Panasonic Bluray Disc Home Theater Sound System Sc Btt490 Owners Manual

Getting started 
11VQT3X49
STEP 2: Preparing the speakers
1Attach the stand to the base.
2Tighten the 3 screws (supplied) securely.
3Attach the speaker.(Continued on the next page)
Assembling the front speakers
Thread the speaker 
cable through the base.
Slide the speaker cable 
into the groove.
Speaker cable
SC-BTT490P_eng.book  11 ページ  ２０１２年２月２２日　水曜日　午前９時１分 

12VQT3X49
4Tighten the screw (supplied) securely.
	≥To prevent damage or scratches, lay down a soft cloth and perform assembly on it.
Attach the speaker cable sticker (supplied) and connect the speaker cables to the speakers.≥When connecting speakers with the optional wireless system SH-FX71  (> 10), use the supplied 
speaker cables of SH-FX71.
e.g., Surround speaker
Connecting the speaker cables
SURROUNDLch
Push r: White
s: Blue line
Speaker cable sticker (supplied) Connector
Speaker indication
Speaker...

Getting started 
13VQT3X49
STEP 3: Connections
Turn off all equipment before connection and read the appropriate owner’s manual.Do not connect the AC power supply cord until all other connections are complete.
Connect the speaker cables to the terminals of the same color.
Speaker connection
SC-BTT490P_eng.book  13 ページ  ２０１２年２月２２日　水曜日　午前９時１分 

14VQT3X49
∫HDMI
≥ Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized.
It is recommended that you use Panasonic’s HDM I cable. When outputting 1080p signal, please use 
HDMI cables 5.0 meters (16.4 ft.) or less.
Recommended part number (High Speed HDMI Cable):
RP-CDHS15 (1.5 m/4.9 ft.), RP-CDHS30 (3.0 m/ 9.8 ft.), RP-CDHS50 (5.0 m/16.4 ft.), etc.
≥Audio will be output through the systems speakers when “Off” is selected in “HDMI Audio Output”. (>37)
∫TV Audio
≥To output TV audio...

Getting started 
15VQT3X49
	≥Use an FM outdoor antenna if radio reception is poor.
Standard picture and better audio
Standard picture and audio
OPTICAL
OUT
L
VIDEO IN
R 
AUDIO IN
Optical digital audio 
cable (not supplied)
Video cable (not supplied)
L
VIDEO IN
R 
AUDIO IN
LR 
AUDIO OUT
Video cable (not supplied)
Audio cable (not supplied)
FM antenna connection
Affix this end of the antenna to a wall or 
pillar where the reception is best.
FM indoor antenna (supplied)
SC-BTT490P_eng.book  15 ページ...

16VQT3X49
∫When the connecting devices have an HDMI terminal
	HDMI standby pass-throughEven if this system is in standby mode, the audio and/or video signal from the device connected to the HDMI1 IN (CABLE/SAT) 
or HDMI2 IN terminal will be sent to the TV connected to the HDMI AV OUT terminal (the sound will not be output from this 
system). Even while the unit is in the standby mode, you can change the input signal HDMI1 IN (CABLE/SAT) or HDMI2 IN by 
pressing [EXT-IN] on the remote control.
∫When the...

Getting started 
17VQT3X49
The following services can be used when this unit is connected to broadband.
≥Firmware can be updated  (> 19)
≥ You can enjoy BD-Live ( >24)
≥ You can enjoy VIERA Connect ( >30)
≥You can access other devices (Home Network) (>31)
≥This unit supports Wi-Fi DirectTM and can make a 
wireless connection to wireless devices without 
router. You can use this function when enjoying Home 
Network feature, etc. Internet access is not available 
while connected via Wi-Fi Direct
TM. (>31,...

18VQT3X49
STEP 5: Settings
After connecting your new home theater for the 
first time and pressing [Í], a screen for the basic 
settings will appear.
Preparation
Turn on the television and select the 
appropriate video input on the television.
1Press [ Í].
Setup screen appears.
2Follow the on-screen instructions and 
apply the settings.
	≥ You can perform this setup anytime by selecting “Easy 
Setting” in the Setup menu. ( >39)
≥ If this unit is connected to a Panasonic TV (VIERA) 
supporting HDAVI...

Getting started 
19VQT3X49
3Enter your encryption key (password).
To enter your network name (SSID) manually
If your network name (SSID) is not displayed in 
step  1, follow these steps.
1 To display the network name (SSID) input 
screen:
Press [HOME]  > select “Others”  > [OK]  > 
select “Setup”  > [OK]  > select “Network” >  
[OK]  > select “Network Settings”  > [OK]  > 
select “Wireless Settings”  > [OK]  > select 
“Connection Setting” >  [OK] > select 
“Manual setting”  > [OK]
2 Press [OK] to select...

20VQT3X49
Inserting or removing 
media
≥When inserting a media item, ensure that it is 
facing the right way up.
≥ When removing the SD card, press the center 
of the card and pull it straight out.
≥ If you connect a Panasonic product with a USB 
connection cable, the setup screen may be 
displayed on the connected equipment. For 
details, refer to the instructions for the 
connected equipment.
≥ Use the front USB port when you connect a 
USB memory or a USB HDD. The USB port on 
the rear panel is only...