Panasonic Build Up Unit Ak Hbu931p Operating Instructions

Model AK-HBU931P
Before attempting to connect, operate or adjust this product, please read these
instructions completely.
Build-up Unit 

2
Safety precautions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, 
DO NOT REMOVE COVER (OR  BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
The...

3
Contents
Safety precautions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Overview  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Operating precautions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

4
Controls and their functions
1
2
3
1Lens guide
The 2/3zbox-type lens is attached by hooking it onto this
guide.  Align the guide pin of the lens with the center
groove, and attach.
2Lens anchoring knob
This is rotated clockwise to anchor the lens.
3Lens connector
Lens connector (57-20360 made by DDK)
Front Panel
5
46
4Camera mounting base
This is used to attach the camera.  For details, refer to
the operating instructions of the camera concerned.
5Optical fiber cable for connecting camera [CAM]
Use...

5
7Screw hole for mounting tripod (3/8-16UNC)
This is used to attach the unit to a tripod or other
accessory.
7
Bottom Panel
8Hook for securing cable 
The optical fiber cable from the CCU is fastened to this
hook.
9Clip
This is used to attach the accessories.
98
Right Side Panel
Controls and their functions 

:Cable clamp
This is used to clamp the optical fiber cable from the
CCU.
;Optical fiber connector
Power main circuit breaker
This is the main circuit-breaker for the units power
supply.  If the circuit breaker has been tripped by an
overcurrent or for some other reason, check the cause,
take the appropriate measures to remedy the problem,
and then reset the circuit breaker by pressing the circuit
breaker button.
?AC OUTLET reset switch
This cuts off the AC output when it drops below the
minimum voltage...

7
ERET B switch [RET B]
This is used to select the RET B switch.  When it is
lighted, the video signals of RET B selected by the
camera are output to the viewfinder.
FUser switch [USER SEL]
This enables control to be exercised over the ON/OFF
status of the items selected on the camera’s menus.
GVF DETAIL switch [VF DETAIL]
This is used to vary the amount of detail to be provided
for the viewfinder’s video output.
HMONITOR output selector switch [MONI SEL]
This is used to select the viewfinder’s video...

Mounting the camera
1Mount the camera on the camera mounting base, and
slide the camera toward the front along the groove until it
clicks into place.
Detaching the camera from the camera mounting base
While pushing the red lever, move the black lever in
the direction of the arrow, and slide the camera
toward the back.

If the pin of the camera mounting base fails to return
to its original position after the camera has been
detached, push the red lever again and
simultaneously move the black lever in the...

9
Connections
≥Connect the multi-format camera (and lens) to the build-up unit as shown in the figure below.
≥Connect the cable from the CCU to the connector on the build-up unit.
≥Connect the cable of the build-up unit to the connector on the multi-format camera.
ROP ONCLOSE
5600K OFFFLAREGAMMA ONBLKOFFGAMMAKNEE ONAUTOOFFKNEECLIP OFFWHITECLIPWHITEONMATRIX
MATRIXOFFHD. DTL
HD. DTLOFFSD. DTL
SD. DTLBLACKWHITERSHADINGGBKNEEGAMMABLKUNDOPEDFLAMEGAMMAGAINSYSTEM FUNC
BAR TESTCHARACTERRSTOPT FAN...

VF  POWERFRONT
TALLY
ON/OFFVF  MARKERCURSOR
PIPMENU  SELECTONH–POSIOFF12345 ABCDE
1 2 RET  A RET  B USER  SELCENTER
MARKER
FILTERLOCALNDCC
V–POSIWIDTHHEIGHTVF  DETAILMONI  SELEXTx0.8Y/G BRG
10
External dimension drawings
23-1/15z(585 mm) 12-5/8z(320 mm)
13-5/16z (337.5 mm)