Panasonic Bluray Disc Home Theater Sound System Sc Btt268 Owners Manual

Getting started 
11
VQT3M40
STEP 3: Connections
Turn off all equipment before connection and read the appropriate owner’s manual.
Do not connect the AC power supply cord until all other connections are complete.
Connect to the terminals of the same color.
Speaker cable connection
Radio antenna connection
∫ Using an indoor antenna ∫Using an outdoor antenna
Use outdoor antenna if FM radio reception is poor.
A FM indoor antenna  (supplied)
B Adhesive  tape
Affix this end of the antenna where reception is...

12
VQT3M40
≥The basic connection is shown in the included Easy Setting Guide,  however, there are more connection examples to optimize 
your system setting.
	≥ Do not make the video connections through the VCR.
Due to copy guard protection, the picture may not be displayed properly.
≥ Turn off all equipment before connection.
∫ OPTICAL IN
≥After making the digital audio connection, make settings to suit the type of audio from your digital equipment. ( >20)
∫HDMI
The HDMI connection supports VIERA Link...

Getting started 
13
VQT3M40
≥When connecting to a TV using an HDMI cable, check the HDMI terminal on the TV. If the HDMI terminal is labeled 
“HDMI (ARC)”, you can connect the unit simply with a single HDMI cable.
≥ It is possible to playback 3D videos and 3D still pict ures by connecting this unit with a 3D compatible TV.
≥ For details, refer to the operating instructions of your TV.
∫ When the HDMI terminal on the TV is labeled “HDMI (ARC)”
A HDMI cable  (not supplied)
∫When the HDMI terminal on the TV...

14
VQT3M40
ARefer to the operating instructions of the 
respective devices for the optimal connections.
B Optical digital audio cable  (not supplied)
C Set Top Box (Cable/Satellite), etc.
Connection with Set Top Box, etc.
OPTICAL
OUT



OPTICAL
TV
e.g.,
To enjoy TV audio from this home theater 
system’s speakers:
1 Connect the STB and the main unit with the 
Optical digital audio cable (not supplied).
2 Select “DIGITAL IN” or “D-IN” as a source  (> 18).
SC-BTT268_P_eng.book  14 ページ  ２０１０年１２月１７日　金曜日...

Getting started 
15
VQT3M40
The following services can be used when this unit is connected 
to broadband.
≥ Firmware can be updated ( >17)
≥ You can enjoy BD-Live ( >21)
≥ You can enjoy VIERA CAST ( >29)
For details about connection method, refer to the instructions 
supplied with the connected equipment.
STEP 4: AC power 
supply cord 
connection
Connect only after all other connections are complete.
A AC power supply cord  (supplied)
B To a household AC outlet
Main unit
≥ This unit consumes a small...

16
VQT3M40
STEP 5: Easy setup
The Easy setup assists you to make necessary 
settings.
Follow the on-screen prompts to make basic settings for the 
system.
Preparation
Turn on your TV and select the appropriate video input mode (e.g., 
VIDEO 1, AV 1, HDMI, etc.) to suit the connections to this unit.
1Press [Í].
Setup screen appears.
If this unit is connected to a Panasonic TV (VIERA) 
supporting HDAVI Control 2 or later via an HDMI cable, 
then setting information on the TV such as “On-screen 
Language”...

Getting started 
17
VQT3M40
The configuration of your network is about to begin. If you 
failed to make the settings, refer to “When you experience 
problems with settings”.
Network Easy Setting (Home Network Connection Check)
Network Easy Setting (Internet Connection Check)
	≥Refer to the operating instructions of the hub or router.
≥ You can perform this setup anytime by selecting “Network Easy Setting” in 
the Setup menu. ( >34)
≥ You can redo these settings individually using “Network Settings”. (...

18
VQT3M40
Inserting or removing 
media
≥When inserting a media item, ensure that it is facing the right 
way up.
≥ While the reading indicator is displayed, do not turn off the 
unit or remove the media. Such action may result in loss of 
the media’s contents.
≥ When removing the SD card, press on the center of the card 
and pull it straight out.
∫ Selecting the source by the remote 
control
HOME menu
Major functions of this unit can be operated from the HOME menu.
Preparation
Turn on the television and...

Getting started 
19
VQT3M40
Enjoying sound effects 
from all speakers
1Press [SURROUND] several times to select 
the effect.
STANDARD
Sound is output as it was recorded/encoded.
Speaker output varies depending on the source.
MULTI-CHANNEL
You can enjoy sound from the front speakers, as well as 
the surround even when playing a 2-channel sound or 
non-surround sound.
MANUAL
≥The selected effect will only be displayed on the main 
unit.
2While “MANUAL” is displayed, press 
[2, 1] and select the desired...

20
VQT3M40
Playb ack
Playing video contents
[BD] [DVD]  [CD]  [SD]
1Insert the media.
If the menu is displayed, press [OK] or [ 3,4 ,2, 1] to 
select the item. ( >18)
2Press [ 3,4] to select the title and press 
[OK].
When a message screen is displayed while playing back 
3D compatible video software, play back in accordance 
with the instructions.
∫ To show menus
You can show Top Menu, DIRECT NAVIGATOR or Pop-up Menu.
Press [POP-UP MENU, TOP MENU].
≥Press [ 3,4, 2,1 ] to select the item and press [OK]....