Panasonic Cassette Weather Band Receiver Cq 4500u Operating Instructions

11
TPS Operation (Tape Program
Search)
Press [3 TPS]to activate the tape program search mode.
To select a desired program, press [i i] or[j j]corresponding
times to go backward (up to 8) or forward (up to 9).
(Rewind:) (Fast forward:)
8019
cc
Ex1. To select the current program
again, press 
[3 TPS], and
press [i i].
Ex2. To  select the previous
program, press 
[3 TPS], and
press [i i]twice.
Ex3. To select the next program,
press 
[3 TPS]and press [j j].
Ex4. To  select the 3rd next
program , press 
[3...

12
Cassette Tape Player Basics  (continued)
Repeat Play
Press [4 REP]to repeat the current program.
Press [4 REP]again to cancel.
Blank Skip
Press [5 SKP]to skip unrecorded portions on the tape.
Press [5 SKP]again to cancel.
Notes:
When repeat is on, the blank skip does not work because the
repeat has priority over the blank skip.
The blank skip does not work when the unrecorded portion of the
tape is less than 15 seconds.
REPEAT
B•SKIP 

13
CD Changer Basics
To Start the CD Changer
Once the CD changer has been connected, press [MODE]to
change to the CD changer mode. When a disc magazine is
inserted, CD play starts automatically.
Selecting a Disc
Press [1](iDISC) or [2] (DISC j) to select a disc in descending
or ascending order.
Then, the selected disc will start to play from the first track.
Note:The number of discs you can load the CD changer with is
specific to each model.
Selecting a Track
Press [j j]to advance to the next track....

0000
E 3E 1
E 2
14
Repeat a Track
Press [5] (RPT: REPEAT) to repeat the current selection.
REPEAT indicator lights.
Press [5] (RPT: REPEAT) again to cancel.
Random Selection
Press [6](RDM: RANDOM). All the available tracks on all discs in
the magazine will be played in a random sequence.
Press [6](RDM: RANDOM) again to cancel.
Note:The Random mode will stop and the disc select function will
operate once the [1] (
iDISC) or [2] (DISC j) is pressed.
Scanning Track
Press [4](CD SCAN). The display blinks and...

15
Clock Basics (The clock system is 12-hours.)
Initial Time
Press and hold [CLK]to set time display. AM 12:00 blinks, and
the time setting mode is activated.
Press 
[i i]to set the hour.
Press 
[j j]to set the minute.
(Hold 
[i i]or [j j]to change numbers rapidly.)
Once the time has been set, release [CLK].
Note:When the clock is not set yet, SET is displayed.
Resetting the Time
When you want to reset the time, repeat step and above.
Selecting the Clock Display
Press [CLK]to display the current...

16
Alarm Time Setting
Press and hold [ALM]to set alarm time Display blinks, and the
alarm time setting mode is activated.
Press 
[i i]to set the hour.
Press 
[j j]to set the minutes.
(Hold 
[i i]or [j j]to change numbers rapidly.)
When you have set the alarm time, release [ALM].
Note:When the alarm is not set yet, AM 12:00 is displayed.
Resetting the Alarm Time
When you want to reset the alarm time, repeat steps and 
above.
Alarm Operation
Alarm is switched to ON or OFF each time [ALM]is pressed....

BASS/FAD
BAL/FADER
17
Temperature Reading (Only for CQ-4500U)
To read the temperatare outside the vehicle, press and hold the
knob 
[SEL]for more than 2 seconds. The current temperature in
Fahrenheit is displayed on the display.
Press and release the knob [SEL]to shift the temperature display
to the current operating mode.
Press and hold the knob [SEL]for more then 2 seconds again to
cancel the temperature reading mode.
The display will show TAPE CLN to warn you to clean the
cassette head for maintaining...

18
BASS/FAD
BAL/FADER
l
k
In Case of Malfunction
Reset Switch
If the unit does not respond when the function buttons are
pressed, press the reset switch with a small pointed object,
such as a pencil point. This will restore the unit to its default
settings. All previously stored memory settings will be
erased. Repeat the necessary steps in the previous pages to
reprogram the clock and memory settings. If pressing the
reset switch does not restore normal operation, please
return the radio to the nearest...

19
Installation Guide
This installation information is designed for experienced installers
and is not intended for non-technical individuals. It does not
contain warnings or cautions of potential dangers in attempting to
install this product.
Any attempt to install this product in a motor vehicle by anyone
other than qualified installer could cause damage to the electrical
system and could result in serious personal injury or death.
WARNING
❏Overview
This equipment should be installed by a
professional....

20
❏Required Tools
Youll need a screwdriver, a 1.5 volt AA battery
and the following:
12 V DC ELECTRICAL SIDE-CUT
TEST BULB TAPE PLIERS
❏Dashboard Specifications
❏Identify All Leads
The first step in installation is to identify all the
vehicle wires youll use when hooking up your
sound system.
As you identify each wire, we suggest that you
label it using masking tape and a permanent
marker. This will help avoid confusion when
making connections later.
Note:Do not connect the power connector to the
stereo...