Panasonic Cd Stereo System Sc-ak610, Sc-ak510, Sc-ak410 Operating Instructions

RQT6707-P
CD Stereo System
Operating Instructions
Model No.  SC-AK610
SC-AK510
SC-AK410
Before connecting, operating or adjusting this product, please read these
instructions completely.
Please keep this manual for future reference.
 SC-AK610 is available in the U.S.A. only.
As an ENERGY STAR® Partner, Panasonic has determined
that this product meets the 
ENERGY STAR® guidelines for
energy efficiency.
PPC
The illustrations show SC-AK510.
For U.S.A. 

Before using
RQT6707
2
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions
carefully.
These operating instructions are applicable to the following systems.
Unless otherwise indicated, illustrations in these operating instructions
are of SC-AK510.
SystemSC-AK610 SC-AK510 SC-AK410
Main unitSA-AK610 SA-AK510 SA-AK410
Front speakersSB-AK610 SB-AK510 SB-AK410
SubwooferSB-WAK610 – –
IMPORTANT SAFETY INSTRUCTIONS............................. 3...

Before using
RQT6707
3
Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions
listed below. Keep these operating instructions handy for future reference.
Selecting fine audio equipment such as the unit you’ve just pur-
chased is only the start of your musical enjoyment. Now it’s time to
consider how you can maximize the fun and excitement your equip-
ment offers. This manufacturer and the Electronic Industries...

Before using
RQT6707
4
Batteries
The remote control
Aim at the sensor, avoiding obstacles, at a maximum range of 7
meters directly in front of the unit.
•Keep the transmission window and the unit’s sensor free from dust.
•Operation can be affected by strong light sources, such as direct
sunlight, and the glass doors on cabinets.
Do not:
•put heavy objects on the remote control.
•take the remote control apart.
•spill liquids onto the remote control.
•Insert so the poles (+ and –) match those in the remote...

Before using
RQT6707
5
(R)
(L)
2 AM loop antenna
Stand the antenna up
on its base.
1 FM indoor antenna
Adhesive tape
Affix where
reception is best.
4 AC power supply cord
 Note
The included AC power supply cord 
is for use with this unit only.
Do not use it with other equipment.
For your reference
Information you enter into the unit’s
memory, except for time, remains 
intact for up to a week after the AC 
power supply cord is disconnected.
Set-up
Connect the AC power supply cord only after all other...

Before using
RQT6707
6
1AC supply indicator (AC IN)
This indicator lights when the unit is connected to the AC power
supply.
2Standby/on switch (
f ff f
f/I, POWER)
Press to switch the unit from on to standby mode or vice versa. In
standby mode, the unit is still consuming a small amount of power.
3Display4Remote control signal sensor............................................... 45Super sound EQ button (SUPER SOUND EQ)................... 146SC-AK610 
only
Subwoofer button...

RQT6707
Recording operationsCassette deck operations
7
The radio: manual tuning
Preparation:
Press [TUNER BAND] to select “FM” or “AM”.
Automatic presetting
Do the following once each for FM and AM.
Preparation:
 Tune to the frequency where pre-setting is to begin.
Hold down [PROGRAM] until the frequency changes.The tuner presets all the stations it can receive into the channels in
ascending order. When finished, the last station memorized is tuned in.
Manual presetting
Pre-set the stations one at a...

RQT6707
Cassette deck operations
8
1Press [c, OPEN/CLOSE] to open the tray.The unit comes on.
2Set a CD in the tray. (Label must face upward.)
To continue loading CDs in the other trays
Press [1]–[5] to select the required tray and press [c, OPEN/
CLOSE] to open the tray.
Press [c, OPEN/CLOSE] to close the tray.
3Press [1]–[5] to play your desired disc.
(Alternatively, you can press [:/J, CD] if the current disc is your
desired CD.)
The track number and its elapsed playing time are shown.
Use the CD Play...

RQT6707
Recording operationsCassette deck operations
9
To listen to specific CDs and tracks
(CD Play Mode function)
Remote control only
Preparation: Press [:/J, CD] and then [L, CLEAR].
1Press [PLAY MODE] to select the desired mode.
Every time you press the button:
ALL-DISC 1-RANDOM1-SONG
1-DISCA-RANDOM
ALL-DISC: Plays all loaded discs in succession from the
selected disc to the final disc .
1-SONG: Plays one selected track on the selected disc.
1-RANDOM: Plays one selected disc in random order....

RQT6707
Cassette deck operations
10
Total number of albums
(on the current disc)Total number of tracks
(on the current disc)File format indicator
How discs with MP3/WMA differ from CDs
CD play mode function for MP3/WMA
Remote control only
Preparation: Press [:/J, CD] and then [L, CLEAR].
1Press [PLAY MODE] to select the desired mode.
Every time you press the button:
ALL-DISC → 1-SONG → 1-ALBUM
1-DISC
 ←
ALL-DISC: Plays all loaded discs in succession from the
selected disc to the final disc 
.
1-SONG:...