Panasonic Cd Stereo System Sc-ak220 Operating Instructions

RQT7528-P
CD Stereo System
Operating Instructions
Model No.  SC-AK220
Before connecting, operating or adjusting this product, please read these
instructions completely.
Please keep this manual for future reference.
As an ENERGY STAR® Partner, Panasonic has determined
that this product meets the 
ENERGY STAR® guidelines for
energy efficiency.
PPC
For U.S.A.
Table of contents
Listening caution................................................................... 2
IMPORTANT SAFETY...

Before using
RQT7528
2
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions
carefully.
These operating instructions are applicable to the following system.
SystemSC-AK220
Main unitSA-AK220
SpeakersSB-AK220
CAUTION!
DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE,
BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE.
ENSURE THE UNIT IS WELL VENTILATED.  TO PREVENT
RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO
OVERHEATING, ENSURE THAT CURTAINS AND...

Before using
RQT7528
3
Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions
listed below. Keep these operating instructions handy for future reference.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with
the...

RQT7528
4
4 AC power supply cord
 Note
The included AC power supply cord 
is for use with this unit only.
Do not use it with other equipment.
For your reference
Information you enter into the unit’s
memory, except for time, remains 
intact for up to a week after the AC 
power supply cord is disconnected.
2 AM loop antenna
Stand the antenna up
on its base.
(R)
(L)
1 FM indoor antenna
Adhesive tape
Affix where
reception is best.
(L)(R)
RL
Set-up
Connect the AC power supply cord only after all other...

Before using
RQT7528
5
1AC supply indicator [AC IN]
This indicator lights when the unit is connected to the AC power
supply.
2Standby/on switch [
f ff f
f/I, POWER]
Press to switch the unit from on to standby mode or vice versa. In
standby mode, the unit is still consuming a small amount of power.
3Display
4Deck 1 cassette holder......................................................... 11
5Disc tray
6CD tray open/close button [c, OPEN/CLOSE].................... 7
7CD direct play buttons [1 ~...

RQT7528
6
Disc information
Disc type Logo Indication used
in instructions
Audio CD
CD
CD-R/RW–CD MP3
(Depending on the
recording format A see above)
Do not:
•use irregularly shaped CDs.
•attach extra labels and stickers.
•use CDs with labels and stickers
that are coming off or with
adhesive exuding from under
labels and stickers.
•attach scratch proof covers or
any other kind of accessory.
•write anything on the CD.
•clean CDs with liquids. (Wipe
with a soft, dry cloth.)
•use CDs printed with label...

RQT7528
7
1Press [c, OPEN/CLOSE] to open the tray.The unit comes on.
2Set a CD in the tray. (Label must face upward.)
To continue loading CDs in the other trays
Press [1]–[5] to select the required tray and press [c, OPEN/
CLOSE] to open the tray.
Press [c, OPEN/CLOSE] to close the tray.
3Press [1]–[5] to play your desired disc.
(Alternatively, you can press [:/J, CD] if the current disc is your
desired CD.)
The track number and its elapsed playing time are shown.
Use the CD Play Mode function’s ALL-DISC...

RQT7528
8
CDs
To listen to specific CDs and      CD MP3
tracks (CD Play Mode function)
a ALL-DISC: Plays all loaded discs in succession from the
selected disc to the final disc .
b 1-SONG: Plays one selected track on the selected disc.
c 1-ALBUM:
MP3 
Plays one selected album on the selected disc.
d 1-RANDOM:
CD 
Plays one selected disc in random order.
e A-RANDOM:
CD Plays all loaded discs in random order.
f 1-DISC: Plays one selected disc.
Remote control only
Preparation: Press [:/J, CD] and then [L,...

RQT7528
9
To recall a marked track number in the current disc
During play or stopPress [MARKER] to recall a marker.
Play starts from the track recalled.
Note
•“NO MARKER” indicates that the marker in the current disc is empty.
•The marker memory is cleared when you open the CD tray.
•For CD-DA, you cannot use this function during 1-RANDOM and
A-RANDOM play.
•You cannot use this function during program mode.
INTRO function (Album scan)MP3
You can find an album by listening to the first track of all albums...

RQT7528
10
Remote control only
There are two methods of pre-setting stations.
Automatic presetting :All the stations the tuner can receive are preset.
Manual presetting :You can select the stations to preset and the
order they are preset in.
Up to 15 stations each can be set in the FM and AM bands.
Preparation:
Press [TUNER, BAND] to select “FM” or “AM”.
Automatic presetting
Do the following once each for FM and AM.
Preparation:
 Tune to the frequency where pre-setting is to begin.
Hold down [PROGRAM]...