Panasonic CD Player Weater Band Receiver Cq 5100u Operating Instructions

CQ-5100U21
Care of the Unit
Notes on Discs
Notes on CD-R/RW
❐Cleaning this Unit
Use a dry, soft cloth to wipe.
❐Caution on Cleaning
Never use solvents such as benzine, thinner as they
may mar the surface of the unit.
Do not play any ordinary music CDs with labels
other than this one.
• You may have trouble playing back some CD-R/RW discs recorded on CD recorders (CD-R/RW drives), either due to
their recording characteristics or dirt, fingerprints, scratches, etc. on the disc surface.
• CD-R/RW discs are...

CQ-5100U22
Speaker Connections
L
R
- 
- 
- - 
- - 
- - 
- 
- +
+
++
++
+
++ +- +
- +
- +- +- +
- +- +- +
L
R
L
R
L
R


(White)
(White
w/black stripe)
Chassis
(Gray 
w/black stripe)(Gray)
Chassis
• Use ungrounded speaker only.
• The maximum speaker input should be 37 W or more.  (If used with the optional
power amplifier, the speaker input should be higher than the maximum amplifier
output.)
• The speaker impedance should be 4 - 8 Ω.
• This unit uses the BTCL circuit, so each speaker should be connected...

CQ-5100U23
Installation Guide
❐Overview
This product should be installed by a professional.
However, should you decide to install the product
against the manufacturer’s recommendation, these
operating Instructions do not contain electrical
installation instructions. You must contact your car
dealer or manufacturer for electrical connection
instructions to avoid possible damage to your electrical
safety systems and resulting injury or death.
(Please
refer to the “WARNING” statement above).
Your next step...

CQ-5100U24
Installation Guide (Continued)
❐Preparation❐Installation Hardware
• Disconnect the cable from the negative @battery
terminal (see warning and caution below).
• Remove Mounting Collar 
qfrom the main unit
temporarily, which are already mounted at shipment.*
• Unit should be installed in a horizontal position with
the front end up at a convenient angle, but not more
than 30˚.
❐Dashboard Installation
Installation Opening
This unit can be installed in any dashboard having an
opening as shown...

CQ-5100U25
    
1
2
3
First complete the electrical connections, and then check them for correctness.(apage 27)
The included Mounting Collar qis designed specially for this unit. Do not use it to attach any other model.
Insert Mounting Collar qinto the
dashboard, and bend the mounting tabs
out with a screwdriver.
Establish the rear connection of the unit.
After fixing Power Connector, fix the rear of the unit
to the vehicle body by either method (a) or (b)
shown in the previous page.
After installation...

CQ-5100U26
To Remove the Unit from the vehicles dashboard
Insert each Removal Tool iand pull.
Note:Do not lose Removal Tools. They will be needed to remove the unit from the vehicles dashboard.
iRemoval Tool
(U-shaped)
Installation Guide (Continued)
CQ-5100U  10/8/2007  4:24 PM  

CQ-5100U27
Electrical Connections
❐Wiring Diagram
Antenna
Accessory Power(ACC)
(+12V DC, negative @ ground
 only)
Ground Lead
(Connect to a clean, bare
 metallic part of your vehicle)
Battery Lead
(Connect to vehicle battery) (Red)
ACC
Ground(Black)
(Yellow)
Battery
(Violet)
(Violet/Black)
(Gray/Black)
(Green)
(Green/Black)
(White/Black)(Gray) (white)
Left Speaker
(Front)Right Speaker
(Front)Left Speaker
(Rear)Right Speaker
(Rear)
Power Connector
The power connector does not come
along with the unit. If...

CQ-5100U28
Specifications
❐General
Power Supply: 12 V DC (11 V-16 V) test Voltage 14.4 V, Negative @ground
Current consumption: Less than 2.5 A (CD mode, 0.5 W 4-speaker)
Maximum Power Output: 37 W 
×4 channels at 400 Hz, Volume Control maximum
Tone adjustment range:
Bass: ± 12 dB at 100 Hz
Treble: ± 12 dB at 10 kHz
Power Output: 18 W per channel into 4  ohms, 40 to 30 000 Hz at 3 % THD
Suitable Speaker Impedance: 4-8 Ω
Dimensions (W H D): 178(W) 50(H) 150(D) mm {7 1-15/16 5-7/8}
Weight: 1.3 k
g{2.8...

CQ-5100U29
Memorandum
CQ-5100U  10/8/2007  4:24 PM  

CQ-5100U30
Memorandum
CQ-5100U  10/8/2007  4:24 PM