Panasonic Camera Recorder Ajhdc27hp Operating Instructions

131
Connectors and signals (continued)
Matsushita part number K1AB112J0006
Maker part number HR10A-10R-125C
(Hirose Denki)
12
4
5
63
7 8 91011
12
EVF
1 UNREG+12V
2 UNREG+12V
3 A+9.0V
4 AGND
5 AGND
6 VF-Y
7 VF-Y GND
8 VF-CLK
9 VF-WR
10 VF-DATA
11 UNREG GND
12 ZEBRA-SW
13 PEAKING
14 A+9.0V
15 VF-PR
16 VF-PB
17 SW3
18 FRONT-VR
19 VF-GND
20 UNREG-GND
Matsushita part number K1AB120H0001
Maker part number HR12-14RA-20SC
12
3
45
6
789
10
11
12
1314 15
16
17
1819 20

The maximum output current of the
power...

132
Inspections prior to shooting
Perform the following inspections prior to shooting to
check that the systems are operating properly.
It is recommended that the images be checked using
a color monitor.
Preparation for inspection
1Insert a fully charged battery.Set the camera unit’s switches as shown in the figure
below.
Inspecting the camera unit
Aperture:Automatic
Zoom:AutomaticWHITE BAL:
A or B OUTPUT/AUTO
KNEE:BARS VTR SAVE/STBY:STBY
2Set the POWER switch to ON, and check that the
HUMID display has...

133
Inspections prior to shooting (continued)
Inspecting the viewfinder
1Adjust the position of the viewfinder.
2Check that the color bar signals are displayed on
the viewfinder screen, and adjust the BRIGHT,
CONTRAST and PEAKING controls in such a way
that the color bar signals appear clearly on the
viewfinder.
3Check that the MENU screen is shown on the
viewfinder screen and that the item settings can be
changed by operating the MENU button or JOG
dial button.
(Refer to pages 86 to 88 for the menu...

134
Inspections prior to shooting (continued)
Inspecting the aperture and
zoom functionsInspecting the VTR unit
1Set the zoom to the motorized zoom mode, and
check its operations in this mode.
Check that the image changes when the zoom is
set to the telephoto and wide-angle positions.
1. Tape travel inspection
1Set the VTR SAVE/STBY switch to SAVE, and
check that the VTR SAVE lamp inside the
viewfinder lights.
2Set the VTR SAVE/STBY switch to STBY, and
check that the VTR SAVE lamp goes off.
3Set the TCG...

135
6. Inspections relating to the time code
and user bits
1Set the user bits as required.
For details on the setting procedure, refer to
“Setting the user bits” (page 65).
2Set the time code.
For details on the setting procedure, refer to
“Setting the time code” (page 66).
3Set the TCG switch to R-RUN.
4Press the VTR START button.
Check that the figure on the counter display
changes as the tape travels.
5Press the VTR START button again.
Check that the tape stops and the figure shown on
the counter...

136
Specifications
[GENERAL]
Supply voltage:
DC 12 V (DC 11 V—DC 17 V)
Power consumption:
36 W
Ambient operating temperature:
0°C to +40°C (+32°F to +104°F)
Storage temperature:
–20°C to +60°C (–4°F to +140°F)
Ambient operating humidity:
Less than 85% (relative humidity)
Continuous operating time:
Approx. 150 minutes
(when using the Anton/Bauer DIONIC90)
Weight:
4.7 kg (10.34 lb) (main unit only)
Approx. 7.4 kg (16.28 lb) 
(including main unit, viewfinder, lens, battery pack,
tape and microphone)...

137
Specifications(continued)
[VTR UNIT] [Connector Section]
VTR Tape Transport System
Tape used:
1/4-inch DVCPRO L-size cassette tape
Tape speed:
135.28 mm/s (59.94 Hz)
135.4154 mm/s (60.00 Hz)
Recording/playback time:
32 minutes (using AJ-HP32LP)
FF/REW time:
Approx. 2.5 minutes (using AJ-HP32LP)
VTR Video System
Sampling frequency:
Y : 74.1758 MHz (59.94 Hz)
74.25 MHz (60.00 Hz)
P
B/PR: 37.0879 MHz (59.94 Hz)
37.125 MHz (60.00 Hz)
Quantizing:
8 bits
Video compression system:
DCT + variable-length...

138
Specifications(continued)
[VIEWFINDER]
(Optional accessory: AJ-HVF27BP)
CRT:
2.0-inch high-resolution monochrome tube
Video system:
720 lines, 60 fields
External adjustment controls:
Controls:
BRIGHT, CONTRAST, PEAKING
Switches:
TALLY HIGH/OFF/LOW, ZEBRA ON/OFF
[ACCESSORIES]
Shoulder strap (a1)
Battery mount connector (a1)
[RELATED COMPONENTS & PARTS]
Relating to power supply
Battery case:
AU-M402H
AC adapter:
AJ-B75P
Viewfinder
2.0-inch viewfinder:
AJ-HVF27BP
Relating to external VTRs
Extension...

MEMO

 
 

PANASONIC BROADCAST & TELEVISION SYSTEMS COMPANY
UNIT COMPANY OF PANASONIC CORPORATION OF NORTH AMERICA
Executive Office:
One Panasonic Way 4E-7, Secaucus, NJ 07094   (201) 348-7000
EASTERN ZONE: 
One Panasonic Way 4E-7, Secaucus, NJ 07094   (201) 348-7621
Southeast Region:
1225 Northbrook Parkway, Ste 1-160, Suwanee, GA 30024   (770) 338-6835
Central Region:
1707 N Randall Road E1-C-1, Elgin, IL 60123   (847) 468-5200
WESTERN ZONE: 
3330 Cahuenga Blvd W., Los Angeles, CA 90068   (323) 436-3500...