Panasonic Cd Stereo System Sc-max650 Owners Manual
Here you can view all the pages of manual Panasonic Cd Stereo System Sc-max650 Owners Manual. The Panasonic manuals for Stereo System are available online for free. You can easily download all the documents as PDF.
Page 11
![Page 11
11RQT9840
FM allocation settingBy main unit only
This system can also receive FM broadcasts allocated in
0.1 MHz steps.1
Press [RADIO] to select “FM” or “AM”.
2
Press and hold [RADIO].
After a few seconds, the display panel shows the current
minimum radio frequency. Release the button when the
minimum frequency changes.
• To go back to the initial setting, do the above steps again.
• After you change the setting, preset frequencies are erased.
Clock and timersSetting the clockThis is a 12-hour...](http://img.usermanuals.tech/thumb/58/62388/w300_sc-max650_mul_om_d-10.png "Page 11
11RQT9840
FM allocation settingBy main unit only
This system can also receive FM broadcasts allocated in
0.1 MHz steps.1
Press [RADIO] to select “FM” or “AM”.
2
Press and hold [RADIO].
After a few seconds, the display panel shows the current
minimum radio frequency. Release the button when the
minimum frequency changes.
• To go back to the initial setting, do the above steps again.
• After you change the setting, preset frequencies are erased.
Clock and timersSetting the clockThis is a 12-hour...")
11RQT9840 FM allocation settingBy main unit only This system can also receive FM broadcasts allocated in 0.1 MHz steps.1 Press [RADIO] to select “FM” or “AM”. 2 Press and hold [RADIO]. After a few seconds, the display panel shows the current minimum radio frequency. Release the button when the minimum frequency changes. • To go back to the initial setting, do the above steps again. • After you change the setting, preset frequencies are erased. Clock and timersSetting the clockThis is a 12-hour...
Page 12
![Page 12
12
RQT9840Sound and illumination
effectsSound effects1
Press [SOUND] to select the sound effect.
2
Press [Y, U ] to select the desired setting.
D.BASS
Press [D.BASS] to select “ON D.BASS”,
“AUTO D.BASS” or “OFF D.BASS”.
PRESET EQ
Press [PRESET EQ] to select “HEAVY”, “SOFT”,
“CLEAR”, “VOCAL” or “FLAT”.
Using the main unit
You can adjust certain sound effect using the controls on
the main unit.
1
Press the button to select the sound effect.
[PRESET EQ]: PRESET EQ
[MANUAL EQ]: BASS, MID, TREBLE...](http://img.usermanuals.tech/thumb/58/62388/w300_sc-max650_mul_om_d-11.png "Page 12
12
RQT9840Sound and illumination
effectsSound effects1
Press [SOUND] to select the sound effect.
2
Press [Y, U ] to select the desired setting.
D.BASS
Press [D.BASS] to select “ON D.BASS”,
“AUTO D.BASS” or “OFF D.BASS”.
PRESET EQ
Press [PRESET EQ] to select “HEAVY”, “SOFT”,
“CLEAR”, “VOCAL” or “FLAT”.
Using the main unit
You can adjust certain sound effect using the controls on
the main unit.
1
Press the button to select the sound effect.
[PRESET EQ]: PRESET EQ
[MANUAL EQ]: BASS, MID, TREBLE...")
12 RQT9840Sound and illumination effectsSound effects1 Press [SOUND] to select the sound effect. 2 Press [Y, U ] to select the desired setting. D.BASS Press [D.BASS] to select “ON D.BASS”, “AUTO D.BASS” or “OFF D.BASS”. PRESET EQ Press [PRESET EQ] to select “HEAVY”, “SOFT”, “CLEAR”, “VOCAL” or “FLAT”. Using the main unit You can adjust certain sound effect using the controls on the main unit. 1 Press the button to select the sound effect. [PRESET EQ]: PRESET EQ [MANUAL EQ]: BASS, MID, TREBLE...
Page 13
13RQT9840 Exter nal equipmentBefore connection • Disconnect the AC power supply cord. • Switch off all equipment and read the appropriate operating instructions. Note: Components and cables are sold separately.Using the music portYou can play music from a portable audio equipment. Preparation Switch off the equalizer (if any) of the portable audio equipment to prevent sound distortion. Decrease the volume of the system and the portable audio equipment before you connect or disconnect the portable...
Page 14
14 RQT9840The total number of tracks displayed is incorrect. The disc cannot be read. Distorted sound is heard. • You put in a disc that the system cannot play. Change to a playable disc. • You put in a disc that has not been finalized.RadioSound is distorted. • Use an optional FM outdoor antenna. The antenna should be installed by a competent technician. A beat sound is heard. • Switch off the TV or move it away from the system. • When in AM tuner mode, select from “BP 1” to “BP 8” that provides the...
Page 15
15RQT9840 SpecificationsAmplifier sectionRMS output power stereo modeHigh 330 W per channel (3 Ω), 1 kHz, 30% THD Mid-Low 330 W per channel (3 Ω), 100 Hz, 30% THD Low 490 W per channel (2 Ω), 100 Hz, 30% THD Total RMS stereo mode power 2300 W (30% THD) FTC output power stereo mode High 130 W per channel (3 Ω), 400 Hz to 20 kHz, 1% THD Mid-Low 170 W per channel (3 Ω), 50 Hz to 200 Hz, 1% THD Low 160 W per channel (2 Ω), 50 Hz to 100 Hz, 1% THD Total FTC stereo mode power 920 WTuner, ter minals...
Page 16
16 RQT9840Cómo realizar las conexionesConecte el cable de alimentación de CA sólo después de haber hecho todas las demás conexiones.1 Conecte las bocinas. Conecte los cables de la bocina a los terminales del mismo color. 2 Conecte la antena interior FM. Coloque la antena donde la recepción sea la mejor. 3 Conecte la antena de cuadro AM. Ponga la antena en posición vertical sobre su base hasta que haga clic. 4 Conecte el cable de alimentación de CA. No use un cable de alimentación de CA de otro...
Page 17
![Page 17
17RQT9840
RadioSintonización manual1
Pulse [RADIO, EXT-IN] para seleccionar “FM” o
“AM”.
2
Pulse [3] o [5 ] para seleccionar la
frecuencia de la emisora requerida.
Presintonización de la memoriaSe pueden preconfigurar 30 emisoras de FM y 15 de AM.Preconfiguración automática1
Pulse [OK] para seleccionar la frecuencia
“LOWEST” (más baja) o “CURRENT” (actual).
2
Pulse [AUTO PRESET] para iniciar la
preconfiguración.
Para cancelar, pulse [ 8].
Preconfiguración manual1
Pulse [3] o [5 ] para sintonizar la...](http://img.usermanuals.tech/thumb/58/62388/w300_sc-max650_mul_om_d-16.png "Page 17
17RQT9840
RadioSintonización manual1
Pulse [RADIO, EXT-IN] para seleccionar “FM” o
“AM”.
2
Pulse [3] o [5 ] para seleccionar la
frecuencia de la emisora requerida.
Presintonización de la memoriaSe pueden preconfigurar 30 emisoras de FM y 15 de AM.Preconfiguración automática1
Pulse [OK] para seleccionar la frecuencia
“LOWEST” (más baja) o “CURRENT” (actual).
2
Pulse [AUTO PRESET] para iniciar la
preconfiguración.
Para cancelar, pulse [ 8].
Preconfiguración manual1
Pulse [3] o [5 ] para sintonizar la...")
17RQT9840 RadioSintonización manual1 Pulse [RADIO, EXT-IN] para seleccionar “FM” o “AM”. 2 Pulse [3] o [5 ] para seleccionar la frecuencia de la emisora requerida. Presintonización de la memoriaSe pueden preconfigurar 30 emisoras de FM y 15 de AM.Preconfiguración automática1 Pulse [OK] para seleccionar la frecuencia “LOWEST” (más baja) o “CURRENT” (actual). 2 Pulse [AUTO PRESET] para iniciar la preconfiguración. Para cancelar, pulse [ 8]. Preconfiguración manual1 Pulse [3] o [5 ] para sintonizar la...
Page 18
![Page 18
18
RQT9840Efectos de sonido y de la
iluminaciónEfectos de sonido1
Pulse [SOUND] para seleccionar el efecto de
sonido.
2
Pulse [Y, U ] para seleccionar la configuración
deseada.
Efectos DJUnidad principal solamente
Puede usar la función de efecto DJ para ajuste la calidad
del sonido.1
Pulse [DJ].
[1] a [6] se ilumina en azul.
2
Pulse [1] a [6] para seleccionar el efecto DJ
deseada.
El botón seleccionado se ilumina en rojo.
Para cancelar, pulse el botón nuevamente.
3
Gire [CONTROL] para seleccionar la...](http://img.usermanuals.tech/thumb/58/62388/w300_sc-max650_mul_om_d-17.png "Page 18
18
RQT9840Efectos de sonido y de la
iluminaciónEfectos de sonido1
Pulse [SOUND] para seleccionar el efecto de
sonido.
2
Pulse [Y, U ] para seleccionar la configuración
deseada.
Efectos DJUnidad principal solamente
Puede usar la función de efecto DJ para ajuste la calidad
del sonido.1
Pulse [DJ].
[1] a [6] se ilumina en azul.
2
Pulse [1] a [6] para seleccionar el efecto DJ
deseada.
El botón seleccionado se ilumina en rojo.
Para cancelar, pulse el botón nuevamente.
3
Gire [CONTROL] para seleccionar la...")
18 RQT9840Efectos de sonido y de la iluminaciónEfectos de sonido1 Pulse [SOUND] para seleccionar el efecto de sonido. 2 Pulse [Y, U ] para seleccionar la configuración deseada. Efectos DJUnidad principal solamente Puede usar la función de efecto DJ para ajuste la calidad del sonido.1 Pulse [DJ]. [1] a [6] se ilumina en azul. 2 Pulse [1] a [6] para seleccionar el efecto DJ deseada. El botón seleccionado se ilumina en rojo. Para cancelar, pulse el botón nuevamente. 3 Gire [CONTROL] para seleccionar la...
Page 19
19RQT9840 Limited Warranty (ONLY FOR U.S.A. AND PUERTO RICO)Online Repair RequestTo submit a new repair request and for quick repair status visit our Web Site at www.panasonic.com/repair. When shipping the unit, carefully pack, include all supplied accessories listed in the Owner's Manual, and send it prepaid,adequately insured and packed well in a carton box. Obtain Product Information and Operating Assistance; locate your nearest Dealer or Service Center; purchase Parts and Accessories; or make...
Page 20
RQT9840-P L0313CH0 Sp En Panasonic Consumer Marketing Company of North America, Divison of Panasonic Corporation of North AmericaOne Panasonic Way, Secaucus, New Jersey 07094 http://www.panasonic.com © Panasonic Corporation 2013 Printed in Malaysiamax650.book Page 20 Thursday, March 7, 2013 10:35 AM 00530055004C00510057004C0051004A