Home
>
Panasonic
>
Car Satellite Radio System
>
Panasonic Cd Player Receiver Cq C1103u Operating Instrucitons Manual
Panasonic Cd Player Receiver Cq C1103u Operating Instrucitons Manual
Here you can view all the pages of manual Panasonic Cd Player Receiver Cq C1103u Operating Instrucitons Manual. The Panasonic manuals for Car Satellite Radio System are available online for free. You can easily download all the documents as PDF.
Page 1
CD Player/Receiver Model:CQ-C1103U Operating Instructions ¡Please read these instructions (including “Limited Warranty” and “Customer Services Directory”) carefully before using this product and keep this manual for future reference. English CQ_C1103UOIeng_M-90% 10/21/2005 3:39 PM
Page 2
Before Reading These Instructions Panasonic welcomes you to our constantly growing family of electronic products owners. We endeavor to give you the advantages of precise electronic and mechanical engineering, manufactured with carefully selected components, and assembled by people who are proud of the reputation their work has built for our company. We know this product will bring you many hours of enjoyment, and after you discover the quality, value and reliability we have built into it, you too will...
Page 3
Limited Warranty U.S.A. PANASONIC CONSUMER ELECTRONICS COMPANY, DIVISION OF PANASONIC CORPORATION OF NORTH AMERICA One Panasonic Way, Secaucus, New Jersey 07094 PANASONIC SALES COMPANY, DIVISION OF PANASONIC PUERTO RICO, INC. Ave. 65 de infanteria, Km. 9.5, San Gabriel Industrial Park Carolina, Puerto Rico 00985 PANASONIC AUTO PRODUCTS LIMITED WARRANTY LIMITED WARRANTY COVERAGEIf your product does not work properly because of defects in materials and workmanship. Panasonic Consumer Electronics...
Page 4
![Page 4
Preparation
The 12-hour system is used for the clock.
1Turn the ignition switch until
the accessory indicator
lights.
2Press [SRC] (PWR: Power).
3Press [DISP] (CLOCK).
4Hold down [DISP] (CLOCK)for more than
2 seconds.
5Adjust the hour.
[[]: sets the hour ahead.
[]]: sets the hour back.
6Press [DISP] (CLOCK).
7Adjust the minute.
[[]: sets the minute ahead.[]]: sets the minute back.
8Press [DISP] (CLOCK).
Notes:¡“AdJ”is displayed before adjusting the clock.¡Hold down[]]or [[]to change numbers rapidly....](http://img.usermanuals.tech/thumb/58/65825/w300_cq-c1103u_en_om_d-3.png "Page 4
Preparation
The 12-hour system is used for the clock.
1Turn the ignition switch until
the accessory indicator
lights.
2Press [SRC] (PWR: Power).
3Press [DISP] (CLOCK).
4Hold down [DISP] (CLOCK)for more than
2 seconds.
5Adjust the hour.
[[]: sets the hour ahead.
[]]: sets the hour back.
6Press [DISP] (CLOCK).
7Adjust the minute.
[[]: sets the minute ahead.[]]: sets the minute back.
8Press [DISP] (CLOCK).
Notes:¡“AdJ”is displayed before adjusting the clock.¡Hold down[]]or [[]to change numbers rapidly....")
Preparation The 12-hour system is used for the clock. 1Turn the ignition switch until the accessory indicator lights. 2Press [SRC] (PWR: Power). 3Press [DISP] (CLOCK). 4Hold down [DISP] (CLOCK)for more than 2 seconds. 5Adjust the hour. [[]: sets the hour ahead. []]: sets the hour back. 6Press [DISP] (CLOCK). 7Adjust the minute. [[]: sets the minute ahead.[]]: sets the minute back. 8Press [DISP] (CLOCK). Notes:¡“AdJ”is displayed before adjusting the clock.¡Hold down[]]or [[]to change numbers rapidly....
Page 5
![Page 5
Maintenance
Your product is designed and manufactured to ensure the minimum of maintenance. Use a soft cloth for routine
exterior cleaning. Never use benzine, thinner, or other solvents.
Cleaning the
Unit Fuse
Anti-Theft System
This unit is equipped with a removable face plate. Removing this face plate makes the unit totally inoperable.
Removing
1Turn off the power.
2Press []. The face plate will open.
3Pull it out toward you.
Mounting
1Slide the left side of the face plate in place.
2Press the right end...](http://img.usermanuals.tech/thumb/58/65825/w300_cq-c1103u_en_om_d-4.png "Page 5
Maintenance
Your product is designed and manufactured to ensure the minimum of maintenance. Use a soft cloth for routine
exterior cleaning. Never use benzine, thinner, or other solvents.
Cleaning the
Unit Fuse
Anti-Theft System
This unit is equipped with a removable face plate. Removing this face plate makes the unit totally inoperable.
Removing
1Turn off the power.
2Press []. The face plate will open.
3Pull it out toward you.
Mounting
1Slide the left side of the face plate in place.
2Press the right end...")
Maintenance Your product is designed and manufactured to ensure the minimum of maintenance. Use a soft cloth for routine exterior cleaning. Never use benzine, thinner, or other solvents. Cleaning the Unit Fuse Anti-Theft System This unit is equipped with a removable face plate. Removing this face plate makes the unit totally inoperable. Removing 1Turn off the power. 2Press []. The face plate will open. 3Pull it out toward you. Mounting 1Slide the left side of the face plate in place. 2Press the right end...
Page 6
Safety Information Warning Observe the following warnings when using this unit. ❑The driver should neither watch the display nor operate the system while driving. Watching the display or operating the system will distract the driv- er from looking ahead of the vehicle and can cause accidents. Always stop the vehicle in a safe location and use the parking brake before watching the display or operating the system. ❑Use the proper power supply.This product is designed for operation with a negative grounded...
Page 7
Caution Observe the following cautions when using this unit. ❑Keep the sound volume at an appropriate level.Keep the volume level low enough to be aware of road and traffic conditions while driving. ❑This unit is designed for use exclusively in automo- biles. ❑Do not operate the unit for a prolonged period with the engine turned off. Operating the audio system for a long period of time with the engine turned off will drain the battery. ❑Do not expose the unit to direct sunlight or excessive heat....
Page 8
![Page 8
General
General Operations
Power On/Off
Turn your cars ignition switch to the ACC or ON position.
Power on: Press [SRC] (PWR: Power).
Power off: Hold down [SRC] (PWR: Power)for
more than 1 second.
Source Selection
Press[SRC](Source) to change the source.
Volume Adjustment
(Setting Range: 0 to 40, Default: 18)
Turn [VOL](Volume).
Mute
ON: Press [MUTE]. (lights.)
OFF: Press [MUTE]again.
SQ (Sound Quality)
SQ is a function that can call up various sound types at
the touch of button in accordance with your...](http://img.usermanuals.tech/thumb/58/65825/w300_cq-c1103u_en_om_d-7.png "Page 8
General
General Operations
Power On/Off
Turn your cars ignition switch to the ACC or ON position.
Power on: Press [SRC] (PWR: Power).
Power off: Hold down [SRC] (PWR: Power)for
more than 1 second.
Source Selection
Press[SRC](Source) to change the source.
Volume Adjustment
(Setting Range: 0 to 40, Default: 18)
Turn [VOL](Volume).
Mute
ON: Press [MUTE]. (lights.)
OFF: Press [MUTE]again.
SQ (Sound Quality)
SQ is a function that can call up various sound types at
the touch of button in accordance with your...")
General General Operations Power On/Off Turn your cars ignition switch to the ACC or ON position. Power on: Press [SRC] (PWR: Power). Power off: Hold down [SRC] (PWR: Power)for more than 1 second. Source Selection Press[SRC](Source) to change the source. Volume Adjustment (Setting Range: 0 to 40, Default: 18) Turn [VOL](Volume). Mute ON: Press [MUTE]. (lights.) OFF: Press [MUTE]again. SQ (Sound Quality) SQ is a function that can call up various sound types at the touch of button in accordance with your...
Page 9
.
Note:If no operation takes place for more than 5 seconds
in the audio menu (2 seconds in Main volume adjustment),
the display returns to the regular mode.
2Select a mode to be adjusted.
Press
[VOL](PUSH SEL: Select).
3Adjust.
Turn
[VOL].
(Setting Range: 0 to 40, Default: 18):Up:Down
(Setting Range: –12 dB to +12 dB by 2 dB,
Default: 0 dB):Increased:Decreased
(Setting Range: –12 dB to +12 dB by 2 dB,
Default: 0...](http://img.usermanuals.tech/thumb/58/65825/w300_cq-c1103u_en_om_d-8.png "Page 9
Audio Setting
Audio menu
1Display the audio menu.
Press[VOL](PUSH SEL: Select).
Note:If no operation takes place for more than 5 seconds
in the audio menu (2 seconds in Main volume adjustment),
the display returns to the regular mode.
2Select a mode to be adjusted.
Press
[VOL](PUSH SEL: Select).
3Adjust.
Turn
[VOL].
(Setting Range: 0 to 40, Default: 18):Up:Down
(Setting Range: –12 dB to +12 dB by 2 dB,
Default: 0 dB):Increased:Decreased
(Setting Range: –12 dB to +12 dB by 2 dB,
Default: 0...")
Audio Setting Audio menu 1Display the audio menu. Press[VOL](PUSH SEL: Select). Note:If no operation takes place for more than 5 seconds in the audio menu (2 seconds in Main volume adjustment), the display returns to the regular mode. 2Select a mode to be adjusted. Press [VOL](PUSH SEL: Select). 3Adjust. Turn [VOL]. (Setting Range: 0 to 40, Default: 18):Up:Down (Setting Range: –12 dB to +12 dB by 2 dB, Default: 0 dB):Increased:Decreased (Setting Range: –12 dB to +12 dB by 2 dB, Default: 0...
Page 10
 to select the radio
source.
2Press [BAND]to select a band.
3Select a station.
Frequency adjustment
[TUNE]]: Lower
[TUNE[]: Higher
Note:Hold down either of them for more than 0.5
seconds and release it for station search.
Preset station selection
Press the corresponding preset button from [1]to [6]to
tune into a preset station.
[TUNE ]] [TUNE []down/up the frequency. (Hold down it for
more than 0.5 seconds for seek tuning.)
[BAND]
selects a band in the...](http://img.usermanuals.tech/thumb/58/65825/w300_cq-c1103u_en_om_d-9.png "Page 10
Radio (AM/FM )
Operation Flow
1Press [SRC](Source) to select the radio
source.
2Press [BAND]to select a band.
3Select a station.
Frequency adjustment
[TUNE]]: Lower
[TUNE[]: Higher
Note:Hold down either of them for more than 0.5
seconds and release it for station search.
Preset station selection
Press the corresponding preset button from [1]to [6]to
tune into a preset station.
[TUNE ]] [TUNE []down/up the frequency. (Hold down it for
more than 0.5 seconds for seek tuning.)
[BAND]
selects a band in the...")
Radio (AM/FM ) Operation Flow 1Press [SRC](Source) to select the radio source. 2Press [BAND]to select a band. 3Select a station. Frequency adjustment [TUNE]]: Lower [TUNE[]: Higher Note:Hold down either of them for more than 0.5 seconds and release it for station search. Preset station selection Press the corresponding preset button from [1]to [6]to tune into a preset station. [TUNE ]] [TUNE []down/up the frequency. (Hold down it for more than 0.5 seconds for seek tuning.) [BAND] selects a band in the...