Panasonic Camera Lumix Dmc Zs30 Owners Manual

Wi-Fi
Remote ShootingVQT4T08
- 201 -
Sending location information to the camera from a smartphone/tablet
You can acquire location information from a smartphone/tablet, and write it on images 
afterwards.
Refer to  (→144) for how to write the location information on the images recorded by this unit.
Select [  ] on a smartphone/tablet
 • The screen differs depending on the operating system.    

Wi-Fi
Easily connect to a smartphone  (NFC)VQT4T08
- 202 -
Use the NFC (Near Field Communication) function to easily connect this unit to a 
smartphone with Wi-Fi, to record remotely, and send pictures to a smartphone.
 • This function can be used with NFC compatible devices with Android (2.3.3 or above). (Not available in certain models)
 ■Preparations on the camera
 • In [Wi-Fi Setup], set [NFC Operation] to [ON]  (→251)
 ■Preparation on the smartphone side
 • Install “Image App” in advance (→197) •...

Wi-Fi
Easily connect to a smartphone  (NFC)VQT4T08
- 203 -
Connecting easily to a smartphone for remote control
If you use the NFC function, the operation for “Connecting to smartphone/tablet” becomes 
quicker (→198)
Start “Image App” on the smartphone
Place your smartphone to the side of this unit
Place the NFC area of your smartphone over the part of this unit as shown in the 
figure below.
 • This function can be used even when the camera is turned off. • Do not bump your smartphone strongly against...

Wi-Fi
Easily connect to a smartphone  (NFC)VQT4T08
- 204 -
Transferring a still picture easily to your smartphone
You can use the NFC function to easily transfer a still picture displayed on this unit to a 
smartphone with “Image App” installed.
Start “Image App” on the smartphone
Display the still picture to be transferred to your smartphone 
on the 1-picture screen (full screen)
Place your smartphone to the side of this unit (→203)
The still picture displayed on this unit is transferred to your...

Wi-Fi
Connecting via a wireless access point
VQT4T08- 205 -
This section describes how to use the Wi-Fi connection to connect to compatible devices 
and other equipment via a wireless access point.
CameraWireless access point Compatible devices, etc.,  
on network
Use cursor button to select [Via Network] in the connection 
method settings screen, and then press [MENU/SET]
Use cursor button to select connection method, and then 
press [MENU/SET]
Connection method Description
[WPS (Push-Button)]
*Save...

Wi-Fi
Connecting via a wireless access pointVQT4T08
- 206 -
When connecting with [WPS (PIN code)]
Use cursor button to select the wireless access point you are 
connecting to, and press [MENU/SET]
Enter the PIN code displayed on the camera screen into the 
wireless access point
Press [MENU/SET]
 • Refer to the wireless access point instruction manual for details.
If you are not sure about the WPS compatibility  
(connecting by [Manual Connection])
Search for available wireless access points.
 • Confirm...

Wi-Fi
Connecting via a wireless access pointVQT4T08
- 207 -
 ■When connecting with [Manual Input]
If the wireless access point does not appear, you can directly enter the SSID.
In step  (→206), use cursor button to select [Manual Input], and 
then press [MENU/SET]
Enter the SSID of the wireless access point you are 
connecting to, then select [Set]
 • For details on how to enter characters, refer to “Entering Text”  (→114).
Use cursor button to select the network authentication type, 
and press...

Wi-Fi
Connecting directly
VQT4T08- 208 -
Directly connect this unit to the device you are using as a wireless access point. You can 
connect this unit and your device in a method supported by your device.
Camera Wi-Fi compatible 
devices
Use cursor button to select [Direct] in the connection method 
settings screen, and then press [MENU/SET]
Use cursor button to select connection method, and then 
press [MENU/SET]
Connection method Description
[Wi-Fi Direct]™
  Set the device to Wi-Fi Direct mode  Use...

Wi-Fi
Playback on TV
VQT4T08- 209 -
You can use the Wi-Fi function [Playback on TV] to display pictures on a television that is 
compatible with a DLNA certified digital media renderer (DMR).
Displaying the picture on TV right after taking it/ 
Displaying the picture on TV by playing it back on the camera
 • For details about compatible devices, refer to the website below. http://panasonic.jp/support/global/cs/dsc/ (This site is available in English only .)
Preparations: Set the TV to DLNA

 waiting...

Wi-Fi
Playback on TVVQT4T08
- 210 -
Take or play back pictures on this unit
 • To change the setting or disconnect, press [Wi-Fi] button.  (→196)
 ●Motion pictures cannot be displayed on a TV. ●During the multi/calendar playback, pictures displayed on the screen of this unit are 
not displayed on TV.
 ●When a TV is connected to this unit, the TV screen may temporarily return to the 
status before the connection. Pictures are displayed again when you take or play back 
pictures.
 ●[Effect] and [Sound] of...