Panasonic Cd Stereo System Sc-ak310, Sc-ak110 Operating Instructions

RQT6693-1P
CD Stereo System
Operating Instructions
Model No.  SC-AK310
SC-AK110
Before connecting, operating or adjusting this product, please read these
instructions completely.
Please keep this manual for future reference.
As an ENERGY STAR® Partner, Panasonic has determined
that this product meets the 
ENERGY STAR® guidelines for
energy efficiency.
PPC
The illustrations show SC-AK310.
For U.S.A. only 

Before using
RQT6693
2
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions
carefully.
These operating instructions are applicable to the following systems.
These operating instructions, however, fundamentally explain the
operation of system SC-AK310.
SystemSC-AK310 SC-AK110
Main unitSA-AK310 SA-AK110
SpeakersSB-AK310 SB-AK110
IMPORTANT SAFETY INSTRUCTIONS................... 3
Listening...

Before using
RQT6693
3
Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions
listed below. Keep these operating instructions handy for future reference.
Selecting fine audio equipment such as the unit you’ve just pur-
chased is only the start of your musical enjoyment. Now it’s time to
consider how you can maximize the fun and excitement your equip-
ment offers. This manufacturer and the Electronic Industries...

RQT6693
4
Batteries
The remote control
Aim at the sensor, avoiding obstacles, at a maximum range of 7
meters directly in front of the unit.
•Keep the transmission window and the unit’s sensor free from dust.
•Operation can be affected by strong light sources, such as direct
sunlight, and the glass doors on cabinets.
Do not:
•put heavy objects on the remote control.
•take the remote control apart.
•spill liquids onto the remote control.
•Insert so the poles (+ and –) match those in the remote control.
•Do...

Before using
RQT6693
5
1 FM indoor antenna
Adhesive tape
Affix where
reception is
best.
2 AM loop antenna
Stand the antenna up
on its base.
4 AC power supply cord
 Note
The included AC power supply
cord is for use with this unit only.
Do not use it with other equipment.
For your reference
Information you enter into the unit’s
memory, except for time, remains
intact for up to a week after the
AC power supply cord is
disconnected.
Set-up
Connect the AC power supply cord only after all other connections...

Before using
RQT6693
6
1AC supply indicator (AC IN)This indicator lights when the unit is connected to the AC power
supply.
2Standby/on switch (
f ff f
f/I, POWER)Press to switch the unit from on to standby mode or vice versa.
In standby mode, the unit is still consuming a small amount of
power.
3Display
4Remote control signal sensor................................... 4
5Super sound EQ button (SUPER SOUND EQ)........ 10
6Preset EQ select button (PRESET EQ)................... 10
7Deck 1 cassette...

RQT6693
Recording operationsCassette deck operations
7
The radio: manual tuning
Preparation:
Press [TUNER BAND] to select “FM” or “AM”.
Automatic presetting
Do the following once each for FM and AM.
Preparation:
 Tune to the frequency where pre-setting is to begin.
Hold down [PROGRAM] until the frequency changes.The tuner presets all the stations it can receive into the channels in
ascending order. When finished, the last station memorized is tuned in.
Manual presetting
Pre-set the stations one at a...

RQT6693
Cassette deck operations
8
1Press [c, OPEN/CLOSE] to open the tray.The unit comes on.
2Set a CD in the tray. (Label must face upward.)
To continue loading CDs in the other trays
Press [1]–[5] to select the required tray and press [c, OPEN/
CLOSE] to open the tray.
Press [c, OPEN/CLOSE] to close the tray.
3Press [1]–[5] to play your desired disc.(Alternatively, you can press [:/J, CD] if the current disc is your
desired CD.)
The track number and its elapsed playing time are shown.
Display during...

RQT6693
Recording operationsCassette deck operations
9
Starting play from a specific track
Remote control only
1Press [DISC] and (within 10 seconds) [1]–[5] to select the
disc.
2Select the track with the numbered buttons.To select track 10 or over, press [X10] then the two digits.
Play starts from the selected track.
Note
You cannot use this function with 1-RANDOM or A-RANDOM mode.
Program play
You can program up to 24 tracks.
Remote control only
Preparation: Press [
: :: :
:/
J JJ J
J, CD] and then [L,...

RQT6693
Cassette deck operations
10
You can use either deck 1 or deck 2 for tape playback.
Use normal position tapes.
High position and metal position tapes can be played, but the unit will
not be able to do full justice to the characteristics of these tapes.
1Press [:, TAPE].The unit comes on.
If a cassette was loaded, play starts automatically (One touch play).
2Press [c, DECK 1] or [c, DECK 2] and insert the
cassette.
Insert with the side to be played
facing towards you and the
exposed tape facing...