Home
>
Panasonic
>
Stereo System
>
Panasonic Cd Stereo System Sc-ak77, Sc-ak66, Sc-ak62 Operating Instructions
Panasonic Cd Stereo System Sc-ak77, Sc-ak66, Sc-ak62 Operating Instructions
Here you can view all the pages of manual Panasonic Cd Stereo System Sc-ak77, Sc-ak66, Sc-ak62 Operating Instructions. The Panasonic manuals for Stereo System are available online for free. You can easily download all the documents as PDF.
Page 11
Before using 11 RQT5769 SC-AK77 SC-AK66 2 35 34 16 27 388 40 29 39 32 17 3637 41 43 42 4544 4847 1819 46 49 2 35 34 16 388 40 29 39 32 17 3637 41 43 42 4544 4847 1819 46 49 SC-AK62 Remote control Buttons such as 2 functions in exactly the same way as the buttons on the main unit. No. Name Ref. page 2Standby/on button (f) ............................................... 13 ^Auto off button (AUTO OFF).................................... 12 _Numeric buttons (≥10, 1–9, 0)............................15, 18...
Page 12
![Page 12
Before using
12
RQT5769
A
B
AUTO OFF
DISPLAY/
DEMO
DISPLAY/
DEMO
Turning the demo function off
If the clock has not been set, a demonstration of the display is shown
when the unit is switched to standby.
This function is set to on at the time of purchase.
Press and hold [-DISPLAY/–DEMO] until “NO DEMO” is
displayed.
The display changes each time the button is held down.
NO DEMO (off)↔DEMO (on)
Auto-off function
by remote control only
When CD or tape is selected as the source
To save power, the unit turns...](http://img.usermanuals.tech/thumb/58/62256/w300_sc-ak77_en_om_d-11.png "Page 12
Before using
12
RQT5769
A
B
AUTO OFF
DISPLAY/
DEMO
DISPLAY/
DEMO
Turning the demo function off
If the clock has not been set, a demonstration of the display is shown
when the unit is switched to standby.
This function is set to on at the time of purchase.
Press and hold [-DISPLAY/–DEMO] until “NO DEMO” is
displayed.
The display changes each time the button is held down.
NO DEMO (off)↔DEMO (on)
Auto-off function
by remote control only
When CD or tape is selected as the source
To save power, the unit turns...")
Before using 12 RQT5769 A B AUTO OFF DISPLAY/ DEMO DISPLAY/ DEMO Turning the demo function off If the clock has not been set, a demonstration of the display is shown when the unit is switched to standby. This function is set to on at the time of purchase. Press and hold [-DISPLAY/–DEMO] until “NO DEMO” is displayed. The display changes each time the button is held down. NO DEMO (off)↔DEMO (on) Auto-off function by remote control only When CD or tape is selected as the source To save power, the unit turns...
Page 13
![Page 13
Before using
13
RQT5769
1
2
3
4
SC-AK77
SC-AK66
1
2
4
3
SC-AK62
Setting the time
This is a 12-hour display clock.
This example in the figure shows how to set the time for 4:25 p.m..
Switch on the power.
Press [CLOCK/TIMER] to select “CLOCK”.
Every time you press the button:
CLOCK RECPLAY
(within 7 seconds or so)
Press [TUNE/TIME ADJ (3) or (4)] to show the
present time.
Press [CLOCK/TIMER] to finish setting the time.
The display will return to whatever was displayed before you
set the time.
To display...](http://img.usermanuals.tech/thumb/58/62256/w300_sc-ak77_en_om_d-12.png "Page 13
Before using
13
RQT5769
1
2
3
4
SC-AK77
SC-AK66
1
2
4
3
SC-AK62
Setting the time
This is a 12-hour display clock.
This example in the figure shows how to set the time for 4:25 p.m..
Switch on the power.
Press [CLOCK/TIMER] to select “CLOCK”.
Every time you press the button:
CLOCK RECPLAY
(within 7 seconds or so)
Press [TUNE/TIME ADJ (3) or (4)] to show the
present time.
Press [CLOCK/TIMER] to finish setting the time.
The display will return to whatever was displayed before you
set the time.
To display...")
Before using 13 RQT5769 1 2 3 4 SC-AK77 SC-AK66 1 2 4 3 SC-AK62 Setting the time This is a 12-hour display clock. This example in the figure shows how to set the time for 4:25 p.m.. Switch on the power. Press [CLOCK/TIMER] to select “CLOCK”. Every time you press the button: CLOCK RECPLAY (within 7 seconds or so) Press [TUNE/TIME ADJ (3) or (4)] to show the present time. Press [CLOCK/TIMER] to finish setting the time. The display will return to whatever was displayed before you set the time. To display...
Page 14
![Page 14
14
Radio operations
RQT5769
1
2
3
4
A
SC-AK77
SC-AK66
SC-AK62
MHzTUNED
ST
1
2
3
4
TUNED
STEREO
MONO
MHz
MHz
Press [TUNER, BAND] to select band.
The unit comes on automatically.
Every time you press the button:
FM ↔ AM
Press [
L LL L
L TUNE MODE] to select “MANUAL”.
Every time you press the button:
MANUAL ↔ PRESET.
Press [TUNE/TIME ADJ (3) or (4)] to select the
frequency of the required station.
“TUNED” is displayed when a radio station is tuned.
“STEREO” (“ST” for SC-AK66 and SC-AK62) is displayed when
a...](http://img.usermanuals.tech/thumb/58/62256/w300_sc-ak77_en_om_d-13.png "Page 14
14
Radio operations
RQT5769
1
2
3
4
A
SC-AK77
SC-AK66
SC-AK62
MHzTUNED
ST
1
2
3
4
TUNED
STEREO
MONO
MHz
MHz
Press [TUNER, BAND] to select band.
The unit comes on automatically.
Every time you press the button:
FM ↔ AM
Press [
L LL L
L TUNE MODE] to select “MANUAL”.
Every time you press the button:
MANUAL ↔ PRESET.
Press [TUNE/TIME ADJ (3) or (4)] to select the
frequency of the required station.
“TUNED” is displayed when a radio station is tuned.
“STEREO” (“ST” for SC-AK66 and SC-AK62) is displayed when
a...")
14 Radio operations RQT5769 1 2 3 4 A SC-AK77 SC-AK66 SC-AK62 MHzTUNED ST 1 2 3 4 TUNED STEREO MONO MHz MHz Press [TUNER, BAND] to select band. The unit comes on automatically. Every time you press the button: FM ↔ AM Press [ L LL L L TUNE MODE] to select “MANUAL”. Every time you press the button: MANUAL ↔ PRESET. Press [TUNE/TIME ADJ (3) or (4)] to select the frequency of the required station. “TUNED” is displayed when a radio station is tuned. “STEREO” (“ST” for SC-AK66 and SC-AK62) is displayed when a...
Page 15
15 Radio operations RQT5769 A B 1 2 3 1 2 3 SC-AK77 MEMO MHzSC-AK66 SC-AK62 MEMO MHz MHz Presetting radio broadcasts There are two methods of presetting stations. Automatic presetting :All the stations the tuner can receive are preset. Manual presetting :You can select the stations to preset and the order they are preset in. Up to 12 stations each can be set in the FM and AM bands. Automatic presetting Do the following once each for FM and AM. Preparation: Tune to the frequency where presetting is to...
Page 16
16 Compact disc operations RQT5769 A B C E D F XXXXXX XXX XXXXXXX XXXX XX XXXXX XXXX XX XXXXX XXXX XXXX XXXXXXXXX XX XXXXX XXXX XXXX XXXXX XXXXXX XXX XXXXXXX XXXX XX XXXXX XXXX XX XXXXX XXXX XXXX XXXXXXXXX XX XXXXX XXXX XXXX XXXXX XXX XXX XXXXX XX XXXXXXXX XXXXXXX XXXX XXXXXXX XXXX XXXXXXX XXXX XXXX XXX XXX XXXXX XX XXXXXXXX XXXXXXX XXXX XXXXXXX XXXX XXXXXXX XXXX XXXX xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxXXXX XXXX XXXXX XXXX XX XXXX XXXX XXXXX XXXX XXXX XXXXX XXXX XXXX 8 cm CD 12...
Page 17
17 RQT5769 Compact disc operations 1 2 4 3 A CD 1 CD 2 CD 3 CD 4 CD 5 DISC DISC DISC OPEN/CLOSE SC-AK77 B SC-AK66 SC-AK62 SC-AK77 SC-AK668910 756432111 12 3 4 1 123456789101112131415 SC-AK62 Track number Elapsed playing time (Of current track number) Number of tracks Total playing time Label must face upward. Disc number Listening to compact discs This unit can play CD-DA format audio CD-R and CD-RW that have been finalized ❈ upon completion of recording. It may not be able to play some CD-R or CD-RW due...
Page 18
![Page 18
18
RQT5769
Compact disc operations
1
A
B
2
3
DISC
DISC
DISC
RANDOM
1
3
2
Listening to compact discs
Direct access play
by remote control only
Press [DISC].
(within 10 seconds or so)
Press [1] – [5] to select the disc you want.
Press the numeric button to select the desired track
number.
The CD will be played from the selected track to the last track
of the final disc (A page 17).
To select a two-digit track
Press [≥10] and then the two numbers you want within 10 seconds or
so.
For example
Track no. 20:...](http://img.usermanuals.tech/thumb/58/62256/w300_sc-ak77_en_om_d-17.png "Page 18
18
RQT5769
Compact disc operations
1
A
B
2
3
DISC
DISC
DISC
RANDOM
1
3
2
Listening to compact discs
Direct access play
by remote control only
Press [DISC].
(within 10 seconds or so)
Press [1] – [5] to select the disc you want.
Press the numeric button to select the desired track
number.
The CD will be played from the selected track to the last track
of the final disc (A page 17).
To select a two-digit track
Press [≥10] and then the two numbers you want within 10 seconds or
so.
For example
Track no. 20:...")
18 RQT5769 Compact disc operations 1 A B 2 3 DISC DISC DISC RANDOM 1 3 2 Listening to compact discs Direct access play by remote control only Press [DISC]. (within 10 seconds or so) Press [1] – [5] to select the disc you want. Press the numeric button to select the desired track number. The CD will be played from the selected track to the last track of the final disc (A page 17). To select a two-digit track Press [≥10] and then the two numbers you want within 10 seconds or so. For example Track no. 20:...
Page 19
![Page 19
19
RQT5769
Compact disc operations
1
A
B
2
3
4
5
7
DISC
PRGM
DISC
DISC
DISC
DISC
DISC
DISC
1
7
4
2
3
5
Listening to compact discs
Program play
You can program up to 24 tracks.
Press [CD].
Ensure CD is stopped.
Press [PROGRAM].
Press [DISC].
(within 10 seconds or so)
Press [1] – [5] to select the disc you want.
Press the numeric button to select the desired track.
Repeat steps 3 through 5 until you have pro-
grammed all the tracks you want.
Press [
- -- -
-/4].Play will start in the programmed sequence....](http://img.usermanuals.tech/thumb/58/62256/w300_sc-ak77_en_om_d-18.png "Page 19
19
RQT5769
Compact disc operations
1
A
B
2
3
4
5
7
DISC
PRGM
DISC
DISC
DISC
DISC
DISC
DISC
1
7
4
2
3
5
Listening to compact discs
Program play
You can program up to 24 tracks.
Press [CD].
Ensure CD is stopped.
Press [PROGRAM].
Press [DISC].
(within 10 seconds or so)
Press [1] – [5] to select the disc you want.
Press the numeric button to select the desired track.
Repeat steps 3 through 5 until you have pro-
grammed all the tracks you want.
Press [
- -- -
-/4].Play will start in the programmed sequence....")
19 RQT5769 Compact disc operations 1 A B 2 3 4 5 7 DISC PRGM DISC DISC DISC DISC DISC DISC 1 7 4 2 3 5 Listening to compact discs Program play You can program up to 24 tracks. Press [CD]. Ensure CD is stopped. Press [PROGRAM]. Press [DISC]. (within 10 seconds or so) Press [1] – [5] to select the disc you want. Press the numeric button to select the desired track. Repeat steps 3 through 5 until you have pro- grammed all the tracks you want. Press [ - -- - -/4].Play will start in the programmed sequence....
Page 20
20 RQT5769 Compact disc operations 1 2 3 4 5 CD 1 CD 2 CD 3 CD 4 CD 5 SC-AK77 SC-AK66 7CD MANAGER DISC DISC DISC DISC DISC 1 2 3 4 5 SC-AK62 Specified disc number Specified track number Listening to compact discs To listen to special CDs and tracks (CD Manager function) This function makes it easier for you to select special CDs and tracks from amongst those loaded in the player. You can use this function to make recordings as well. There are 3 CD/track selection modes. •For playing back 1 track only...