Panasonic Cd Stereo System Sc-en5, Sc-en53 Operating Instructions

RQT6734-1P
CD Stereo System
Operating Instructions
Model No.  SC-EN5
SC-EN53
Before connecting, operating or adjusting this product, please read these
instructions completely.
Please keep this manual for future reference.
PPC
AUXTUNER/BANDTUNING MODEEQLIVE VIRTUALIZERPLAY MODE
VOLUME
DISPL AY SLEEP PGM/–CLEARCD
CLOCK
 TIMER ADJTIMERON/OFF
The illustrations show SC-EN5.
01-01 SC-EN5 P [En]2/26/03, 2:02 PM 1 

RQT6734
2
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions
carefully.
These instructions are applicable to the SC-EN5 and SC-EN53 stereo
systems and the supplied RAPX0042 speakers.Supplied accessories.............................................. 3
Listening caution..................................................... 3
IMPORTANT SAFETY INSTRUCTIONS................... 4
The remote...

RQT6734
3
Please check and identify the supplied accessories. 
Use numbers indicated in parentheses when asking
for replacement parts.
(Only for U.S.A.)To order accessories contact 1-800-332-5368 orweb site (http://www.panasonic.com).
Remote control 
transmitter ....................... 1 pc.
(EUR7101010) 
AM loop antenna ............. 1 pc.
(G0ZZ00002036)AC adaptor .............. 1 pc.
(RFEA201C-T) 
Battery .................... 1 pc.
CR 2032
Supplied accessories
THE FOLLOWING APPLIES ONLY IN THE U.S.A.:...

RQT6734
4
Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions
listed below. Keep these operating instructions handy for future reference.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with
the manufacturer’s...

RQT6734
5
Batteries
The remote controlPlacement of speakers
 Notes
•Keep your speakers at least 10 mm (13/32˝) away from the system
for proper ventilation.
•These speakers do not have magnetic shielding. Do not place them
near televisions, personal computers or other devices easily
influenced by magnetism.
•To avoid damage to the speakers, do not touch the speaker cones
if you have taken the nets off.
Use
Caution
•Use the speakers only with the recommended
system. Failure to do so may lead to damage to...

Before using
RQT6734
6
(4Ω)
AM ANT
Set-up
Connect the AC adaptor only after all other connections have been made.
PreparationTwist and pull off the vinyl tip of the speaker cords.
3AC adaptor
Use only the supplied speakers.
The combination of the main unit and speakers provide the best
sound. Using other speakers can damage the unit and sound quality
will be negatively affected.Copper (+) BlackRed
Silver (–) AC adaptor
(included) Note
•The configuration of the AC adaptor differs according to the...

Before using
RQT6734
7
1Display
2AUX button (AUX)...................................................... 11
3Tuner/band select button (TUNER/BAND).............. 10
4CD stop, CD lid open/close button (L/c) ................. 8
5CD play/pause button ( CD :/ J) ................................ 8
6CD lid
7Tuning mode select button (TUNING MODE)......... 10
8Standby/on switch (POWER 
f ff f
f/I)
Press to switch the unit from on to standby mode or vice
versa. In standby mode, the unit is still consuming a small...

RQT6734
Cassette deck operations
8
One touch play
When a CD is loaded and the unit is off, press [CD :/J].
The unit comes on and starts play.
 Note
•During random play (A page 9), you cannot skip to tracks which
have already been played.
•During program play or random play (A page 9), you cannot search
forward or backward over tracks.
•During program play, skipping is always in the programmed order,
whether forward or backward.
•Program play cannot be used in combination with random play.
Direct access...

RQT6734
Recording operationsCassette deck operations
9
Repeat play and random playProgram play
This function allows you to program up to 24 tracks.
Remote control only
Preparation: Press [ CD :/J] and then [L].
1(In the stop mode)
Press [PGM/–CLEAR].
2Press [g/
∂ ∂∂ ∂
∂] or [
µ µµ µ
µ/f] to select the track you want
to play in the desired sequence.
3Press [ PGM/–CLEAR] again.
4Repeat steps 2 and 3 until you have programmed all
the tracks you want.
5Press [ CD :/J].
Play will start in the programmed...

RQT6734
Cassette deck operations
10
The radio: manual tuning
Manual pre-setting
Remote control only
Pre-set the stations one at a time.
1Press [PGM/–CLEAR] then press [g/
∂ ∂∂ ∂
∂] or [
µ µµ µ
µ/f]
to tune to the required station.
2Press [PGM/–CLEAR] then press [g/
∂ ∂∂ ∂
∂] or [
µ µµ µ
µ/f]
to select a channel.
3Press [PGM/–CLEAR].
The station occupying a channel is erased if another station is preset
in that channel.
Selecting channels
1Press [TUNING MODE] to select “PRESET”.
2Press [g/
∂ ∂∂ ∂
∂] or [...