Panasonic Bluray Disc Home Theater Sound System Sc Btx70 Operating Instructions

							11
RQT9479
Broadband Network Connections
AC power supply cord connection
The following services can be used when this unit is connected to the Internet via a broadband connection.
≥ Firmware can be updated ( >29)
≥ You can enjoy the BD-Live ( >19)
≥ You can enjoy the VIERA CAST ( >29)
≥Use shielded LAN cables when c onnecting to peripheral devices.
≥ With installation where your broadband modem is connected  directly to your PC, a router must be installed.
≥ Use a router that supports 10BASE-T/100BASE-TX.
≥ In case all available connection on your rout er is being used, a hub or switch can be installed to provide additional connectio ns.
≥ When operating the VIERA CAST, use high-speed Internet service no less than 1.5 Mbps for SD (Standard Definition) and 6 Mbps 
for HD (High Definition) picture qua lity by your local broadband company.
– If using slow Internet connection, the video may not be displayed correctly.
≥ After physically connecting this unit to your broadban d connection, some configuration is required. (>30)
≥ Inserting any cable other than a LAN cable in the LAN terminal can damage the unit.
Main unit
LAN
Shielded LAN cable 
(not included)
Internet
Broadband router, etc.
Telecommunications equipment 
(modem, etc.)
NOTE
1AC power supply cord
Main unit1
AC power supply cord (included)             
To a household AC outlet
(AC 120 V, 60 Hz)
Connect only after all other connections are complete.
Conserving power
The main unit consumes a small amount of AC power, even when it is
 turned off (approx. 0.2 W). To save power when the unit is not to 
be used for a long time, unplug it from the household AC outlet.
You will need to reset some memory items after plugging in the main unit.
NOTE
TIPS
Getting started 
BTX70PP_eng.book  11 ページ  ２００９年６月２４日　水曜日　午後３時４２分 
						

							12
RQT9479
Operating the sliding door
Press [DISC  below)
Select the aspect to suit your TV and preference.
≥ Wireless System  (Displayed only when c onnecting the optional 
Panasonic wireless system 
(SH-FX70))
If an optional digital transmitter is  inserted, it is required to 
specify the current settings.
≥ Speaker check
Check if the connection to each speaker is valid.
≥ Speaker Output  (Displayed only when connecting the optional 
Panasonic wireless system 
(SH-FX70))
Make surround sound settings for speaker output.
≥ TV Audio
Select the audio input connection from your TV.
For AUX connection ( >9): Select “AUX”.
For OPTICAL DIGITAL IN connection (>9): Select “DIGITAL IN 1”.This will be the TV Audio setting for VIERA Link “HDAVI Control”. (>25)To return to the previous screen, press [RETURN].7 Press [OK] to finish the EASY SETUP.
RADIO/EXT-IN
[DISC \b OPEN/CLOSE][iPod \b OPEN/CLOSE]
≥Do not open or close the sliding door by hand.≥Keep your hands away for the sliding door while it is opening or closing. Your hand or clothing’s, etc. might get caught inside  the door.≥Keep your fingers away from the sliding door when it  is closing to avoid possible minor injuries.
≥ Do not leave the disc side of the sliding door open. Dirt may mount on the lens.
≥ Do not touch the lens or other parts of the laser pickup.
≥ During disc playback the sliding door will not open when [iPod  27)
– If [iPod  27)
≥ If the sliding door is opened to the left with [DISC  
						

							13
RQT9479
Showing START menu
Some functions of this unit can be operated from the START menu.
1Press [ Í] to turn on the unit.
2 Press [START].
≥Items displayed vary according to the chosen selector and media.3 Press [ 3,4] to select the item and press [OK].
ItemsFunctions
Playback DISC
Playback Starts playing disc/SD card.
Top Menu Shows the disc top menu.
Menu Shows the media menu.
To play AVCHD (>18)
To play MPEG2 ( >18)
To play MP3, CD ( >22)
To play JPEG ( >20)
Shows the iPod menu.( >28)
To play “Music”
To play “Videos”
To play “All (iPod display)”
For “Playback Mode”
Network Display Home screen of VIERA CAST ( >29)
Input Select Select the source.
BD/DVD/CD:
To play BD-Video, DVD-Video, AVCHD 
(> 16 to 19)
To play JPEG ( >20)
To play MP3, CD ( >22)
SD card :
To play AVCHD ( >18)
To play MPEG2 ( >18)
To play JPEG ( >20)
iPod:
To play iPod contents ( >28)
FM:
To enjoy the FM radio ( >23)
AUX (TV) *
1:
To enjoy TV broadcasts with this unit’s speakers (> 24)
DIGITAL IN 1 (TV) *
1:
To enjoy TV broadcasts with this unit’s speakers (> 24)
DIGITAL IN 2 (CABLE/SAT) *
2:
To enjoy audio from other devices with this unit’s speakers ( >24)
*1 “(TV)” is displayed next to items set for TV AUDIO input. ( >25, 
Setting the TV audio for VIERA Link “HDAVI Control”)
*2 “(CABLE/SAT)” is displayed next to DIGITAL IN 2 when set for  CABLE/SAT AUDIO input. ( >25, Setting the TV audio for VIERA 
Link “HDAVI Control”)
Sound(Equalizer) Flat: Cancel (no effect is added).
Heavy:
Adds punch to rock.
Clear:
Clarifies higher sounds.
Soft:
For background music.
Other Functions Setup: You can change the unit’s settings using Setup menu ( >34).
Card Management: Formatting SD cards/Deleting data ( >19)
Playlists: You can play playlists created on DVD-VR.
Press [ 3,4,2,1] to select the playlist and press [OK].
OK
START
OK
START
Menu
OKRETURN
Other Functions
Playback DISCTo p  M e n u
Home theater
START
BD-Video
Input SelectSound(Equalizer)
Network
e.g., [BD-V]
OKRETURN
BD/DVD/CDSD card
Home theater STARTInput Select
BD-Video
iPod
AMFM
DIGITAL IN 1 (TV)DIGITAL IN 2
AUX 
SD
e.g.,  [BD-V]
Getting started 
BTX70PP_eng.book  13 ページ  ２００９年６月２４日　水曜日　午後３時４２分 
						

							14
RQT9479
Selecting the playback source
Selecting the source from the START menu
You can select sound modes, desired source, or access playback/menus by using 
the START menu.
1 Press [ Í] to turn on the unit.
2 Press [START] to show the START menu.
3 Press [ 3,4] to select the item and then 
press [OK].
≥ To exit press [START].4 Press [ 3,4] to make the setting.
When “Input Select” is selectedYou can select a desired source from the menu.
≥BD/DVD/CD, SD card, iPod, FM, AUX*1, DIGITAL IN 1*1, 
DIGITAL IN 2*2 ( > 13)
*1 “(TV)” is displayed next to items set for TV AUDIO input. 
(> 25, Setting the TV audio for VIERA Link “HDAVI 
Control”)
*2 “(CABLE/SAT)” is displayed next to DIGITAL IN 2 when set  for CABLE/SAT AUDIO input. ( >25, Setting the TV audio for VIERA Link 
“HDAVI Control”)
When a disc is loaded or a SD card is inserted, you can also access playback or 
menus from the START menu. e.g., [BD-V]
Selecting the source with the remote control
Press To select
BD/DVD/CD or SD ( >16)
IPOD (iPod) ( >27)
Each time you press the button:FM ( >23)
AUX*1:  For audio input through the AUX terminal.  (>24)
D-IN1 (DIGITAL IN 1*1): (> 24)
D-IN2 (DIGITAL IN 2*2): (> 24)*1 “(TV)” is displayed next to items set for TV AUDIO input. 
(> 25, Setting the TV audio for VIERA Link “HDAVI Control”)
*2 “(CABLE/SAT)” is displayed next to DIGITAL IN 2 when set  for CABLE/SAT AUDIO input. ( >25, Setting the TV audio 
for VIERA Link “HDAVI Control”)
Press [BD/SD], [iPod], [RADIO/EXT-IN] on the main unit to select source from the 
main unit.
≥ Confirm the audio connection to the AUX or OPTICAL DIGITAL IN 
terminals on the main unit when you select the corresponding sources. 
(> 9 to 10)
≥ Reduce the volume on the TV to its minimum, and then adjust the 
volume of the main unit.
OK
BD/SDiPodEXT-INRADIO
START
OK
RADIO/EXT-IN
BD/SD
iPod
START
OKRETURN
Home theaterSTART
No Disc
Input Select
Network
Other Functions
Sound(Equalizer)
Menu
OKRETURN
Other Functions
Playback DISCTo p  M e n u
Home theater START
BD-Video
Input SelectSound(Equalizer)
Network
Playback/menu access
BD/SD
iPod
EXT-INRADIO
NOTE
Getting started 
BTX70PP_eng.book  14 ページ  ２００９年６月２４日　水曜日　午後３時４２分 
						

							15
RQT9479
Enjoying sound from all speakers and 
various sound effects
≥The following sound effects/modes may not be available or have  no effect with some sources, or when headphones are used (>16).≥You may experience a reduction in sound quality when these sound effects/modes are used with some sources. If this occurs, turn  the sound effects/modes off.
1Press [SOUND] several times to select the mode.≥You can also press [SOUND] and then [ 3,4] to select the 
mode.
≥ The selected effect will only be displayed on the main unit.
2While the selected mode is displayed
Press [ 2,1] and select the desired setting.
∫ When only the supplied speakers are connected.≥Underlined items are the factory presets.
Press [SURROUND] several times to select the effect.≥You can also press [SURROUND] and then [3, 4] to select the mode.≥The selected effect will only be displayed on the main unit.
When selecting the MANUAL effects below.While “MANUAL” is displayed
Press [ 2,1] and select the desired effect.
∫ When optional surround, surround back speakers are 
connected with the optional Panasonic wireless system 
SH-FX70.
When 1 or 2 optional Panasonic wireless system(s) SH-FX70 are 
connected and the appropriate settings have been made in the “EASY 
SETUP” the following sound effects will be available.
≥Underlined items are the factory presets.
Changing the sound modes
Available sound modes
Mode Setting
EQ:
(Equalizer) You can select sound quality settings.
–
FLAT (Flat): Cancel (no effect is added).
– HEAVY (Heavy): Adds punch to rock.
– CLEAR (Clear): Clarifies higher sounds.
– SOFT (Soft): For background music.
SUB W:
(Subwoofer 
level) This unit will change the settings for the amount of 
bass depending on the source.
However you can also adjust the amount of bass for 
the source being played.
– 1 (Weakest effect)
–2
–3
– 4 (Strongest effect)
≥
The setting you make is retained, and recalled 
every time you play the same type of source.
W. S.:
(
Whisper-mode 
surround) You can enhance the surround effect for low volume 
sound.
(Convenient for late night viewing.)
–ON
–OFF
OK
SOUNDSURROUND
-CH SELECT-CH SELECT
SURROUND
SOUND
Enjoying surround sound effects
Available surround sound effects for 2.1 ch settings
Effect
Setting
7.1CH VS*1, 2, 4:You can enjoy 5.1/7.1-channel surround-like effect 
using 2.1-channel speakers.
This function is effective only when playing 4.1 ch 
sources or above.
2CH STEREO:You can play any source in stereo without the 
surround sound effect.
DOLBY 
VIRTUAL 
SPEAKER*
3, 4
You can enjoy a surround sound effect similar to 5.1 
ch (Dolby Digital or DTS) with any audio source, 
using the included front speakers and the subwoofer. 
You can also enjoy a surround sound effect with 
stereo sources such as CDs.
REFERENCE
Standard mode
WIDE
≥This mode widens the acoustic field of the front 
speakers. This has a good effect when there is 
little space between the speakers.
Available surround sound effects for 4.1 ch or 
6.1 ch settings
Effect Setting
STANDARD
: Sound is output as it was recorded/encoded.
Speaker output varies depending on the source.
MULTI-CH:
You can enjoy sound from the front speakers, as well 
as the surround speakers even when playing a 
2-channel sound or non-surround sound.
MANUAL: – DOLBY PL II MOVIE*4:
Suitable for movie software, or the one recorded 
in Dolby Surround.
– DOLBY PL II MUSIC
*4:
Adds 5.1-channel effects to stereo sources.
– S.SURROUND: You can enjoy sound from all speakers with 
stereo sources.
– 2CH STEREO:
You can play any source in stereo. Sound will be 
output to the front speakers and the subwoofer only 
and without the surround sound effect.
*1 7.1ch VS is not available when the audio source currently playing is 2.1 ch, 3.1 ch.
*2 The 7.1-channel surround-like effect will only f unction when playing 6 or more channel sources.
*3 Dolby Virtual Speaker is not available and “NOT CONDITIONAL” is displayed when the audio source currently playing is 3.1 ch, 3 ch, 1.1 ch or 1 ch.*4 The effects do not work when audio is output from the HDMI AV OUT terminal.
≥“NOT CONDITIONAL” is displayed on the main unit if the setting is not active.
When the unit has been set for 4.1 ch or 6.1 ch output, it is not possible to select the sound effects for 2.1 ch or vice versa.
NOTE
TIPS
Getting started 
BTX70PP_eng.book  15 ページ  ２００９年６月２４日　水曜日　午後３時４２分 
						

							16
RQT9479
Basic operations
Instructions for operations are generally described using the remote control in these operating instructions.
PreparationTurn on the TV and select the appropriate video input on the TV.
1Press [ Í] to turn on the unit.
2 Insert the media. ( Bsee above)
Play starts. ≥
If a media with data in different file formats is inserted, the file 
selection menu is displayed. Press [ 3,4] to select the desired file 
format and press [OK].
≥ If a menu is displayed, press [ 3,4 ,2, 1] to select the item and 
press [OK].
≥ If the screen prompting you to use the color buttons appears, 
continue to operate with the color buttons on the remote control.
≥
If play does not start, press [ 1PLAY].
≥ When [ 1PLAY] is pressed with the sliding door open to either side, 
the sliding door will close. If a disc is inserted, playback will start.
≥ Disc playback will stop and the sliding door will open if [iPod < OPEN/CLOSE] is pressed twice during disc playback.
– The resume play function may operate with some discs.
≥ Be sure to press [DISC  51).
Stop
PlayPause
,VOLUME
Skip/Search/Slow-motion
BD/SD, iPod
RADIO/EXT-IN
RADIO/EXT-IN
Headphones (not included)
Headphone plug type:  ‰3.5 mm (1/8z) stereo mini plug
≥ Reduce the volume before connecting.
≥ Audio is automatically s witched to 2-channel stereo.
≥ To prevent hearing damage, avoid listening for prolonged periods of time.
Excessive sound pressure from earphones  and headphones can cause hearing loss.
Label facing up
1
Press [DISC <
OPEN/CLOSE] to open the sliding door.2Place the disc onto the spindle in the center and 
then push the disc down until it clicks into place.
≥When inserting or removing a disc, tilt the disc so 
as not to touch the sliding door.
≥To remove the card, press on the center of the card 
and pull it straight out.
≥Press [DISC  
						

							17
RQT9479
∫To adjust the volume.
It is also possible to adjust the volume with [ s r VOLUME] on the 
main unit.
∫ To mute the sound.
Press to adjust the volumeVOL
Press to mute the sound
“MUTE” flashes on the unit’s 
display.
≥To cancel, press [MUTE] again or 
adjust the volume.
≥ Muting is canceled if the unit is 
turned off. e.g.
MUTE
Other operations during play (These functions may not work depending on the media.)
Stop
The stopped position is memorized.
Resume play function
Press [
1PLAY] to restart from this position.
≥ The position is cleared if the sliding door is opened or you press 
[∫STOP] several times to display “STOP” on unit’s display.
≥ [BD-V] : On BD-Video discs including BD-J ( >51), the resume 
play function does not work.
≥ [CD]  [MP3]  [MPEG2]  : The position is cleared if the unit is turned off.
Pause
≥Press [ ;PAUSE] again or [ 1PLAY] to restart play.
Search/Slow-motion
The speed increases up to 5 steps.
≥Press [ 1PLAY] to revert to normal playback speed.
≥ For some discs, the speed may not change.
Search
While playing, press [SEARCH 6] or [SEARCH 5].
≥ [BD-V] [AVCHD]  [DVD-VR]  [DVD-V]  :
Audio is heard during first level of forward search.
≥ [MPEG2]  : Audio is not heard during all levels of search.
≥ [CD]  [MP3]  : The speed is fixed to a single step.
Slow-motion
While paused, press [SEARCH 6] or [SEARCH 5].
≥ [BD-V] [AVCHD]  : Forward direction [SEARCH 5] only.
≥ [DVD-VR]  : If continued for approx. 5 minutes, slow-motion play 
pauses automatically.
Skip
Skip to the title, chapter or track you want to play.
≥ Each press increases the number of skips.
Direct Play
During playback, you can access  specific recordings or scenes 
through direct entry of the numbered buttons.
Play starts from the selected title or chapter.
[BD-V] [AVCHD]
e.g., 5: [0]  B [0] B [5]
15: [0]  B [1] B [5] [DVD-V]
e.g., 5: [0] 
B [5]
15: [1]  B [5]
≥ While stopped (the image on the right is 
displayed on the screen), the title is designated. 
While playing, the chapter is designated.
STOP
PAUSE
SEARCH
SLOW
SEARCH
SKIPSKIP
[email protected]
456
78
0
9
ABC DEF
JKL
MNO
TUV
GHI
QRS P
XYZ W
_,
Frame-by-frame
While paused, press [2] (2; ) or [ 1] (;1 ).
Each press shows the next frame.
≥ Press and hold to change in succession forward or backward.
≥ Press [ 1PLAY] to revert to normal playback speed.
≥ [BD-V] [AVCHD]  : Forward direction [ 1] (;1) only.
Changing audio during play
[BD-V] [AVCHD]  [DVD-V]
You can change the audio channel num ber each time you press the 
button. This allows you to change the soundtrack language ( >32, 
Soundtrack), etc.
≥ [BD-V]  When “BD-Video Secondary Audio” ( >35) is set to “On”, 
Dolby TrueHD, Dolby Digital Plus, DTS-HD Master Audio and 
DTS-HD High Resolution Audio are output as Dolby Digital or DTS 
Digital Surround regardless of this setting.
[DVD-VR] [MPEG2] AudioLR >AudioL >Audio R
^-----------------------------------------}
Chapter playback [DVD-VR]
1 Insert a disc ( >16).
2 While “Title View” screen is displayed
Press [ 3,4] to select the title and press [SUB MENU].
3 Press [ 3,4] to select “View Chapters” and press [OK].
4 Press [ 2,1] to select the chapter and press [OK].
OK
AUDIO
English is selected
Soundtrack1 ENGDigital  3/2.1ch
e.g.,  [DVD-V]
PlayDVD-RAM(VR)
AudioLR“AudioLR” is 
selected
Properties
View Chapters
To Picture
To display the title properties 
(recording date, etc.)
 Playing still pictures ( >20)
To select the chapter
Playback
BTX70PP_eng.book  17 ページ  ２００９年６月２４日　水曜日　午後３時４２分 
						

							18
RQT9479
Basic operations 
1Press and hold [–CH SELECT] for 3 seconds to 
activate the speaker setting mode.
2 Press [–CH SELECT] several times to select the 
speaker.
Each time you press the button:
LR—)  RS_)  RB_)  LB_)  LS_)  SW
^""""""""""""""""""""""""b
L R: Front speaker (left and right)
RS: Surround speaker (right)
RB: Surround back speaker (right)
LB: Surround back speaker (left)
LS: Surround speaker (left)
SW: Subwoofer
≥ “RS”, “RB”, “LB” and “LS” will only be displayed if the optional 
Surround, Surround back speakers are connected.
– The channels not included in the playing audio will not be displayed 
(subwoofer is displayed even if it is not included).
(When “L R” is selected)
3 Press [ 2,1] to adjust the balance of the front 
speakers.
When “SW” or the optional surround, surround back speakers are 
connected and selected in step 2 .
4Press [ 3] (increase) or [ 4] (decrease) to adjust 
the speaker level for each speaker.
s6 dB to  r6 dB
[AVCHD]  [MPEG2]
It is possible to playback the High Definition (AVCHD format) video 
recorded on a Panasonic High definition Video Camera on a 
DVD-RAM/R/RW/R DL/+R/+RW/+R DL, or SD card and Standard 
Definition (MPEG2 format) Video recorded on the Panasonic SD Video 
Camera on a SD card.
1 Insert a disc or SD card. ( >16)≥The “Video (AVCHD)” or “Video (MPEG-2)” screen is displayed.
≥ If media containing data in different file formats is inserted, the 
file selection menu may be displayed.
Press [ 3,4] to select “Play Video (AVCHD)” or “Play Video 
(MPEG-2)” and press [OK].
2 Press [ 3,4, 2,1] to select the title and press 
[OK].
Status messages
The status messages give you information about what is currently 
being played. Each time you press [STATUS], the information 
displayed will change.
Screen Aspect
When black bars are shown at the top, bottom, left, and right sides of 
the screen, you can enlarge the image to fill the screen.
1 Press [SUB MENU].
2 Press [ 3,4] to select “Screen Aspect” and press [OK].
3 Press [ 2,1] to select “Side cut” or “Zoom” and press [OK].
Normal: Normal output
Side cut: The black bars on the right and left sides of the 16:9  image disappear and the image is enlarged. Please note 
that the right and left sides of the image are cut off when 
the black bar is not displayed.
Zoom: The black bars on the top and bottom sides of the 4:3 
image disappear and the image is enlarged. Please note 
that the top and bottom sides of the image are cut off 
when the black bar is not displayed.
≥ [BD-V]  [DVD-V] : “Side cut” does not have any effect.
≥ When “TV Aspect” ( >36) is set to “4:3” or “4:3 Letterbox”, the 
“Zoom” effect is disabled.
Setting the sleep timer
1 Press and hold [–SLEEP] for 3 seconds.
2 While “SLEEP ££” is displayed, 
Press [–SLEEP] several times to select the time (in minutes).
SLEEP 30  ) SLEEP 60  ) SLEEP 90  )SLEEP 120  )OFF
^""""""""""""""""""""""""""""""""b
e.g.
To confirm the remaining time
Press and hold [–SLEEP] for 3 seconds.
≥ The sleep timer cannot be set while the Setup menu is displayed.
≥ The sleep timer will be canceled in the following cases.
– When the sleep timer is set to “OFF”.
– When this unit is turned off from the remote control, main unit or via  the VIERA Link.
STATUS
Play BD-Video 
 T1     C1     0:05.14 0:20.52 

Type of disc Play status
T:  T i t l e
C: Chapter
PL: Playlist Items change 
depending on the 
disc played.
Elapsed time in the title
Current position Total time
No display
Depending on the kind of disc or the playback status, 
this display may not appear.
e.g.,  [BD-V]
-SLEEP
SLP
Adjusting speaker level during play
Adjusting the balance of the front speakers
Adjusting the speaker level of the subwoofer 
optional Surround, Surround back speakers
Playing video recorded on a Video 
Camera or Video Recorder
≥It may pause for a few seconds between images when 
editing such as partial deletion is performed.
≥ High definition video (transfer rate of 18 Mbps or faster) 
cannot be played back correctly if it was recorded on a 
DVD compatible to double speed or slower.
To return to the previous screen
Press [RETURN].
To exit the screen
Press [TOP MENU/DIRECT NAVIGATOR].
To switch from other menus to AVCHD or MPEG2 menu
(If the media contains data in different file formats)
1) Press [START].
2) Press [ 3,4] to select “Menu” and press [OK].
3) Press [ 3,4] to select “Play Video (AVCHD)” or “Play 
Video (MPEG-2)” and press [OK].
SD Card
Play Video (AVCHD)
Select an action or press [RETURN].
Play Pictures (JPEG)
OK
RETURN
SUB 
MENU
Play Video (MPEG-2)
e.g.,  [SD]
NOTE
TIPS
Playback
BTX70PP_eng.book  18 ページ  ２００９年６月２４日　水曜日　午後３時４２分 
						

							19
RQT9479
Enjoying BD-LIVE or BONUSVIEW in 
BD-Video
[BD-V]What is BONUSVIEW?
BONUSVIEW allows you to enjoy functions such as picture-in-picture or secondary audio etc., with BD-Video supporting BD-ROM Pro file 1 version 
1.1/ Final Standard Profile.
What is BD-Live?
In addition to the BONUSVIEW function, BD-Video supporting BD-ROM Profile 2 that has a network extension function allows you to  enjoy more 
functions such as subtitles, exclusive images and online games by connecting this unit to the Internet. In order to use the Int ernet feature, you must 
have this unit connected to a broadband network ( >11) .
≥ These discs may not be on sale in certain regions.
≥ The usable functions and the operating method may vary with each disc, please refer to the instructions on the disc and/or visi t their website.
Playing secondary video (picture-in-picture) and secondary audio
Secondary video can be played from a disc compatible with the picture-in-picture function.For the playback method, refer to the instructions for the disc.
To turn on/off secondary video
1Press [DISPLAY].
2 Press [ 3,4] to select the “Disc” menu and 
press [ 1].
3 Press [ 3,4] to select the “Signal Type” menu 
and press [OK].
4 Press [ 3,4] to select the “Video” under 
“Secondary Video” menu and press [ 1].
5 Press [ 3,4] to select the “On” or “Off”
6 Press [RETURN] to exit.
To turn on/off audio with the secondary video
1 Press [DISPLAY].
2 Press [ 3,4] to select the “Disc” menu and press [ 1].
3 Press [ 3,4] to select the “Signal Type” menu and press [OK].
4 Press [ 3,4] to select the “Soundtrack” under “Secondary Video” menu and 
press [ 1].
5Press [3,4] to select the “On” or “Off”
When “On” is selected, press [1] and then press [3,4] to select the language.6 Press [RETURN] to exit.
≥Discs may not always be played back according 
to the settings on this unit, as certain playback 
formats are prioritized on certain discs.
≥ Only the primary video is played during search/
slow-motion or frame-by-frame.
≥ When “BD-Video Secondary Audio” in “Digital 
Audio Output” is set to “Off”, secondary audio will 
not be played. Please check that “BD-Video 
Secondary Audio” is set to “On” ( >35).
≥ When the secondary video is turned off, the 
secondary audio is not played.
Secondary video
Primary videoNOTE
Enjoying BD-Live discs with Internet
Many BD-Live compatible discs require content to be downloaded onto an SD 
card ( >52, Local storage) in order to access the available BD-Live features.
≥ An SD card with 1 GB or more of free space (SD Speed Class Rating 2 or higher) 
needs to be inserted prior to inserting the BD-Live compatible disc.
Some BD-Live content available on the Blu-ray discs may require an Internet 
account to be created in order to  access the BD-Live content. Follow the 
screen display or instruction manual of the disc for information on acquiring 
an account.
Preparation≥ Connect to the network. ( >11 )
1 Insert an SD card. ( >16)
≥If the SD card menu screen is displayed, press [BD/SD] to select BD/DVD.
2 Insert the disc. (> 16)≥For operation method, refer to the instructions on the disc.
To use the above functions, it is recommended that you format the card on this unit.
Format the card using the following procedures.
BD-Video data, such as secondary video recorded on the card, can also be erased 
with the following procedures.
Formatting SD cards/Deleting dataIt is impossible to restore data after formatting the card or erasing the data.
Once a card is formatted, all data including those recorded on the PC is erased as 
well, even if the data were protected with other equipment.
Confirm whether the card can be formatted.
1) Insert an SD card ( >16).
2) Press [START].
3) Press [3,4] to select “Other Functions” and 
press [OK].
4) Press [ 3,4] to select “Card Management” and 
press [OK].
5) Press [ 3,4] to select “BD-Video Data Erase” 
or “Format SD Card” and press [OK].
6) Press [ 2,1] to select “Yes” and press [OK].
7) Press [ 2,1] to select “Start” and press [OK].
≥ If you experience any problems, first, try 
formatting the SD card in this unit.
≥ A message may be displayed when the SD card 
doesnt have enough storage capacity for 
BD-Live content.
Please make space available on the current SD 
card, or insert another SD card.
≥ While using this feature, do not remove the SD 
card. Doing so will cause playback to stop.
≥ The unit must be connected to the Internet and 
set up ( >30) to use the BD-Live functions. 
“BD-Live Internet Access” may need to be 
changed for certain discs ( >34).
≥ When discs supporting BD-Live are played 
back, the player or disc IDs may be sent to the 
content provider via the Internet. You can 
restrict Internet access. (>  34, “BD-Live 
Internet Access”)
≥ The unit is connected to the Internet when 
BD-Live functions are used, generating 
communication charges.
≥ The playback may be paused depending on the 
communication environment.
Some functions may be disabled to prevent 
skipping to sections that have not been 
downloaded, etc.
Card Management No. of Files    6
Free space    300 MB
SD card
Format this SD Card.OK
RETURN
BD-Video Data EraseFormat SD Card
NOTE
Playback
BTX70PP_eng.book  19 ページ  ２００９年６月２４日　水曜日　午後３時４２分 
						

							20
RQT9479
Playing still pictures
[JPEG]
Playback of a BD-RE, DVD-RAM/R/R DL, CD-R/RW, or SD card with still pictures recorded.
(About structure of folders D 41, “Structure of folders that can play back on this unit”)
1 Insert a disc or an SD card. ( >16)
BD-RE, DVD-RAM“Album View” screen is displayed.
≥When the “Title View” screen is displayed, press [G] to switch to the “Album 
View” screen.
≥ If the DVD-RAM containing both JPEG and AVCHD format is inserted, the 
file selection menu may be displayed.
DVD-R/R DL, CD-R/RW, SD card≥If a media containing data in different file formats is 
inserted, the file selection menu may be displayed.
Press [ 3,4] to select “Play Pictures (JPEG)” and press [OK].
“Picture View” screen is displayed
B  Go to step  3
2Press [ 3,4,2,1] to select the album and press [OK].
3 Press [ 3,4,2,1] to select the still picture and press 
[OK].
≥ Small-sized still pictures are displayed with a 
frame.
≥Press [ 2,1] to display the previous or next still 
picture.
≥ Press [SKIP :, SKIP 9] to show other 
pages.
To return to the previous screen
Press [RETURN].
To exit the screen
Press [TOP MENU/DIRECT NAVIGATOR].
DVD-RAM/R/R DL, CD-R/RW, SD card
To switch from other menus to JPEG menu
(If the media contains data in different file 
formats)
1) Press [START].
2) Press [ 3,4] to select “Menu” and press 
[OK].
3) Press [ 3,4] to select “Play Pictures (JPEG)” 
and press [OK].
e.g.,  [SD]
SD Card
Play Video (AVCHD)
Select an action or press [RETURN].
Play Pictures (JPEG)
OK
RETURN
SUB 
MENU
Play Video (MPEG-2)
e.g.,  [SD]
RG\f
DIRECT NAVIGATORAlbum ViewDVD-RAM(VR)Video Picture
OKPress [OK] to go to Picture View  Previous Next SlideshowRETURNVideo
Picture Page  02/02
 Total 8
106_DVD
 Total 1312/9/2006 
SUB
MENU
e.g.
NOTE
TIPS
Playback
BTX70PP_eng.book  20 ページ  ２００９年６月２４日　水曜日　午後３時４２分