Slowly increase the sound until you can hear it
comfortably and clearly, and without distortion.
Once you have established a comfortable sound level:
¥ Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing
damage or loss in the future. After all, we want you listen-
ing for a lifetime.
EST. 1924
Remote control
signal sensor
About 7 meters in
front of the signal
sensor. Transmission
windowR6, AA, UM-3
Listening caution
RQT6683(2-10)new.P653/24/05, 1:56 PM 5 
						

							RQT6683
6
Before use
Connections
¥ Plug the AC power supply cord into a household AC outlet
only after all other connections have been made.
¥ To prepare the AM loop antenna wire and speaker cords,
twist the vinyl cover tip and pull off.
1Connect the FM indoor antenna.
Tape the antenna to a wall or column, in a position
where radio signals are received with the least amount
of interference.
Note
For the best reception:
An FM outdoor antenna is recommended. (\ page 7)
2Connect the AM loop antenna.
Stand the antenna up on its base. Keep loose antenna
cord away from other wires and cords.
3Connect the speaker cords.
AConfirm the colors of the tags on the ends of the
cords.
BFor White tags:
Connect cords to gray terminals.
For Blue, Black and Red tags:
Connect cords so tag colors match the terminal
colors.
Cords with white and blue tags are for high frequency.
Cords with red and black tags are for low frequency.
Incorrect connection can damage the unit.
CautionUse only the supplied speakers.
The combination of the main unit and speakers provide
the best sound. Using other speakers can damage the
unit and sound quality will be negatively affected.
4Connect the AC power supply cord.
 Note
The included AC power supply cord  is for use with this
unit only.  Do not use it with other equipment.
Red (
» »» »
»)
Black (
á áá á
á) Black (
á áá á
á)Red (
» »» »
»)
1
2
3
AM loop antenna
Adhesive
tape
FM indoor
antenna
12
RL
LOW (6  ) HIGH (6  )
Blue (–)
Black (–)
Red (+) Gray (+)
White
Blue
Black
Red
A
B
1
2
1
3
2
1
2
3
4
Caution
¥Use the speakers only with the
recommended system. Failure to do
so may lead to damage to the
amplifier and/or the speakers, and
may result in the risk of fire.
Consult a qualified service person if
damage has occurred or if you
experience a sudden change in
performance.
¥Do not attach these speakers to walls
or ceilings.
(R)(L)
RQT6683(2-10)new.P653/24/05, 1:46 PM 6 
						

							RQT6683
7
Before use
Connections
Optional antenna connections
You may need an outdoor antenna if you use this system in
a mountainous region or inside a reinforced-concrete
building, etc.
FM outdoor antenna
Disconnect the FM indoor antenna if an FM outdoor
antenna is installed.
Note
An outdoor antenna should be installed by a qualified
technician only.
AM outdoor antenna
Connect the outdoor antenna without removing the AM loop
antenna. Run 5 to 12 m of vinyl-covered wire horizontally
along a window or other convenient location.
Note
When the unit is not in use, disconnect the outdoor antenna
to prevent possible damage that may be caused by
lightning. Never use an outdoor antenna during an electrical
storm.
External unit connections
¥ Make sure that the power supply for all components has
been turned off before making any connections.
¥ For details, refer to the operating instructions of the unit
which is to be connected.
¥ All peripheral components and cables sold separately.
Connecting analog equipment
This example shows how to connect an analog player with a
PHONO OUT/LINE OUT switch.
When units other than those described are to be connected,
please consult your audio dealer.
Note
¥ Only an analog player with a built-in phono equalizer can
be connected.
¥ Set the switch to the ÒLINE OUTÓ position at the back of
the analog player.
A
B
C
A
B
C
AUX (L) (R)
AM outdoor antenna
(not included)
AM loop antenna
(included)
Shield braid
Core wire
FM outdoor antenna
(not included)
5-12 m
(16-40 ft)
Analog player (not included)LINE OUT
position
Rear panel of this unit
LR
1
2
(1 3/16)
(
19/32)
RQT6683(2-10)new.P653/24/05, 1:44 PM 7 
						

							RQT6683
8
Before use
Front panel controls
Main unit
1
Cassette lid
2Cassette open button (c OPEN) ............................ 17
3AC supply indicator (AC IN)
This indicator lights when the unit is connected to the AC
mains supply.
4Standby/on switch (      
 POWER)
Press to switch the unit from on to standby mode or vice
versa. In standby mode, the unit is still consuming a
small amount of power.
5Aux button (AUX) ..................................................... 20
6CD skip/search, tape fast-forward/rewind/TPS, tune/
preset channel select, time adjust buttons
(f 
3 33 3
3/FF, g 
4 44 4
4/REW ) ................ 10, 11, 12, 17, 22
7CD check button (CD CHECK) ................................ 13
8CD trays
9Tape indicator
This indicator changes in the following manner:
a Orange (when no cassette is inserted.)
b Green (when cassette is inserted.)
c Red (when in recording mode.)
€Display
Recording start/pause button ([/ J REC) .............. 19
‚Super sound EQ button (S.SOUND EQ) ................. 20
ƒVolume control (VOLUME DOWN, UP) ....... 10, 12, 17
„CD tray open/close button (c OPEN/CLOSE) ....... 12
…CD change button (c CD CHANGE) ....................... 13
†Headphone jack (PHONES) ..................................... 20
‡Stop/program clear and demonstration button
(STOP L, –DEMO) ............................ 12, 16, 17, 19, 21
ˆTuner/band select button (TUNER/BAND) ............. 10
‰Cassette play button ( TAPE 2).............................. 17
ŠCD play/pause button ( CD 2/ J ) ............................. 12
‹Disc direct play buttons (CD 1~CD 5).................... 12
PHONES
REWFF
OPEN/CLOSE
CD CHANGECD CHECK
DEMO
DOWN
VOLUME
UP AUXREC
POWERAC IN
S.SOUND EQ
CD 1 CD 2 CD 3 CD 4 CD 5
STOPTUNER  BANDCDTA P E
DEMO
CD 1 CD 2 CD 3 CD 4 CD 5
STOPTUNER  BANDCDTA P E
)~+ ,
-
3
4
5
6
791
2
!

#
$
%
&
(
OPEN
8
RQT6683(2-10)new.P651/13/03, 4:19 PM 8 
						

							RQT6683
9
Before use
SLEEPCLOCK TIMERPLAY
RECAUTO OFF
DISC
PLAY MODE
MUTINGREW
S.SOUND EQ
S.SOUND EQDIMMERDISPLAYPRESET EQ
FF
123
46 5
789
PGM10
VOLVOL
CD
AUX TUNER/
BAND
BANDTAPE
0
CLEAR
4
~
5
#.
/
:
;
<
=>
?
@
[
\
]
,
+
$
6
Front panel controls
Remote Control
Buttons such as 4 function in exactly the same way as the
buttons on the main unit.
ŒSleep timer/auto off button
(SLEEP, ÐAUTO OFF) ........................................ 21, 24
Disc button (DISC) ................................................... 14
ŽPlay mode select button
(PLAY MODE) ......................................... 10, 14, 15, 19
Use this for selecting repeat mode, CD play mode, tune
mode, FM mode and AM beat proof function.
CD Program, tuner preset button (PGM) ......... 11, 16
Muting button (MUTING) ........................................  22
‘Preset EQ select button (PRESET EQ) .................  20
’Play timer/recording timer button
(
û ûû û
ûPLAY/ REC) ........................................................... 23
“Clock/timer button (CLOCK/TIMER) ........... 22, 23, 24
”Numeric buttons (10, 1Ð9, 0) ........................... 11, 15
•Stop/program clear button (L CLEAR) ...... 12, 16, 17
–Dimmer button (DIMMER) ....................................... 22
—Display button (DISPLAY) ....................................... 15
RQT6683(2-10)new.P653/24/05, 1:56 PM 9 
						

							RQT6683
10
Before use
The radio: manual tuning
1Press [TUNER/BAND] to select ÒFMÓ or ÒAMÓ.
The unit comes on automatically.
Every time you press the button:
FM « AM
2Press [PLAY MODE] on the remote control to
select ÒMANUALÓ.
Every time you press the button:
MANUAL « PRESET
3Press [g 
4 44 4
4/REW] or [f 
3 33 3
3/FF] to select
the frequency of the required station.
ÒSTÓ is displayed when a stereo FM broadcast is being
received.
4Adjust the volume.
Auto tuning
Press and hold [g 
4 44 4
4/REW ] or [ f 
3 33 3
3/FF] for a moment
until the frequency starts changing rapidly. The unit begins
auto tuning, stopping when it finds a station.
¥ Auto tuning may not function when there is excessive
interference.
¥ To cancel auto tuning, press [g 
4 44 4
4/REW] or [f 
3 33 3
3/FF ]
once again.
If noise is excessive in FM
By remote control only
Press and hold [PLAY MODE] to display
ÒMONOÓ.
This mode improves sound quality if reception is weak, but
broadcasts will be heard in monaural.
Press and hold [PLAY MODE] again to cancel the mode.
ÒMONOÓ goes out. MONO is also cancelled if the frequency
is changed.
Turn off ÒMONOÓ for normal listening. Stereo and monaural
broadcasts are automatically played as they are received.
FM allocation setting
By main unit only
By adjusting the allocation, you can enable this tuner to
receive FM broadcasts allocated in 0.1 MHz steps.
Press and hold [TUNER/BAND]. After a few seconds, the
display will change to a flashing display of the current mini-
mum FM frequency. If you continue to hold the button down,
the minimum frequency will change.  Release the button at
this time.
To return to the original frequency indication, repeat above.
Note
¥ After changing the ÒallocationÓ setting, the frequencies you
previously preset in the memory will be cleared.
¥ Sound is momentarily interrupted if you load/unload a
cassette while listening to an AM broadcast.
A
2
3
4
1
SLEEPCLOCK CLOCK TIMER
 TIMERPLAY
REC RECAUTO OFFDISC
DISC
PLAY MODE
MUTING
MUTINGREW
REWS.SOUND EQ
S.SOUND EQDIMMER
DIMMERDISPLA
DISPLAYPRESET EQ
PRESET EQFF
123
46 5
789
PGM10
VOLVOL
CD
AUX TUNER/
BANDTAPE
0CLEAR
CLEAR2
DOWN VOLUME
UP
SLEEP SLEEPCLOCK TIMERPLAY
RECAUTO OFF
UTO OFFDISC
PLAY MODE
Y MODE
MUTINGREWS.SOUND EQ
S.SOUND EQDIMMERDISPLAYPRESET EQ
PRESET EQFF
123
46 5
789
PGM10
VOLVOL
CD
AUX TUNER/
BANDTAPE
0
CLEAR
CLEARPLAY MODE
1
4 3
TUNER  BAND
REW
FF
PLAY MODE
A
Listening operations
RQT6683(2-10)new.P653/24/05, 1:46 PM 10