Panasonic Camera Recorder Ajhdc27hp Operating Instructions

31
Adjusting the white shading(continued)
Select the file No.
Give a title to the selected file.
5Turn the JOG dial button to move the arrow
(cursor) to the “TITLE : ” item.
< LENS FILE >
FILE SELECT      :1
READ
WRITE
RESET ALL
nTITLE:
1:5:
2:6:
3:7:
4:8:
6When the JOG dial button is pressed, the arrow
(cursor) moves to the title input area, and the input
mode is established.
< LENS FILE >
FILE SELECT      :1
READ
WRITE
RESET ALL
m
TITLE:
1:5:
2:6:
3:7:
4:8:
10When the title has been input, turn the JOG...

32
11When the JOG dial button is pressed, the arrow
(cursor) returns to the TITLE: item.
< LENS FILE >
FILE SELECT      :1
READ
WRITE
RESET ALL
nTITLE:
222222222222
1:5:
2:6:
3:7:
4:8:
Adjusting the white shading(continued)
< CAM CARD READ/WRITE >
READ
SELECT      :1
WRITE
SELECT      :1
CARD CONFIG
READ USER DATA
TITLE        :
WR
ITE ?
YES
nNO
< LENS FILE >
FILE SELECT      :1
READ
nWRITE
RESET ALL
TITLE:
222222222222
1:5:
2:6:
3:7:
4:8:
12Turn the JOG dial button to move the arrow
(cursor) to the...

33
7Turn the JOG dial button to move the arrow
(cursor) to YES, and press the JOG dial button.
The recorded data from the white shading file is
read.
8Press the MENU button twice.
The setting menu is cleared, and the displays
showing the unit’s current statuses appear at the
top and bottom of the viewfinder screen.
6When the JOG dial button is pressed, the following
message appears.
< CAM CARD READ/WRITE >
READ
SELECT      :1
WRITE
SELECT      :1
CARD CONFIG
READ USER DATA
TITLE        :
RE
AD ?
YES
nNO...

34
Adjusting the viewfinder (The viewfinder is an optional accessory.)
Attaching the viewfinder and
adjusting its position
The viewfinder’s position can be adjusted in the front-
back and left-right directions so that what appears on
its screen inside can be seen most easily.
Attaching the viewfinder and adjusting its
position
1Connect the viewfinder’s plug to the viewfinder
connector.
2Loosen the viewfinder left-right position anchoring
ring.
3While pulling up the viewfinder stopper, attach the...

35
Audio input preparation
1Open the mic holder.
2Attach the microphone, and tighten the locking
screw.
3Connect the microphone’s connecting cable to the
MIC IN jack on the camera.
When attaching a microphone to
the viewfinder (optional accessory)
for use
The microphone of the AJ-MC700P mic kit (optional
accessory) can be attached to the viewfinder.
AJ-HVF27BP
MIC IN jack
Mic holder
Locking
screw
4Set the AUDIO IN switch or switches to “FRONT”
in accordance with the audio channel or channels
whose sound...

36
Audio input preparation(continued)
1Remove the screws used to attach the mic holder.5Connect the microphone’s connecting cable to the
MIC IN jack on the camera.
6Set the AUDIO IN switch or switches to “FRONT”
in accordance with the audio channel or channels
whose sound is to be recorded. Attaching the AJ-MH800G mic holder (optional
accessory)
When attaching a microphone to
the main unit for use
MIC IN jack
AUDIO IN switches
2Attach the microphone holder (AJ-MH800G) to the
camera recorder using the the...

37
Audio input preparation(continued)
1Connect the microphone’s connecting cable to the
MIC IN jack on the camera.
2Set the AUDIO IN switch or switches to “FRONT”
in accordance with the audio channel or channels
whose sound is to be recorded.

When extending the microphone’s connecting cable,
use a cable which supports the phantom power supply
system.

When the LINE/MIC/+48V selector switch is set to
“+48V,” the phantom power supply system is
supported.
When connecting a microphone to
the MIC IN jack...

38
Audio input preparation(continued)
3Set the LINE/MIC/+48V selector switch on the rear
panel to “LINE.”
1Connect the AUDIO IN connectors on the camera
with the audio component using the XLR cable.
2Set the AUDIO IN switch or switches for the
channel or channels to which the audio component
has been connected to “REAR.”
When connecting audio components
AUDIO IN
connectors
AUDIO IN switchesLINE/MIC/+48V
selector switch




39
Mounting the unit on a tripod
1Attach the tripod adapter to the tripod.

Select the adapter holes that best support the
center of gravity of the unit and tripod adapter.
Check that the diameters of the selected holes
match the diameters of the pan head.
2Attach the camera to the tripod adapter.
Slide the camera toward the front along the
grooves until it clicks into place. Use the tripod adapter available as an optional
accessory for mounting the unit onto a tripod.
Pan head Tripod adapter
Red...

40
Attaching the shoulder strap
1Attach the shoulder strap to the shoulder strap
mounting hooks, and adjust the length of the strap.

Check that the shoulder strap is securely fastened.
Shoulder strap
The clip opens
when it is
pressed here.The clip opens when it
is pressed here.
To detach the shoulder strap, open the clips on the
mounting parts and detach.
Adjusting the shoulder pad position
1Loosen the two screws.
2Slide the shoulder pad either backward or forward,
and find the optimum position....