Panasonic Camera HX A1 Owners Manual

11(ENG) SQT0885
∫About recording formats and compatibility of this unit
≥This unit is an MP4 format (MPEG-4 AVC file standard) Wearable  Camera for recording high-
definition motion pictures.
≥ AVCHD and MPEG2 motion pictures are different formats, and are  not therefore supported by 
this unit.
∫ About the portrait rights
Be sure to pay special attention to the privacy, the portrait rights, etc. of the subject when you use 
this unit. Use it at your own risk.
∫About the “Image App”Install the smartphone...

12SQT0885 (ENG)
Check the accessories before using this unit.
Keep the accessories out of reach of children to prevent swallowing.
Product numbers correct as of March 2015. These may be subject  to change.
*1 This is attached to this unit at the time of purchase.
*2 This unit is not waterproof when the terminal cover (USB conn ection) is in use. When using this 
unit in wet locations or underw ater, use the terminal cover (wa terproof).
*3 For information on how to use t he Multi Mount and Tripod Mount,...

13(ENG) SQT0885
Charging the battery
≥This unit has a built-in rechargeable lithium-ion battery. Do n ot remove except when 
disposing of this unit. ( l30)
≥ It is recommended to charge the battery in a temperature betwee n 10oC and 30 oC (50  oF 
and 86  oF).
≥ When this unit is turned on, i t takes longer than usual to char ge the battery.
A USB cable (supplied)
B Turn the side with the symbol up to connect the micro B end of  the USB cable to the USB 
terminal of this unit.
1Rotate the terminal cover...

14SQT0885 (ENG)
Charging and recording time
∫Charging/Recording time≥Temperature: 25 oC (77  oF)/humidity: 60%RH
≥ “h” is an abbreviation for hour, “min” for minute and “s” for s econd.
≥ These times are approximations.
≥ The indicated charging time is for when the battery has been di scharged completely. 
Charging time and recordable time vary depending on the usage c onditions such as high/
low temperature.
≥ The actual recordable time refers to the recordable time when r epeatedly starting/stopping...

15(ENG) SQT0885
This unit can record motion pictures or still pictures to a microSD card.
Cards that you can use with this unit
≥To record motion pictures, use a microSD card conformi ng to an  SD Speed Class Rating of 
Class 4 or higher.
If you use a microSD card with an SD Speed Class Rating that do es not support the 
current recording setting, recording may stop suddenly.
≥ Operation is not guaranteed for all microSD cards.
≥Keep the Memory Card out of reach of children to prevent swallo wing....

16SQT0885 (ENG)
2Insert (remove) the microSD card into (from) the card slot.≥Insert the microSD card with its  terminal side facing down. Push it straight in until it clicks into 
place as shown in the figure.
≥ Press the center of the microSD card and then pull it straight  out.
3Rotate the terminal cover in the opposite direction of Step 1 t o attach it.≥Tighten it firmly to ensure that it is not loose.
Press the power button to turn on this unit.
About overheat detection
If the internal temperature of...

17(ENG) SQT0885
∫Use this unit as a wireless LAN device
When using equipment or computer systems that require more reli able security than wireless LAN 
devices, ensure that the appropriate measures are taken for saf ety designs and defects for the 
systems used. Panasonic will not take any responsibility for an y damage that arises when using this 
unit for any purpose other than as a wireless LAN device.
∫ Use of the Wi-Fi function of this unit is presumed to be in cou ntries 
where this unit is sold...

18SQT0885 (ENG)
Install the “Image App”
The “Image App” allows you to change this unit’s settings and record and play back images.
* The supported OS versions are current as of March 2015 and sub ject to change.
≥ Use the latest version.
≥ Refer to [Help] in the “Image App” menu about how to operate.
≥ The service may not be able to be used properly depending on th e type of smartphone being 
used. For information on the “Image App”, check the support web site below....

19(ENG) SQT0885
∫Preparations before connection
1 Install the smartphone application “Image App” on your smartph one. (l18)
2 Turn on the Wi-Fi function of your smartphone.
≥ For further details, please read the operating instructions for the smartphone.
Setting up a Wi-Fi connection to a smartphone
≥Check that the Wi-Fi lamp is off.
1Press and hold the recording mode/Wi-Fi button for at least 
1 second (approx.), and remove your finger.
≥The Wi-Fi lamp will flash red.
2Tap the SSID of this unit (below)...

20SQT0885 (ENG)
Setting date and time
The date and time setting of this unit is synchronized with that of the smartphone.
synchronize to adjust the clock, etc.
1Ta p     # [Camera setup].
2Tap [Date & time].
≥When you want to adjust the clock, change the time of the smart phone first, and then synchronize 
the time with this unit.
≥ It may take approximately 60 seconds to synchronize the time of  the smartphone with that of this 
unit.
≥ When the built-in battery of this unit runs down, the date and time...